ReadyBoost Not Working or USB Flash Key Stick Not Support or Enabled In Windows Vista SP1仕事をしない、またはUSBフラッシュキースティックReadyBoostをサポートしないまたはWindows Vista SP1で有効になって
ReadyBoost inでReadyBoost Windows Vista Windows Vistaの uses a USB flash drive such as USB key or memory stick as additional memory to the operating system to boost system performance. USBキーやメモリースティックなどのUSBフラッシュドライブを使用して、システムのパフォーマンスを高めるには、オペレーティングシステムに追加のメモリとして。 However, after installing or upgrading to Windows Vista SP1 (and even in Windows Vista RTM), the ReadyBoost may stop working and no longer functioning, or saying that the USB flash key drive is poor in performance to run ReadyBoost.しかし、インストールまたはWindows Vista SP1にアップグレードした後(およびWindows Vista RTM版以降の偶数)で、 ReadyBoost機能とは、もはや機能し、停止することがありますか、 USBキードライブフラッシュReadyBoostを実行するとパフォーマンスが悪いです。
The symptom is that when a USB flash drive is inserted and connected, Windows Vista is still able to properly detect the USB flash drive inserted, and gives an option to let user decide whether to run ReadyBoost on the drive.そのときの症状は、 USBフラッシュドライブに挿入され、接続は、 Windows Vistaをまだ正確に検出することができますUSBフラッシュドライブに挿入し、オプションをユーザーがドライブのReadyBoostを実行するかどうかを決定できるように提供されています。 However, after evaluating the read/write IO speed of the USB flash key, Windows Vista judges that the USB memory stick is not good enough to use as ReadyBoost device, as the poor speed of the drive won’t improve any performance.しかし、読むの評価後/ USBフラッシュキーは、 Windows Vistaの裁判官は、 USBメモリに十分なReadyBoostデバイスとして使用するように良いわけではないが、 IOの書き込み速度を任意のパフォーマンスを改善されず、ドライブの速度として貧しい。 The unsupported USB Flash storage device include even the premium quality (and priced) faster ReadyBoost approved USB key, and the USB drive can be used and work properly before upgrading to Windows Vista SP1.サポートされていないUSBフラッシュストレージデバイスでも使用でき、作業が適切にWindows VistaをSP1にアップグレードする前に、プレミアム品質(と)価格の高速USBキーを承認ReadyBoostと、 USBドライブなどがあります。
The error in speed detection is probably due to USB problem facing Windows Vista SP1, which may have installed efficient USB drivers.おそらく検出のUSB問題は、 Windows VistaのSP1では、効率的なUSBドライバがインストールされている可能性がありますが直面する予定です速度でのエラーが発生しました。 As a workaround, the USB ReadyBoost key not recognized in Windows Vista SP1 (or Windows Vista RTM) issue can be fixed and resolved by tweaking the registry to force Windows Vista to recognize the USB flash drive as a valid ReadyBoost enabled device.回避策として、 Windows VistaのSP1でのUSB ReadyBoostキー(またはWindows Vista RTM版以降の)問題を解決することができますが、調整は、有効なWindows VistaのReadyBoostは、 USBフラッシュドライブとして認識させることには、レジストリの解決が認識されないデバイスが有効になっている。
Firstly, format the USB flash drive to a clean state.クリーンな状態にまず、フォーマットは、 USBフラッシュドライブ。 Then run Registry Editor (regedit), and navigate to the following registry key:を実行し、レジストリエディタ ( Regedit )を起動し、以下のレジストリキーに移動:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\EMDMgmt 探します。 HKEY_LOCAL_MACHINE \ SOFTWARE \マイクロソフト\のWindows NT \ CurrentVersion \ EMDMgmt
There are a few branch keys (similar to sub-folders under EMDMgmt) available, which has the format similar to EMDMgmtの下では、形式に類似している(サブキーに似ている枝は、いくつかのフォルダで使用可能) 、
_??_USBSTOR#Disk&Ven_Imation&Prod_Flash_Drive&Rev_1.20#83b27965024423&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}_1453414791 _ ? ? #ディスク& Ven_Imation & Prod_Flash_Drive & Rev_1.20 # 83b27965024423 & 0 # ( 53f56307 - b6bf - 11d0 - 94f2 - 00a0c91efb8b ) _1453414791 _USBSTOR
Delete all this registry keys (folders) away.すべてこのレジストリキー(フォルダ)を削除します。 These registry sub-key values store characteristics and various information or settings about each and every USB mass storage devices connected to the computer, including portable hard disk, external HDD, memory card, USB memory stick and Flash key.これらのレジストリサブキーの値を格納特性と様々な情報や、各、ポータブルハードディスク、外付けハードディスクなど、すべてのUSBマスストレージデバイスは、コンピュータに接続し、設定をメモリカード、 USBメモリは、 Flashキーを押します。
After deleting, re-insert the flash memory stick.削除後、再フラッシュメモリースティックを挿入します。 If Windows Vista still unable to enable ReadyBoost feature on USB key drive that supposedly support Ready Boost, perform the following trick. Windows Vistaの場合は、 USBキードライブをサポートに一応ブーストレディReadyBoost機能を有効にするには、以下のトリックを実行できません。
Re-open Registry Editor if you have closed it, and then navigate to the same registry key again:レジストリエディタを再オープンしている場合は閉鎖して、同じレジストリキーに再び移動:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\EMDMgmt 探します。 HKEY_LOCAL_MACHINE \ SOFTWARE \マイクロソフト\のWindows NT \ CurrentVersion \ EMDMgmt
There should be a new registry sub-key created for the USB memory stick just inserted.挿入棒だけが新しいレジストリサブキーは、 USBメモリ用に作成する必要があります。 Go to the new sub-key, and change the following registry values in the right pane to the following settings:新しいサブに移動、キーとは、以下の設定には、右側のウィンドウには、次のレジストリ値を変更:
"CacheSizeInMB"=dword:000003c0
"CacheStatus"=dword:00000001
"DeviceStatus"=dword:00000002
If the registry value name is not found, create a new DWORD (32-bit) Value and named it accordingly.場合には、レジストリ値の名前が見つからない場合、 新しい DWORD ( 32ビット)値を作成し、それに応じている。
Close Registry Editor.レジストリエディタを閉じます。 The USB flash key is now recognized as ReadyBoost enabled. USBフラッシュReadyBoostとして認識されているキーが有効になっている。 Right click on the USB memory stick drive in “Computer” to select “Properties”. USBメモリのドライブを右クリックして"コンピュータ" "プロパティを選択する" 。 Then go to the ReadyBoost tab and set the cache size and verify that ReadyBoost is working on the drive.次に、 ReadyBoost ]タブに移動すると、キャッシュサイズを設定し、 ReadyBoostは、ドライブに取り組んでいることを確認します。
IMPORTANT : You're reading a machine translated page which is provided "as is" without warranty. 重要 :あなたはマシンとして"保証なしにされている"提供されているページを翻訳読んでいる。 Unlike human translation, machine translation does not understand the grammar, semantics, syntax, idioms of natural language, thus often produce inaccurate and low quality text which is misleading and incomprehensible.人間の翻訳とは違って、機械翻訳は、不正確なため、多くの場合、低品質のテキストは、誤解を招くと理解を生産、文法、意味論、構文、自然言語のイディオムを理解していません。 Thus, please refer toしたがって、下記を参照してください original English articleオリジナルの英語の記事 when in doubt.疑わしきは。
Related Articles関連記事
- USB Unknown Device Drive Issue, Not Working, Recognized or Connected Error After Upgrading and Installing Vista SP1アップグレードおよびVistaのSP1のインストール後、 USB不明なデバイスドライブの問題ではなく、就労者、認識や接続エラー
- How to Enable PAE on 32-bit Windows Vista for 4 GB or More Memory PAEを有効にする方法を32ビットWindows Vista上では4 GB以上のメモリを
- Windows Vista Cannot Auto Find Driver for New USB Device Plugged In Windows Vistaのないオート新しいUSBデバイスのドライバの接続を見つけることができます
- Windows Vista SP1 for 36 Languages to Release on April 9 Windows VistaのSP1用の36言語4月9日に発売する
- How to Get Free Support and Help from Microsoft for Installing Windows Vista SP1 Problems無料のサポートおよびMicrosoft Windows VistaのSP1のインストールの問題から助けを得るため
- Super Talent Launches Latest PICO USB Drivesスーパーの才能を最新のピコUSBドライブを開始
- New SanDisk Extreme III Memory Stick PRO-HG Duo With 30MB/s Read/Write Speeds新しいサンディスクExtremeの三メモリースティックPRO - HGデュオ30メガバイト/読み取り/書き込み速度は秒
- Windows Vista SP1 Distributed via Windows and Automatic Update Windows VistaのSP1をWindowsおよび自動アップデート経由で配布
- Download Updated Help Files for Windows Vista SP1 (KB937286) Windows VistaのSP1のヘルプファイルをダウンロードして更新( KB937286 )
- Windows Vista SP1 May Not Install on Linux Dual Boot Systems Windows VistaのSP1をインストールすることができないLinuxのデュアルブートシステム上で

































May 2nd, 2008 06:01 2008年5月2日06:01
1. 1 。 Find your device.お客様のデバイスして下さい。
2. 2 。 Change Device Status to 2 2に変更するデバイスの状態
3. 3 。 Change ReadSpeedKBs to 1000変更ReadSpeedKBs 〜 1000
4. 4 。 Change WriteSpeedKBs to 1000変更WriteSpeedKBs 〜 1000
This is the method I use…maybe it is the same on different way.これが私に使用する方法... ...おそらくそれは別の方法で同じです。 This is how i started with Vista prior to SP1 it still works for me today.この前はどうすればVistaでSP1にはまだ開始されている私にとって、今日の作品。