Windows Mobile Device Cannot Connect (or Quickly Disconnect or Drop) and Not Sync with Vista WMDC (ActiveSync) O Windows Mobile Device não consegue se conectar (ou Desligar Rapidamente ou Drop) e Nem Sync com Vista WMDC (ActiveSync)

Whenever user connect a Windows Mobile device to Windows Vista Windows Mobile Device Center (WMDC) via a USB cable, WMDC fails to connect to the Pocket PC (PPC) Phone device, causing synchronization not start or fail. Quando usuário conectar um dispositivo Windows Mobile para o Windows Vista O Windows Mobile Device Center (WMDC) através de um cabo USB, WMDC não consegue ligar ao Pocket PC (PPC) Telefone dispositivo, causando sincronização não iniciar ou falhe. Sometimes, WMDC may tries to connect to mobile device with “Connecting” message for a while, but eventually fails with “Disconnected” message. Às vezes, WMDC maio tenta se conectar ao dispositivo móvel com o "Conexão" é exibida por um tempo, mas eventualmente falhar com "Desligado" mensagem. In some worse case, Windows Vista doesn’t detect any Windows Mobile device been connected, and no response or connect attempt action in WMDC. No pior caso algum, o Windows Vista não detectar qualquer dispositivo Windows Mobile sido ligado, e nenhuma resposta ou ligue tentativa WMDC em ação.

In Device Manager, Windows Mobile-based device driver under Portable Devices and Microsoft Mobile Device Remote Adapter local area network connection under Network Adapters appear briefly before missing or disappearing again. No Gestor de dispositivos, o Windows Mobile-driver de dispositivo baseado em dispositivos portáteis e Microsoft Mobile Device Adaptador remota a ligação em rede de área local adaptadores de rede aparecer brevemente antes ausente ou desaparecer novamente. Any connection established is terminated, dropped, disconnected, vanished and disappeared within a few seconds. Qualquer conexão é estabelecida, encerrado, abandonado, desconexas, desaparecidos e desapareceu dentro de alguns segundos. When the connection is not established, user cannot or unable to sync the PC with desktop, and can’t install applications or transfer files. Quando a ligação não for estabelecida, o usuário pode ou não à sync incapaz com o PC desktop, e não pode instalar aplicações ou transferir arquivos. Soft reset or hard reset the device also does not help to perfectly fix the problem. Soft ou hard reset redefinir o dispositivo também não ajuda a resolver o problema perfeitamente.

Microsoft publishes publica several troubleshooting tips to fix device unable to connec issue. várias sugestões para corrigir dispositivo incapaz de ligação questão. One of the cause appears to be Windows Live OneCare that blocks the device connectivity. Uma das causas parece ser o Windows Live OneCare dispositivo que bloqueia a conectividade. To allow the device to connect via Windows Live OneCare, enable (check) the ActiveSync/Windows Mobile Device Center – synchronize my mobile devices with my computer rule in Firewall Connection Tool button (Firewall tab) of Windows Live OneCare settings. Para permitir que o dispositivo se conectar via Windows Live OneCare, habilitar (check), o ActiveSync / Windows Mobile Device Center - sincronizar meu celular com o meu computador, em regra botão Tool Connection Firewall (Firewall guia) do Windows Live OneCare configurações. Also in Firewall Tab, click on Advanced button and go to Ports and Protocols tab. Também em Firewall Tab, clique no botão Avançado e vá para a guia Portas e protocolos. Add and create a port called Windows Mobile Device Center with TCP Port Range as 5721 , For Connections dropdown as Inbound [local ports] and Scope is set to Local network (subnet) . Adicionar e crie um porto chamado Windows Mobile Device Center com a porta TCP 5721 como Range, como dropdown Para Conexões Inbound [portas locais] Âmbito e está definido para rede local (sub-rede).

Other possible cause in failure to connect to WMDC is due to driver installation may not have completed successfully. Outras possíveis causas do fracasso para se conectar a WMDC é devido ao driver instalação pode não ter sido concluída com êxito. If you think this may be the case, follow these steps: Se você acha que isso pode ser o caso, siga estas etapas:

  1. Keep the WM device connected. Keep WM o dispositivo conectado.
  2. Go to Start > Start Search. Vá até Iniciar> Iniciar pesquisa.
  3. Enter Device Manager or devmgmt.msc to launch the Device Manager window. Digite devmgmt.msc Gerenciador de Dispositivos ou para lançar a janela do Gerenciador de Dispositivos.
  4. Look under the Network adapters node for Microsoft Windows Mobile Remote Adapter . Olhe sob o nó para adaptadores de rede Microsoft Windows Mobile Remote Adapter. If this is not present, skip to step 5. Se este não estiver presente, avance para o passo 5. Otherwise, right-click Microsoft Windows Mobile Remote Adapter and choose to Uninstall . Caso contrário, clique com o botão direito do Microsoft Windows Mobile Adaptador remoto e escolher a desinstalação.
  5. Look under the Mobile Devices node for Microsoft USB Sync . Olhe sob a Dispositivos Móveispara o Microsoft USB Sync. If this is not present, skip to step 6. Se este não estiver presente, avance para o passo 6. Otherwise, right-click Microsoft USB Sync and choose to Uninstall . Caso contrário, clique com o botão direito e selecione Microsoft USB Sync para desinstalar.
  6. Disconnect and reconnect the WM device. Desligar e voltar a WM dispositivo. The device driver for the PPC Phone will re-install and Windows Mobile Device Center will launch. O driver de dispositivo para o telefone PPC irá re-instalar o Windows Mobile Device Center e vai lançar.

If Microsoft resolution doesn’t help, try to disable the Advanced Network Functionality mode on the Windows Mobile device from the USB to PC icon in Connections of Start Menu Settings . Se a Microsoft resolução não ajudar, tente desativar o Modo de Funcionalidade de rede avançadas sobre o Windows Mobile a partir do dispositivo USB para PC no ícone Conexões de Menu Iniciar Configurações. After turning off Advanced Network Functionality, the device will be connected via a USB Serial driver, the sync will be done via native Smartphone USB Sync device driver and no LAN network connection is made. Após a desativação de funcionalidade avançada de rede, o dispositivo será ligado por um driver USB Serial, o sincronismo será feito via nativas Smartphone driver de dispositivo USB Sync e nenhuma conexão de rede LAN é feita.

However, the most likely and most possible resolution for dropped connection and not connected problem for Windows Mobile Device Center is related to Windows Media Player process. No entanto, o mais provável e mais possível resolução para a ligação caiu e não ligada problema para o Windows Mobile Device Center está relacionado com o Windows Media Player processo. On connection with a Windows Mobile device, system will launch wmplayer.exe process, even though Windows Media Player is not ran or opened, and user is not syncing any music, song or media files at internal memory storage or SD memory card. Em conexão com um dispositivo Windows Mobile, sistema lançará Wmplayer.exe processo, apesar de o Windows Media Player não é corri ou aberto, e não é usuário sincronização qualquer música, música ou arquivos de mídia de armazenamento de memória interna ou cartão de memória SD.

The wmplayer.exe process for unknown reason will terminate the connection, according to experience of a few users. O processo de Wmplayer.exe motivo desconhecido irá encerrar a ligação, de acordo com a experiência de alguns usuários. As wmplayer.exe process won’t terminate itself, user have to end and kill the process as fast as possible once the Pocket PC device is connected to computer and wmplayer.exe process service is launched. Como Wmplayer.exe processo não vai terminar em si, o utilizador tem de terminar e de matem o processo o mais depressa possível, uma vez que o dispositivo Pocket PC está conectado ao computador eo processo Wmplayer.exe serviço for lançado.

To manually terminate the wmplayer.exe, right click on Windows Taskbar and click on Task Manager . Para encerrar manualmente o Wmplayer.exe, clique direito no Windows Barra de tarefas e clique em Gerenciador de Tarefas. Then click on Image Name to sort the list of processes according to name alphabetically. Em seguida, clique em Nome da imagem para classificar a lista de processos por nome em ordem alfabética. Locate and highlight wmplayer.exe near the bottom of the list, and click on End Process button. Localize e realce Wmplayer.exe perto da parte inferior da lista, e clique no botão Finalizar processo. After a while, the device will install with correct driver, connect and WMDC will sync. Depois de um tempo, o dispositivo vai ser instalado com o driver correto, ligue e vai WMDC sincronia. If the device still doesn’t connect and sync, try to disconnect and reconnect the device again, and kill off any wmplayer.exe service that run after connecting as soon as possible. Se o dispositivo continuar a não ligar e sincronia, tente desconectar e reconectar o dispositivo novamente, e aniquilar qualquer Wmplayer.exe serviços que são executados depois de ligar o mais rapidamente possível.

If system is not responding to or takes no action to detect, install connect any plugged in Windows Mobile device (and of course WMDC no sync action too), it may be causing by existing wmplayer.exe already existed, blocking future sync process. Se sistema não está a responder a, ou tomar qualquer acção para detectar, instalar conectar qualquer dispositivo conectado no Windows Mobile (e de rumo WMDC nenhuma sincronia acção demasiado), ela pode estar causando por Wmplayer.exe existia já existente, bloqueando o futuro processo de sincronia. To fix the issue, open Task Manager ( taskmgr in Start Search), and search for any wmplayer.exe service that is running, and kill or end all these processes. Para corrigir o problema, abra o Gerenciador de tarefas (taskmgr em Iniciar Pesquisa), e procurar qualquer Wmplayer.exe serviço que está sendo executado, ou terminar e matar todos esses processos. Re-connect the Windows Mobile device, and Windows Mobile Device Center should connect and sync properly. Volte a ligar o dispositivo Windows Mobile e Windows Mobile Device Center deverá sync e conectar corretamente.

IMPORTANT : You're reading a machine translated page which is provided "as is" without warranty. IMPORTANTE: Você está lendo uma máquina página traduzida que é fornecido "como está" sem garantia. Unlike human translation, machine translation does not understand the grammar, semantics, syntax, idioms of natural language, thus often produce inaccurate and low quality text which is misleading and incomprehensible. Diferentemente tradução humana, tradução automática não compreender a gramática, semântica, sintaxe, expressões idiomáticas da língua natural, assim, muitas vezes produzir texto impreciso e baixa qualidade que é enganosa e incompreensível. Thus, please refer to Assim, por favor consulte a original English article artigo original Inglês when in doubt. quando em dúvida.



7 Responses to “Windows Mobile Device Cannot Connect (or Quickly Disconnect or Drop) and Not Sync with Vista WMDC (ActiveSync)” 7 Responses to "Windows Mobile Device não consegue se conectar (ou Desligar Rapidamente ou Drop) e Nem Sync com Vista WMDC (ActiveSync)"

  1. R Tucker R Tucker
    August 29th, 2008 06:12 29 de agosto de 2008 06:12
    1

    Disabling Advanced Network Functionality worked to connect my Samsung i760 to Vista. A desativação funcionalidade avançada de rede para ligar o meu Samsung trabalhou para I760 Vista. Now I’m all synched up and ROCKIN again! Agora eu sou tudo para cima e sincronizada Rockin novamente!

  2. Annoyed Irritado
    September 16th, 2008 03:49 16 de setembro de 2008 03:49
    2

    Nothing works for me, I’ve given up trying to make it work on Vista x64. Nada funciona para mim, eu tenha desistido tentando fazê-la funcionar no Vista x64.

    I’ll go back to XP. Eu vou voltar ao XP.
    Thanks for nothing MS. Obrigado por nada MS.

  3. sousou` fashionita »
    October 15th, 2008 22:16 15 de outubro de 2008 22:16
    3

    thanks (Y) agradecimentos (Y)

  4. Matt
    October 30th, 2008 19:07 Oct 30, 2008 19:07
    4

    disable the Advanced Network Functionality mode on the Windows Mobile device from the USB to PC icon in Connections of Start Menu Settings. desativar o modo de funcionalidade avançada de rede sobre o dispositivo Windows Mobile a partir do USB para PC no ícone Conexões de Menu Iniciar Configurações.

    this worked for my omnia many thanks este trabalhou para o meu muito obrigado omnia

  5. Mike Parker Mike Parker
    November 1st, 2008 11:24 1 de novembro de 2008 11:24
    5

    Holy crap! Macacos me mordam! I’ve had problems connecting my WM device for nearly two years, and I finally came across this blog. Tive problemas para conectar o meu dispositivo WM há quase dois anos, e finalmente eu vim através deste blog. Disabling Advanced Network Functionality fixed the problem! A desativação funcionalidade avançada de rede fixa o problema! THANK YOU! OBRIGADO!

  6. Karsten
    November 5th, 2008 01:44 5 de novembro de 2008 01:44
    6

    That points into the right direction: if the Storage card was seen by the Host before, vista tries to start it as a Media Device. Que aponta no bom sentido: se o cartão de armazenamento foi visto pelo anfitrião, antes, Vista tenta iniciá-lo como uma Media Device. Disable Autoplay or set Mobile devices to “Ask for Action” will solve the Problem. Desabilite Autoplay ou conjunto de dispositivos móveis "Peça de Acção" irão resolver o problema.

  7. karsten Karsten
    November 5th, 2008 01:49 5 de novembro de 2008 01:49
    7

    … and uncheck “sync this device automatically” in “set up syn” in wmplayer !!!! ... E desmarque "sincronia este dispositivo automaticamente" em "criar syn", em WMPLAYER!!

Leave a Reply Deixe uma Resposta

You can use these tags: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <strike> <strong> Você pode usar estas tags: <a href="" title="Avião"> <abbr title="Avião"> <acronym title="Avião"> <b> <blockquote cite=""> <cite> <code> <del datetime = ""> <em> <i> <q Cite=""> <strike> <strong>

Subscribe without commenting Subscrever sem comentar


Custom Search

Incoming Search Terms for the Article Incoming Pesquisa Termos para o artigo

Windows Mobile-based USB device is plugged in but is unable to make a network connection to the desktop. Baseado em Windows Mobile dispositivo USB é ligado à corrente, mas é incapaz de fazer uma conexão de rede para o ambiente de trabalho. - -- activesync cannot connect to the windows mobile powered device ActiveSync não pode se conectar ao dispositivo Windows Mobile powered - -- windows mobile device center won't connect janelas dispositivo móvel center não vai ligar - -- Microsoft Windows Mobile Remote Adapter Microsoft Windows Mobile remoto adaptador - -- ASUS P320 hard reset ASUS P320 hard reset - -- windows mobile device center not connecting janelas dispositivo móvel center não liga - -- windows mobile remote adapter janelas móveis remoto adaptador - -- p320 hard reset p320 hard reset - -- Windows mobile device center not connected Windows dispositivo móvel conectado center não - -- windows mobile does not connect janelas móveis não conecta - -- Windows Mobile-based USB device is plugged in but is unable to make a network connection to the desktop Baseado em Windows Mobile dispositivo USB é ligado à corrente, mas é incapaz de fazer uma conexão de rede para o ambiente de trabalho - -- windows mobile device center "not connected" janelas dispositivo móvel center "não ligado" - -- windows mobile device not connecting janelas dispositivo móvel não liga - -- windows mobile cannot connect janelas móveis não podem se conectar - -- asus windows mobile device driver asus janelas do driver de dispositivo móvel - -- windows mobile device center cannot connect janelas dispositivo móvel center não pode se conectar - -- Windows Mobile won't connect O Windows Mobile não irá ligar - -- windows mobile device center not syncing janelas dispositivo móvel center não sincronização - -- activesync cannot connect to the windows mobile ActiveSync não pode se conectar ao Windows Mobile - -- cannot connect to windows mobile device center não pode se conectar ao dispositivo móvel janelas do centro - -- "Windows Mobile-based USB device is plugged in but is unable to make a network connection to the desktop." "Baseado em Windows Mobile dispositivo USB é ligado à corrente, mas é incapaz de fazer uma conexão de rede para o ambiente de trabalho." - -- mobile device center won't connect dispositivo móvel center não vai ligar - -- windows mobile device center disconnects janelas dispositivo móvel central desconectará - -- windows mobile device center doesn't connect janelas dispositivo móvel central não ligar - -- "Windows Mobile-based USB device is plugged in but is unable to make a network connection to the desktop" "Baseado em Windows Mobile dispositivo USB é ligado à corrente, mas é incapaz de fazer uma conexão de rede para o ambiente de trabalho" - -- wmdc disconnects wmdc desconecta - -- windows mobile device center disconnect janelas dispositivo móvel center desconectar - -- windows mobile device center does not connect janelas dispositivo móvel central não ligar - -- windows mobile based device code 10 dispositivo baseado no Windows Mobile código 10 - -- windows mobile disconnect janelas móveis desconectar - -- windows mobile-based device driver download janelas móveis baseados em driver de dispositivo download - -- cannot connect windows mobile não é possível conectar o Windows Mobile - -- windows mobile device center disconnected janelas dispositivo móvel center desligado - -- microsoft windows mobile remote adapter code 10 Microsoft Windows Mobile remota de código adaptador 10 - -- windows Mobile-based USB device is plugged in but is unable get a network with the desktop. janelas móveis baseada em dispositivo USB é ligado à corrente, mas é impossível ter uma rede com o ambiente de trabalho. - -- windows mobile cannot connect vista janelas móveis não podem se conectar vista - -- "windows mobile device center" "not connected" "janelas dispositivo móvel center" "Não conectado" - -- windows mobile device center not detecting phone janelas dispositivo móvel center não detectando telefone - -- activesync cannot connect to the windows powered device ActiveSync não pode se conectar ao dispositivo windows powered - -- windows mobile device center wont connect janelas dispositivo móvel centro costuma ligar - -- windows mobile remote adapter driver janelas móveis remoto placa de - -- windows mobile-based device code 10 dispositivo baseado no Windows Mobile código 10 - -- Windows Mobile-based Device Driver Download (.exe OR .zip) Baseado em Windows Mobile Device Driver Download (. Exe ou. Zip) - -- windows mobile not connecting vista janelas móveis não ligam vista - -- "Activesync cannot connect to the Windows Mobile powered device" "ActiveSync não pode se conectar ao dispositivo Windows Mobile powered" - -- microsoft usb sync vista microsoft usb sync vista - -- cannot connect mobile device não pode se conectar dispositivo móvel - -- windows mobile janelas móveis - -- windows mobile device cannot connect janelas dispositivo móvel não pode se conectar - -- microsoft mobile device sync xp sp3 microsoft dispositivo móvel sync XP SP3 - --