Windows Vista SP1 May Not Install on Linux Dual Boot Systems Windows Vista SP1 मई नहीं स्थापित Linux को दोहरी बूट सिस्टम पर
With के साथ mass distribution of Windows Vista SP1 around the corner कोने के आसपास Windows Vista SP1 के जन वितरण , but it seems like Microsoft now facing another hiccup. , लेकिन यह माइक्रोसॉफ्ट की तरह अब एक और हिचकी का सामना करना पड़ रहा है. Microsoft recently acknowledges that users running a dual-boot system with Windows Vista Enterprise or Ultimate edition together with a Linux distro, and have installed the Linux bootloader into the MBR, will face problem or failure when installing the service pack. माइक्रोसॉफ्ट ने हाल ही कि उपयोगकर्ताओं, और Windows Vista Enterprise या एक distro Linux के साथ Ultimate संस्करण एक साथ के साथ एक दोहरा बूट सिस्टम चलाने के MBR में लिनक्स bootloader स्थापित किया है, जब इस सर्विस पैक स्थापित करने की समस्या है या असफलता का सामना करेंगे मान लेगा.
The conflict happens because one of the prerequisite update for Windows Vista SP1, इस संघर्ष के कारण होता है एक Windows Vista SP1 के लिए इस शर्त को अद्यतन की, KB935509 KB935509 , contains an update to the Windows Vista boot loader, and when upgrading to Windows Vista SP1, the original system's bootloader on system with BitLocker encrypted drive or encrypted boot partion, may have been replaced by open source bootloaders such as GRUB or LILO when installing Linux to dual boot with Windows Vista. , The Windows Vista बूट लोडर, और एक अद्यतन में शामिल है जब Windows Vista SP1, BitLocker एन्क्रिप्टेड ड्राइव या एन्क्रिप्टेड बूट partion के साथ सिस्टम पर मूल प्रणाली है bootloader को GRUB या LILO जैसे खुले स्रोत bootloaders जब Linux के अधिष्ठापन के द्वारा प्रतिस्थापित किया गया है मई उन्नयन Windows Vista के साथ दोहरी बूट करने के लिए.
Meanwhile, KB935509 contains an update to the BitLocker feature, which must ensure data integrity when updating. इस बीच, KB935509 जो जब अद्यतन डेटा अखंडता को सुनिश्चित करना चाहिए कि BitLocker सुविधा, के लिए एक अद्यतन शामिल हैं. Thus, after entering BitLocker PIN, BitLocker update performs a “chain of trust” integrity check on everything from the system's boot sequence, onboard TPM chip, the MBR (Master Boot Record) and into the operating system itself. इस प्रकार, BitLocker पिन में प्रवेश करने के बाद, BitLocker अद्यतन सिस्टम के बूट अनुक्रम, जहाज पर TPM चिप के MBR (मास्टर बूट रिकॉर्ड) से सब कुछ पर "अखंडता की जाँच विश्वास का एक" श्रृंखला प्रदर्शन और ऑपरेटिंग सिस्टम ही में. When the MBR's bootloader been replaced with LILO or GRUB in the case of dualbooting with Linux, the integrity checks will fail and the update will abort and stop, indirectly preventing SP1 from been installed. जब bootloader LILO या GRUB के साथ Linux के साथ dualbooting के मामले में बदल दिया गया कि MBR है, अखंडता चेक और असफल हो जायेगी अद्यतन गर्भपात और बंद, अप्रत्यक्ष रूप से रोकने SP1 स्थापित किया गया. Worse, on an encrypted boot partition, the system may not boot. , एक एन्क्रिप्टेड boot partition पर इससे भी बदतर, सिस्टम मई नहीं बूट.
Luckily, BitLocker is a feature for only Windows Vista Ultimate and Enterprise editions. सौभाग्य से, BitLocker केवल Windows Vista Ultimate और एंटरप्राइज संस्करणों के लिए एक सुविधा है. So different editions of Windows Vista which doesn't support BitLocker feature will not be affected, as KB935509 is not required to be installed. तो Windows Vista के विभिन्न संस्करणों जो BitLocker सुविधा का समर्थन नहीं करता, जैसा कि KB935509 की आवश्यकता नहीं है स्थापित करने के लिए प्रभावित नहीं होगा. APC APC also listed several workarounds that dual-boot system users can do to avoid such problems: यह भी कहा कि दोहरी बूट प्रणाली उपयोगकर्ताओं को ऐसी समस्याओं से बचने के लिए कर सकते हैं कई workarounds सूचीबद्ध:
- If the Linux and Vista partitions are installed on the same hard drive,restore the Vista MBR, either using the Vista recovery DVD or using the MBR reinstall feature contained within EasyBCD, before installing SP1. अगर Linux और Vista partitions उसी हार्ड ड्राइव पर, Vista MBR बहाल, या तो Vista वसूली डीवीडी या MBR reinstall सुविधा EasyBCD के भीतर निहित का उपयोग कर का उपयोग करते हुए, SP1 स्थापित करने से पहले स्थापित कर रहे हैं.
- If the operating systems are on different hard drives, simply change the drive boot order in the BIOS to point to the disk containing Vista first, thus bypassing the Linux bootloader on the primary disk. यदि आपरेटिंग सिस्टम अलग हार्ड ड्राइव पर हैं, केवल डिस्क Vista पहले से युक्त करने के लिए बात करने के लिए, इस प्रकार प्राथमिक डिस्क पर लिनक्स bootloader bypassing the BIOS में ड्राइव बूट क्रम बदलते हैं.
- The best choice of course, is to install Linux to dualboot with Windows Vista only after installing SP1. पाठ्यक्रम का सबसे अच्छा विकल्प, Windows Vista के साथ dualboot करने के लिए Linux को स्थापित करने के लिए केवल SP1 स्थापित करने के बाद है.
IMPORTANT : You're reading a machine translated page which is provided "as is" without warranty. महत्वपूर्ण: तुम एक यंत्र के रूप में "वारंटी के बिना होता है, जो" प्रदान की जाती है पृष्ठ अनुवाद पढ़ रहे हैं. Unlike human translation, machine translation does not understand the grammar, semantics, syntax, idioms of natural language, thus often produce inaccurate and low quality text which is misleading and incomprehensible. मानव अनुवाद के विपरीत, मशीन अनुवाद, जिससे अक्सर गलत और निम्न गुणवत्ता पाठ जो गुमराह कर रहे हैं और समझ से बाहर उपज का व्याकरण, अर्थ विज्ञान, वाक्यविन्यास, प्राकृतिक भाषा के मुहावरे को समझ नहीं है. Thus, please refer to इस प्रकार, कृपया देखें original English article मूल अंग्रेजी लेख when in doubt. जब संदेह में है.
Related Articles संबंधित लेख
- System Halt 0xc0000034 Error When Boot Up After Installing Windows Vista SP1 सिस्टम रुक जाओ 0xc0000034 त्रुटि जब बूट ऊपर स्थापित Windows Vista SP1 के बाद
- Fix Deleted SAM File Causing Windows Vista Unable to Boot Error फिक्स नष्ट कर दिया गया सैम फाइल हो सकता है Windows Vista बूट त्रुटि करने में असमर्थ
- Windows Vista Fails to Boot After Installing SP1 with ntoskrnl.exe 0xc0000098 Error Windows Vista बूट करने के लिए स्थापित SP1 ntoskrnl.exe 0xc0000098 त्रुटि के साथ के बाद विफल
- Windows Vista Startup Hang and Boot Failure after SP1 on Corrupt Driver File (atapi.sys and ataport.sys) Windows Vista Startup रुको और बूट विफलता SP1 भ्रष्ट चालक संचिका पर जाने के बाद (Atapi.sys और ataport.sys)
- Windows Vista SP1 To Force Install on Windows Update as 'Critical' from April 18 Windows Vista SP1 स्थापित करने के लिए सेना Windows अद्यतन के रूप में '' 18 अप्रैल से गंभीर
- Error Code 0×80070002 During Windows Vista SP1 Setup Install त्रुटि कोड 0 × 80070002 के दौरान Windows Vista SP1 सेटअप स्थापित करें
- How to Install and Use Windows Vista Ultimate Extras Sound Schemes (Pearl and Glass) in XP कैसे स्थापित करें और उपयोग Windows Vista Ultimate अतिरिक्त ध्वनि योजनाओं (पर्ल और ग्लास) XP में
- How to Install MUI Language Files in Windows Vista कैसे स्थापित MUI भाषा फ़ाइलें करने के लिए Windows Vista में
- Download BootTimer to Monitor BIOS Boot Up Time in Windows System डाउनलोड BootTimer मॉनिटर BIOS बूट करने के लिए समय ऊपर विंडोज सिस्टम में
- How to Install and Enable Tablet PC Optional Components in Windows Vista कैसे स्थापित करें और सक्षम Tablet पीसी वैकल्पिक Components करने के लिए Windows Vista में










































September 22nd, 2008 09:32 22 सितंबर, 2008 09:32
Hi Mike! हाय माइक!
Can you teach me how to dual-boot windows(inspirat2) and linux ubuntu v5.1(something). तुम मुझे सिखा सकते कैसे दोहरा बूट विंडो (inspirat2) और Linux ubuntu v5.1 (कुछ) के लिए.
It cannot be setup in the Windows OS.. यह विंडोज़ ओएस में सेटअप .. नहीं किया जा सकता है so i did was I boot the Linux CD.. इसलिए मुझे लगता है मैं बूट था कि Linux सीडी .. then after that, it makes you choose: type: “server”; then the other one is press enter to install. फिर उसके बाद, वह तुम चुनें: प्रकार करता है: "सर्वर", तो दूसरे एक प्रेस स्थापित करने के लिए जानकारी दर्ज करें.
The prob is, how to partition the drive. इस prob है, कैसे ड्राइव विभाजन के लिए. I have only one HDD(40 Gb) then, I partitioned it by: 2gb (FREE), मैं (40 GB) फिर, मैं ने यह विभाजित: 2gb (फ्री), केवल एक HDD है
19gb for storage, 19gb for my WinXP(Inspirat2) then excess 8mb. 19gb भंडारण के लिए, 19gb मेरी WinXP (Inspirat2 के लिए), तो अतिरिक्त 8mb.
I'd made a 2gb partition because I planned to use it for Linux OS.. क्योंकि मैं लिनक्स ओएस .. के लिए इसका इस्तेमाल करने की योजना बनाई मैं एक 2gb विभाजन बनाया था but I dont know how to partition it using linux ubuntu v5.1… लेकिन मैं यह कैसे linux ubuntu v5.1 विभाजन का उपयोग करने के लिए नहीं जानता ...
September 22nd, 2008 09:27 22 सितंबर, 2008 09:27
Hi Mike! हाय माइक!
Can you teach me how to dual-boot windows(inspirat2) and linux ubuntu v5.1(something). तुम मुझे सिखा सकते कैसे दोहरा बूट विंडो (inspirat2) और Linux ubuntu v5.1 (कुछ) के लिए.
It cannot be setup in the Windows OS.. यह विंडोज़ ओएस में सेटअप .. नहीं किया जा सकता है so i did was I boot the Linux CD.. इसलिए मुझे लगता है मैं बूट था कि Linux सीडी .. then after that, it makes you choose: type: “server”; then the other one is press enter to install. फिर उसके बाद, वह तुम चुनें: प्रकार करता है: "सर्वर", तो दूसरे एक प्रेस स्थापित करने के लिए जानकारी दर्ज करें.
The prob is, how to partition the drive. इस prob है, कैसे ड्राइव विभाजन के लिए. I have only one HDD(40 Gb) then, I partitioned it to मैं (40 GB) तो केवल एक HDD है, मैं इसे विभाजित
April 15th, 2008 16:04 अप्रैल, 15 2008 16:04
So im running Ubuntu and Vista on my Laptop, and after the upgrade, it wiped my GRUB so I couldnt boot into Ubuntu, the fix: तो मेरा लैपटॉप पर, और Ubuntu और Vista चलाने im को अपग्रेड करने के बाद, यह Ubuntu है, में मैं ठीक कर सके बूट मेरे GRUB नष्ट:
Get your live cd out, and boot into it. आपके, बाहर सीडी रह जाओ और बूट में. Open up the terminal and type: इस टर्मिनल खोलें और प्रकार अप:
sudo grub
root (hd0,0)
setup (hd0)
Then you should be able to see the boot loader the next time you boot from the hard disk. तो फिर तुम बूट अगली बार की हार्ड डिस्क से बूट लोडर को देखने के लिए सक्षम होना चाहिए.
another problem i ran into was that the install messed up my partitions and my menu.lst file had the wrong partitions to boot to… एक और समस्या में है कि मैं और मेरी partitions गड़बड़ स्थापित मेरी menu.lst फाइल को बूट करने के लिए गलत partitions था भाग गया ...
sudo gedit /boot/grub/menu.lst
April 15th, 2008 10:16 अप्रैल, 15 2008 10:16
Did you install Vista SP1 before or after Ubuntu? तुम से पहले या Ubuntu के बाद Vista SP1 स्थापित किया था? Or you're using integrated Vista SP1? या तुम Vista SP1 एकीकृत का प्रयोग कर रहे हैं?
April 15th, 2008 09:55 अप्रैल, 15 2008 09:55
I've been running vista sp1 / ubuntu for months now. मैं विस्टा SP1 चल रहा था / ubuntu महीनों के लिए अब. It works just fine. यह सिर्फ अच्छा काम करता है.