ReadyBoost Not Working or USB Flash Key Stick Not Support or Enabled In Windows Vista SP1 USB 플래시 키가 부착되지 아니하거나 근무 지원 ReadyBoost와 또는 윈도우 비스타 SP1에서 활성화
ReadyBoost in 안에는 ReadyBoost Windows Vista 윈도우 비스타 uses a USB flash drive such as USB key or memory stick as additional memory to the operating system to boost system performance. USB 키 또는 USB 플래시 드라이브와 같은 메모리 스틱을 사용하는 시스템 성능을 향상하기 위해 운영 체제에 메모리를 추가했다. However, after installing or upgrading to Windows Vista SP1 (and even in Windows Vista RTM), the ReadyBoost may stop working and no longer functioning, or saying that the USB flash key drive is poor in performance to run ReadyBoost. 그러나 윈도우 비스타 SP1을 설치하거나 업그레이드한 후 (그리고 심지어 윈도우 비스타의 RTM), ReadyBoost와 노력과 더 이상 작동을 중지할 수있습니다 또는 그 이상의 USB 플래시 드라이브 열쇠라고 ReadyBoost와 성능에 가난한를 실행합니다.
The symptom is that when a USB flash drive is inserted and connected, Windows Vista is still able to properly detect the USB flash drive inserted, and gives an option to let user decide whether to run ReadyBoost on the drive. 증상이있을 때 USB 플래시 드라이브를 삽입하고 연결, 윈도우 비스타는 아직 제대로 감지할 수있다 삽입된 USB 플래시 드라이브, 그리고 옵션을 사용자 드라이브에 ReadyBoost와 실행 여부를 결정할 수 있도록 제공됩니다. However, after evaluating the read/write IO speed of the USB flash key, Windows Vista judges that the USB memory stick is not good enough to use as ReadyBoost device, as the poor speed of the drive won’t improve any performance. 그러나, 평가 후 읽기 / USB 플래시 키, 윈도우 비스타는 USB 메모리 스틱을 충분히 판사는 ReadyBoost 장치로 사용하는 것은 좋지 않다, 아이오와 쓰기 속도가 어떤 실적을 개선하지 않을 드라이브의 속도로 가난했다. The unsupported USB Flash storage device include even the premium quality (and priced) faster ReadyBoost approved USB key, and the USB drive can be used and work properly before upgrading to Windows Vista SP1. 지원되지 않는 USB 플래시 저장 장치도 사용할 수 있으며, 윈도우 비스타 SP1로 업그레이 드하기 전에 제대로 작동 프리미엄 품질 (와) 가격은 빠른 USB 키 승인는 ReadyBoost, 그리고 USB 드라이브 등이있다.
The error in speed detection is probably due to USB problem facing Windows Vista SP1, which may have installed efficient USB drivers. 탐지 아마도 윈도우 비스타 SP1의 USB 문제는 효율적인 USB 드라이버가 설치되었을 가능성에 직면 예정이다 속도에서 오류가 발생했습니다. As a workaround, the USB ReadyBoost key not recognized in Windows Vista SP1 (or Windows Vista RTM) issue can be fixed and resolved by tweaking the registry to force Windows Vista to recognize the USB flash drive as a valid ReadyBoost enabled device. 해결책으로, 윈도우 비스타 SP1은 USB ReadyBoost와 키 (또는 윈도우 비스타의 RTM) 문제가 해결될 수있습니다 및 조정하여 Windows Vista는 ReadyBoost와 같은 유효한 USB 플래시 드라이브를 인식하도록하는 장치를 인식하지 레지스트리를 해결합니다.
Firstly, format the USB flash drive to a clean state. 깨끗한 상태로 첫째, 형식은 USB 플래시 드라이브. Then run Registry Editor (regedit), and navigate to the following registry key: 실행한 다음 레지스트리 편집기 (Regedit)를, 그리고 다음 레지스트리 키를로 이동합니다 :
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\EMDMgmt HKEY_LOCAL_MACHINE을 \ 소프트웨어 \ 마이크로 소프트 \은 Windows NT \ CurrentVersion \ EMDMgmt
There are a few branch keys (similar to sub-folders under EMDMgmt) available, which has the format similar to EMDMgmt 아래에있는 유사한 형식 (하위 비슷한에는 몇 가지 열쇠 - 폴더)에 해당하는,
_??_USBSTOR#Disk&Ven_Imation&Prod_Flash_Drive&Rev_1.20#83b27965024423&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}_1453414791 _?? # 디스크 & Ven_Imation & Prod_Flash_Drive & Rev_1.20 # 83b27965024423 & 0 # (53f56307 - b6bf - 11d0 - 94f2 - 00a0c91efb8b) _1453414791 _USBSTOR
Delete all this registry keys (folders) away. 이 레지스트리 키 (폴더)를 떠나 삭제합니다. These registry sub-key values store characteristics and various information or settings about each and every USB mass storage devices connected to the computer, including portable hard disk, external HDD, memory card, USB memory stick and Flash key. 이러한 레지스트리 하위 - 키 값을 저장 특성과 다양한 정보 또는 각과 휴대용 하드 디스크, 외장 하드 디스크를 포함한 모든 컴퓨터에 연결된 USB 대용량 스토리지 디바이스에 대한 설정을 메모리 카드, USB 메모리 및 플래시 열쇠.
After deleting, re-insert the flash memory stick. 삭제 후, 다시 - 플래시 메모리 스틱을 삽입합니다. If Windows Vista still unable to enable ReadyBoost feature on USB key drive that supposedly support Ready Boost, perform the following trick. Windows Vista의 경우에는 아직 USB 키 드라이브 레디 부스트를 지원 가르쳐서는 ReadyBoost 기능을 사용하려면, 다음의 트릭을 수행할 수없습니다.
Re-open Registry Editor if you have closed it, and then navigate to the same registry key again: 다시 - 열려 레지스트리 편집기를 닫으면 그것과 같은 레지스트리 키를 누른 다음 다시 이동 :
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\EMDMgmt HKEY_LOCAL_MACHINE을 \ 소프트웨어 \ 마이크로 소프트 \은 Windows NT \ CurrentVersion \ EMDMgmt
There should be a new registry sub-key created for the USB memory stick just inserted. 그냥 막대기가 삽입된 새 레지스트리 하위 - 핵심은 USB 메모리를 만들 수있다. Go to the new sub-key, and change the following registry values in the right pane to the following settings: 새 하위 -로 이동, 키 및 다음과 같은 설정을 위해 오른쪽 창에서 다음 레지스트리 값을 변경 :
"CacheSizeInMB"=dword:000003c0
"CacheStatus"=dword:00000001
"DeviceStatus"=dword:00000002
If the registry value name is not found, create a new DWORD (32-bit) Value and named it accordingly. 레지스트리 값 이름을 찾을 수 없다면, 새 DWORD (32 - 비트) 값을 생성하고 그에 따라 이름.
Close Registry Editor. 레지스트리 편집기를 닫습. The USB flash key is now recognized as ReadyBoost enabled. 지금은 USB 플래시 열쇠는 ReadyBoost로 인식되고있습니다. Right click on the USB memory stick drive in “Computer” to select “Properties”. 에서 USB 메모리 스틱에 드라이브를 마우스 오른쪽 단추로 "컴퓨터" "을 선택하고 속성을". Then go to the ReadyBoost tab and set the cache size and verify that ReadyBoost is working on the drive. 다음 ReadyBoost와 탭으로 이동하여 캐시 크기를 설정하고 그 ReadyBoost와 드라이브에서 작동되는지 확인합니다.
IMPORTANT : You're reading a machine translated page which is provided "as is" without warranty. 중요 사항 : 당신은 기계로 "보증도없이있는 그대로"제공됩니다 번역된 페이지를 읽고 있군요. Unlike human translation, machine translation does not understand the grammar, semantics, syntax, idioms of natural language, thus often produce inaccurate and low quality text which is misleading and incomprehensible. 인간의 번역과는 달리, 기계 번역, 그래서 종종 부정 확한과 낮은 품질의 텍스트는 오해를 생산하고 이해할 수 문법, 의미론, 문법, 숙어, 자연 언어의 이해가되지 않습니다. Thus, please refer to 따라서를 참조하시기 바랍니다 original English article 원래 영어 문서 when in doubt. 의심 스러우면.
Related Articles 관련 기사
- Fix WordPress 2.5 Image or Media Flash Uploader Not Working Issue in IE7 수정 WordPress의 이미지 또는 미디어 플래시 업로더 2.5 문제는 IE7에서 작동하지
- Flash Upgrade Eten Glofiish Windows Mobile Device ROM Firmware OS from SD Memory Card (Fix RAPIcopyfile or Update Error in Vista) 윈도우 모바일 장치 ROM의 펌웨어 업그레이 드를 Eten glofiish 플래시 타입 SD 메모리 카드 (수정이나 업데이 트에 오류가 비스타에서 RAPIcopyfile)
- Fix Virtual PC 2007 Shared Networking (NAT) Internet Not Working in Windows Server 2003, 2008 and Vista Guest OS 수정 버추얼 PC 2007 공유 네트워킹 (NAT) 기능은 Windows Server 2003 인터넷 안 됨, 2008 및 비스타의 게스트 운영 체제에
- How to Enable, Use and Support 4GB or More Physical RAM Memory in 32-bit Windows Vista 활성화하는 방법, 사용 및 지원, 4GB 또는 더많은 실제 RAM 메모리 32 - 비트 Windows Vista로
- USB Unknown Device Drive Issue, Not Working, Recognized or Connected Error After Upgrading and Installing Vista SP1 비스타 SP1으로 업그레이 드하고 설치 후 알 수없는 장치는 USB 드라이브에 문제가 아냐 일하고, 인정 또는 연결 오류
- New SanDisk Extreme III Memory Stick PRO-HG Duo With 30MB/s Read/Write Speeds 새 샌디 스크 익스 트림 III에 메모리 스틱 PRO - HG는 듀오 삼십메가바이트 / 읽기 / 쓰기 속도를이야
- How to Get Free Support and Help from Microsoft for Installing Windows Vista SP1 Problems 마이크로 소프트 윈도우 비스타 SP1을 설치하는 방법을 무료로 지원하는 문제에 대한 도움을 얻을 수
- Download Toggle Flash to Disable Adobe Flash in Internet Explorer 7 토글 플래시 비활성화 어도비 플래시 다운로드 Internet Explorer 7에서
- New Kingston DataTraveler BlackBox USB Flash Drive 새 킹스톤 DataTraveler BlackBox USB 플래시 드라이브
- How to Disable Windows Vista CD/DVD Disc Burning/Recording Function 해제하는 방법에 윈도우 비스타를 CD / DVD 디스크 굽기 / 녹음 기능

































May 2nd, 2008 06:01 2008년 5월 2일 6시 1분
1. Find your device. 해당 장치를 찾습니다.
2. Change Device Status to 2 2로 변경 장치 상태
3. Change ReadSpeedKBs to 1000 변경 ReadSpeedKBs 1000
4. Change WriteSpeedKBs to 1000 변경 WriteSpeedKBs 1000
This is the method I use…maybe it is the same on different way. 이건 내가 사용하는 방법을 ... 어쩌면 그것은 다른 방법에 대해서 같은 것입니다. This is how i started with Vista prior to SP1 it still works for me today. 이 사전은 어떻게 비스타 SP1로 여전히 오늘 나를 위해 일하는가 시작됩니다.