Windows Mobile Device Cannot Connect (or Quickly Disconnect or Drop) and Not Sync with Vista WMDC (ActiveSync) Windows Mobile設備無法連接(或快速斷開或降) ,而不是與Vista同步WMDC ( ActiveSync的)
Whenever user connect a Windows Mobile device to Windows Vista Windows Mobile Device Center (WMDC) via a USB cable, WMDC fails to connect to the Pocket PC (PPC) Phone device, causing synchronization not start or fail.每當用戶連接Windows移動設備到Windows Vista的Windows Mobile設備中心( WMDC )通過USB線, WMDC沒有連接到掌上電腦付費( PPC )電話設備,造成同步無法啟動或失敗。 Sometimes, WMDC may tries to connect to mobile device with “Connecting” message for a while, but eventually fails with “Disconnected” message.有時候, WMDC可能嘗試連接到移動設備的“連接”的訊息了一段時間,但最終失敗, “斷開”的消息。 In some worse case, Windows Vista doesn’t detect any Windows Mobile device been connected, and no response or connect attempt action in WMDC.在一些嚴重情況下, Windows Vista沒有檢測到任何Windows移動設備被連接,也沒有答复或連接企圖行動WMDC 。
In Device Manager, Windows Mobile-based device driver under Portable Devices and Microsoft Mobile Device Remote Adapter local area network connection under Network Adapters appear briefly before missing or disappearing again.在設備管理器中,基於Windows Mobile的設備驅動下的便攜式設備和微軟移動設備的遠程適配器局域網連接網絡適配器下出現短暫前遺失或消失了。 Any connection established is terminated, dropped, disconnected, vanished and disappeared within a few seconds.任何連接建立終止的情況下,下跌,中斷,消失了,消失在幾秒鐘內。 When the connection is not established, user cannot or unable to sync the PC with desktop, and can’t install applications or transfer files.當連接是沒有建立,用戶無法或不能同步電腦與台式電腦,不能安裝應用程序或轉讓檔案。 Soft reset or hard reset the device also does not help to perfectly fix the problem.軟復位或硬重置設備也無助於完美的解決這一問題。
Microsoft微軟 publishes出版 several troubleshooting tips to fix device unable to connec issue.一些解決疑難問題的竅門修復設備無法連接的問題。 One of the cause appears to be Windows Live OneCare that blocks the device connectivity.其中的原因似乎是的Windows Live OneCare這一區塊的裝置連接。 To allow the device to connect via Windows Live OneCare, enable (check) the ActiveSync/Windows Mobile Device Center – synchronize my mobile devices with my computer rule in Firewall Connection Tool button (Firewall tab) of Windows Live OneCare settings.為了讓設備通過連接的Windows Live OneCare ,使(選中) ActiveSync的/ Windows Mobile設備中心-我的同步移動設備與我的電腦防火牆規則的連接工具按鈕(防火牆標籤)的W indowsL iveO neCare產品設置。 Also in Firewall Tab, click on Advanced button and go to Ports and Protocols tab.另外,在防火牆選項卡,點擊高級按鈕 ,然後轉到端口和協議選項卡。 Add and create a port called Windows Mobile Device Center with TCP Port Range as 5721 , For Connections dropdown as Inbound [local ports] and Scope is set to Local network (subnet) .購買並創建一個港口所謂Windows Mobile設備中心與TCP端口範圍為5721 ,連接下拉作為輸入[地方港口]和範圍設置為本地網絡(子網) 。
Other possible cause in failure to connect to WMDC is due to driver installation may not have completed successfully.其他可能原因未能連接到WMDC是由於驅動程序的安裝可能無法順利完成。 If you think this may be the case, follow these steps:如果您認為這可能是這種情況,按照下列步驟進行:
- Keep the WM device connected.保持西醫結合裝置連接。
- Go to Start > Start Search.轉到開始“ >開始搜索。
- Enter Device Manager or devmgmt.msc to launch the Device Manager window.輸入裝置管理員或devmgmt.msc發射設備管理器窗口。
- Look under the Network adapters node for Microsoft Windows Mobile Remote Adapter .根據查找網絡適配器節點微軟Windows Mobile遠程適配器。 If this is not present, skip to step 5.如果這是不存在,請跳到步驟5 。 Otherwise, right-click Microsoft Windows Mobile Remote Adapter and choose to Uninstall .否則,右擊微軟Windows Mobile遙控器 ,並選擇卸載。
- Look under the Mobile Devices node for Microsoft USB Sync .期待下移動設備節點微軟的USB同步 。 If this is not present, skip to step 6.如果這是不存在,跳到步驟6 。 Otherwise, right-click Microsoft USB Sync and choose to Uninstall .否則,右擊微軟的USB同步 ,並選擇卸載。
- Disconnect and reconnect the WM device.斷開和重新西醫結合裝置。 The device driver for the PPC Phone will re-install and Windows Mobile Device Center will launch.該設備驅動程序的PPC Phone將重新安裝和Windows Mobile設備中心將推出。
If Microsoft resolution doesn’t help, try to disable the Advanced Network Functionality mode on the Windows Mobile device from the USB to PC icon in Connections of Start Menu Settings .如果微軟決議沒有幫助,嘗試禁用先進的網絡功能模式的Windows Mobile設備的USB接口與PC機連接圖標的啟動菜單設置。 After turning off Advanced Network Functionality, the device will be connected via a USB Serial driver, the sync will be done via native Smartphone USB Sync device driver and no LAN network connection is made.後關閉高級網絡功能,該設備將連接通過USB串行驅動器,同步工作將通過本地智能手機的USB設備驅動程序同步,沒有局域網連接。
However, the most likely and most possible resolution for dropped connection and not connected problem for Windows Mobile Device Center is related to Windows Media Player process.然而,最有可能和最有可能下降的決議連接和未連接問題的Windows Mobile設備中心與Windows媒體播放器的過程。 On connection with a Windows Mobile device, system will launch wmplayer.exe process, even though Windows Media Player is not ran or opened, and user is not syncing any music, song or media files at internal memory storage or SD memory card.對涉嫌與Windows Mobile設備,系統將推出wmplayer.exe進程,即使Windows媒體播放器是不是跑或開了,用戶不同步的任何音樂,歌曲或媒體文件的內部存儲或SD記憶卡。
The wmplayer.exe process for unknown reason will terminate the connection, according to experience of a few users.該wmplayer.exe進程將不明原因終止方面,根據經驗,少數用戶。 As wmplayer.exe process won’t terminate itself, user have to end and kill the process as fast as possible once the Pocket PC device is connected to computer and wmplayer.exe process service is launched.作為wmplayer.exe進程將不會終止本身,用戶已經結束並殺死進程盡快一旦Pocket PC設備連接到電腦和wmplayer.exe進程服務的推出。
To manually terminate the wmplayer.exe, right click on Windows Taskbar and click on Task Manager .要手動終止wmplayer.exe ,右擊Windows任務欄 ,然後點擊任務管理器。 Then click on Image Name to sort the list of processes according to name alphabetically.然後點擊圖片名稱排序清單的程序按照名稱。 Locate and highlight wmplayer.exe near the bottom of the list, and click on End Process button.找到並突出wmplayer.exe底部附近的名單,然後點擊結束進程按鈕。 After a while, the device will install with correct driver, connect and WMDC will sync.過了一段時間,該裝置將安裝在正確的驅動程序,連接和WMDC將同步。 If the device still doesn’t connect and sync, try to disconnect and reconnect the device again, and kill off any wmplayer.exe service that run after connecting as soon as possible.如果該設備仍無法連接和同步,嘗試拔掉再重新裝置了,扼殺任何wmplayer.exe服務,連接運行後盡快。
If system is not responding to or takes no action to detect, install connect any plugged in Windows Mobile device (and of course WMDC no sync action too), it may be causing by existing wmplayer.exe already existed, blocking future sync process.如果系統沒有響應或採取任何行動來檢測,安裝連接任何插入Windows Mobile設備(當然WMDC沒有同步行動太) ,它可能會造成現有的wmplayer.exe已經存在,阻礙未來同步的過程。 To fix the issue, open Task Manager ( taskmgr in Start Search), and search for any wmplayer.exe service that is running, and kill or end all these processes.為了解決問題,打開任務管理器 ( taskmgr在開始搜索) ,並尋找任何wmplayer.exe服務正在運行,並殺死或停止所有這些進程。 Re-connect the Windows Mobile device, and Windows Mobile Device Center should connect and sync properly.重新連接的Windows Mobile設備,和Windows Mobile設備中心應連接和同步正確。
IMPORTANT : You're reading a machine translated page which is provided "as is" without warranty. 重要:您正在閱讀的機器翻譯網頁這是“原樣”提供,無保修。 Unlike human translation, machine translation does not understand the grammar, semantics, syntax, idioms of natural language, thus often produce inaccurate and low quality text which is misleading and incomprehensible.不同人的翻譯,機器翻譯不明白的語法,語義,句法,成語自然語言,因此,往往產生不準確,低質量的文字這是誤導和費解。 Thus, please refer to因此,請參閱 original English article英文原文的文章 when in doubt.當懷疑。
Related Articles相關文章
- Flash Upgrade Eten Glofiish Windows Mobile Device ROM Firmware OS from SD Memory Card (Fix RAPIcopyfile or Update Error in Vista)閃存升級埃滕Glofiish Windows Mobile設備的固件操作系統光盤從SD記憶卡(修正RAPIcopyfile或更新錯誤在Vista )
- Update or Upgrade to Zune 2.5 for Much Wanted Features (Direct Download Link)更新或升級到Zune播放器2.5很想特點(直接下載鏈接)
- Download Microsoft Windows Live for Windows Mobile (G2) WM6 Device下載微軟的Windows Live的Windows移動( G2 ) WM6裝置
- Download Google Search Box to Enable Fast Searching in Windows Mobile Device下載谷歌搜索框,使快速搜索在Windows移動設備
- Download Softick Card Export II Trial to Emulate Windows Mobile as Portable Hard Disk下載Softick卡出口二審判效仿的Windows Mobile的便攜式硬盤
- Download WeFi Beta 1.33 Version for Windows Mobile Device to Find Hot Spots and Connected Anywhere下載WeFi測試1.33版本的Windows移動設備尋找熱點和接入網絡
- Sync Mac OS X Leopard Address Book with Google Gmail Contacts同步的Mac OS X Leopard的地址簿與谷歌的Gmail聯繫人
- Windows Vista Cannot Auto Find Driver for New USB Device Plugged In Windows Vista無法自動找到新的驅動程序的USB設備插入
- Unable to Open Device Manager on Tasks Pane of Computer Properties in Windows Vista無法打開設備管理器的任務窗格中的計算機性能在Windows Vista
- Sharp Willcom D4 WSO16SH First Smallest Vista-based UMPC Powered by Intel Atom夏普Willcom的D4 WSO16SH第一最小的Vista的超便攜移動個人電腦採用了英特爾原子

































August 29th, 2008 06:12 2008年8月29日6時12分
Disabling Advanced Network Functionality worked to connect my Samsung i760 to Vista.禁用先進的網絡功能連接的工作我的三星i760到Vista 。 Now I’m all synched up and ROCKIN again!現在我所有的同步和搖滾了!
September 16th, 2008 03:49 2008年九月16日三時49分
Nothing works for me, I’ve given up trying to make it work on Vista x64.任何作品對我來說,我已經放棄,使其工作在Vista x64系統上來。
I’ll go back to XP.我會回到XP中。
Thanks for nothing MS.感謝沒有確證。
October 15th, 2008 22:16 08年10月十五日22:16
thanks (Y)感謝( Y )的
October 30th, 2008 19:07 2008年十月30日19:07
disable the Advanced Network Functionality mode on the Windows Mobile device from the USB to PC icon in Connections of Start Menu Settings.
this worked for my omnia many thanks這個工作我OMNIA公司許多感謝
November 1st, 2008 11:24 08年11月1號11:24
Holy crap!羅馬廢話! I’ve had problems connecting my WM device for nearly two years, and I finally came across this blog.我有我的問題,連接裝置西醫結合近兩年來,我終於在此博客。 Disabling Advanced Network Functionality fixed the problem!禁用先進的網絡功能解決了這一問題! THANK YOU!謝謝您!
November 5th, 2008 01:44 08年11月5日01:44
That points into the right direction: if the Storage card was seen by the Host before, vista tries to start it as a Media Device.這點到正確的方向:如果存儲卡被看作由主機之前, Vista的嘗試啟動它作為媒體設備。 Disable Autoplay or set Mobile devices to “Ask for Action” will solve the Problem.禁用自動播放或設置移動設備的“賣出”行動將解決這個問題。
November 5th, 2008 01:49 08年11月5日1時49分
… and uncheck “sync this device automatically” in “set up syn” in wmplayer !!!! ...並取消“同步此裝置會自動”中的“設置同步”的wmplayer ! !