ReadyBoost Not Working or USB Flash Key Stick Not Support or Enabled In Windows Vista SP1 काम नहीं कर रहा है या USB फ्लैश कुंजी चिपका नहीं सहायता ReadyBoost या Windows Vista SP1 में सक्रिय
ReadyBoost in में ReadyBoost Windows Vista Windows Vista uses a USB flash drive such as USB key or memory stick as additional memory to the operating system to boost system performance. USB कुंजी या मेमोरी स्टिक जैसे एक USB फ्लैश ड्राइव का उपयोग करता है सिस्टम के प्रदर्शन को बढ़ावा देने के लिए ऑपरेटिंग सिस्टम के लिए अतिरिक्त स्मृति के रूप में. However, after installing or upgrading to Windows Vista SP1 (and even in Windows Vista RTM), the ReadyBoost may stop working and no longer functioning, or saying that the USB flash key drive is poor in performance to run ReadyBoost. हालांकि, स्थापना या Windows Vista SP1 के उन्नयन के बाद (और Windows Vista RTM भी) में, ReadyBoost काम है और अब कामकाज, रोक सकते हैं या यह है कि USB कुंजी ड्राइव फ़्लैश कह प्रदर्शन में ReadyBoost चलाने के लिए गरीब है.
The symptom is that when a USB flash drive is inserted and connected, Windows Vista is still able to properly detect the USB flash drive inserted, and gives an option to let user decide whether to run ReadyBoost on the drive. ये लक्षण है कि जब एक USB फ्लैश ड्राइव डाला जाता है और जुड़े, Windows Vista अभी भी ठीक से USB फ्लैश की पहचान करने में सक्षम है डाला ड्राइव, और एक विकल्प उपयोगकर्ता कि ड्राइव पर ReadyBoost चलाने के लिए फैसला करने दो करने के लिए देता है. However, after evaluating the read/write IO speed of the USB flash key, Windows Vista judges that the USB memory stick is not good enough to use as ReadyBoost device, as the poor speed of the drive won't improve any performance. हालाँकि, पढ़ने के मूल्यांकन के बाद / the USB फ्लैश कुंजी, Windows Vista न्यायाधीशों कि USB मेमोरी स्टिक पर्याप्त ReadyBoost डिवाइस के रूप में उपयोग करने के लिए अच्छा नहीं है, गति IO लिखने के किसी भी प्रदर्शन में सुधार नहीं होगा ड्राइव के गरीब गति के रूप में. The unsupported USB Flash storage device include even the premium quality (and priced) faster ReadyBoost approved USB key, and the USB drive can be used and work properly before upgrading to Windows Vista SP1. इस असमर्थित USB फ्लैश भंडारण युक्ति को भी इस्तेमाल किया जा सकता है और काम ठीक से Windows Vista SP1 के उन्नयन से पहले प्रीमियम गुणवत्ता (और) का मूल्य तेजी से USB कुंजी को मंजूरी दे दी ReadyBoost, और यूएसबी ड्राइव शामिल हैं.
The error in speed detection is probably due to USB problem facing Windows Vista SP1, which may have installed efficient USB drivers. पता लगाना शायद यूएसबी समस्या Windows Vista SP1, जो कुशल USB drivers स्थापित है मई का सामना करने के लिए कारण है गति में त्रुटि. As a workaround, the USB ReadyBoost key not recognized in Windows Vista SP1 (or Windows Vista RTM) issue can be fixed and resolved by tweaking the registry to force Windows Vista to recognize the USB flash drive as a valid ReadyBoost enabled device. एक workaround के रूप में, USB कुंजी ReadyBoost Windows Vista SP1 में (या Windows Vista RTM) मुद्दा तय किया जा सकता है और tweaking द्वारा Windows Vista एक वैध ReadyBoost के रूप में USB फ्लैश ड्राइव पहचान के लिए मजबूर करने के लिए रजिस्ट्री हल पहचाना नहीं डिवाइस सक्षम होना चाहिए.
Firstly, format the USB flash drive to a clean state. एक राज्य को साफ करने के लिए सबसे पहले, प्रारूप को USB फ्लैश ड्राइव. Then run Registry Editor (regedit), and navigate to the following registry key: फिर चलाने Registry Editor (regedit), और निम्न रजिस्ट्री कुंजी पर जाएँ:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\EMDMgmt HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows NT \ CurrentVersion \ EMDMgmt
There are a few branch keys (similar to sub-folders under EMDMgmt) available, which has the format similar to EMDMgmt के अंतर्गत जो प्रारूप के समान है (उप करने के लिए इसी तरह की एक शाखा कुछ चाबियां हैं फ़ोल्डर्स) उपलब्ध है,
_??_USBSTOR#Disk&Ven_Imation&Prod_Flash_Drive&Rev_1.20#83b27965024423&0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b}_1453414791 _?? # डिस्क और Ven_Imation और Prod_Flash_Drive और Rev_1.20 # 83b27965024423 & 0 # (53f56307-b6bf-11d0-94f2-00a0c91efb8b) _1453414791 _USBSTOR
Delete all this registry keys (folders) away. यह सब registry keys (फ़ोल्डर्स) दूर हटाएँ. These registry sub-key values store characteristics and various information or settings about each and every USB mass storage devices connected to the computer, including portable hard disk, external HDD, memory card, USB memory stick and Flash key. यह रजिस्ट्री उप प्रमुख मूल्यों की दुकान विशेषताओं और विभिन्न जानकारी या प्रत्येक और पोर्टेबल हार्ड डिस्क, बाहरी HDD, सहित हर USB विपुल भंडारण उपकरणों के कंप्यूटर से जुड़ा है, के बारे में सेटिंग्स मेमोरी कार्ड, USB मेमोरी स्टिक और फ्लैश चाबी.
After deleting, re-insert the flash memory stick. हटाने के बाद फिर से इस फ्लैश मेमोरी स्टिक डालें. If Windows Vista still unable to enable ReadyBoost feature on USB key drive that supposedly support Ready Boost, perform the following trick. यदि Windows Vista अभी भी यूएसबी ड्राइव कुंजी है कि अनुमान बढ़ावा तैयार समर्थन पर ReadyBoost सुविधा सक्षम करने के लिए, निम्न चाल प्रदर्शन में असमर्थ.
Re-open Registry Editor if you have closed it, and then navigate to the same registry key again: पुनः खोलने Registry Editor यदि आप इसे बंद कर दिया है, और फिर एक ही रजिस्ट्री कुंजी के लिए फिर से नेविगेट:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\EMDMgmt HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows NT \ CurrentVersion \ EMDMgmt
There should be a new registry sub-key created for the USB memory stick just inserted. अभी डाला छड़ी एक नया रजिस्ट्री उप प्रमुख के USB स्मृति के लिए बनाया जाना चाहिए. Go to the new sub-key, and change the following registry values in the right pane to the following settings: नए उप में जाओ, कुंजी और निम्नांकित निर्धारण करने का अधिकार फलक में निम्नलिखित registry मूल्यों परिवर्तन:
"CacheSizeInMB"=dword:000003c0
"CacheStatus"=dword:00000001
"DeviceStatus"=dword:00000002
If the registry value name is not found, create a new DWORD (32-bit) Value and named it accordingly. यदि registry मूल्य का नाम नहीं मिला है, एक नया DWORD (32 बिट) वैल्यू बनाने और तदनुसार यह नाम रखा.
Close Registry Editor. Close Registry Editor. The USB flash key is now recognized as ReadyBoost enabled. इस USB फ्लैश कुंजी अब ReadyBoost के रूप में मान्यता प्राप्त है सक्षम होना चाहिए. Right click on the USB memory stick drive in “Computer” to select “Properties”. में USB मेमोरी स्टिक पर राइट क्लिक करें ड्राइव "कंप्यूटर" "का चयन करने के लिए गुण". Then go to the ReadyBoost tab and set the cache size and verify that ReadyBoost is working on the drive. तब ReadyBoost टैब पर जाकर कैश आकार सेट और ReadyBoost है कि इस अभियान पर काम कर रहा है सत्यापित करें.
IMPORTANT : You're reading a machine translated page which is provided "as is" without warranty. महत्वपूर्ण: तुम एक यंत्र के रूप में "वारंटी के बिना होता है, जो" प्रदान की जाती है पृष्ठ अनुवाद पढ़ रहे हैं. Unlike human translation, machine translation does not understand the grammar, semantics, syntax, idioms of natural language, thus often produce inaccurate and low quality text which is misleading and incomprehensible. मानव अनुवाद के विपरीत, मशीन अनुवाद, जिससे अक्सर गलत और निम्न गुणवत्ता पाठ जो गुमराह कर रहे हैं और समझ से बाहर उपज का व्याकरण, अर्थ विज्ञान, वाक्यविन्यास, प्राकृतिक भाषा के मुहावरे को समझ नहीं है. Thus, please refer to इस प्रकार, कृपया देखें original English article मूल अंग्रेजी लेख when in doubt. जब संदेह में है.
Related Articles संबंधित लेख
- Flash Upgrade Eten Glofiish Windows Mobile Device ROM Firmware OS from SD Memory Card (Fix RAPIcopyfile or Update Error in Vista) फ्लैश नवीनीकरण Eten Glofiish विंडोज मोबाइल डिवाइस ROM firmware ओएस एसडी मेमोरी कार्ड (फिक्स RAPIcopyfile या अद्यतन त्रुटि Vista में से)
- How to Enable, Use and Support 4GB or More Physical RAM Memory in 32-bit Windows Vista कैसे सक्षम करें, का उपयोग करें और समर्थन 4GB या अधिक शारीरिक रैम मेमोरी में 32 बिट Windows Vista के लिए
- How to Get Free Support and Help from Microsoft for Installing Windows Vista SP1 Problems कैसे मुक्त सहायता और माइक्रोसॉफ्ट Installing Windows Vista SP1 समस्याओं के लिए से सहायता प्राप्त करने के लिए
- Fix WordPress 2.5 Image or Media Flash Uploader Not Working Issue in IE7 फिक्स WordPress 2.5 छवि या मीडिया फ़्लैश अपलोडर IE7 में काम नहीं कर रहा निर्गम
- Fix Virtual PC 2007 Shared Networking (NAT) Internet Not Working in Windows Server 2003, 2008 and Vista Guest OS फिक्स आभासी पीसी 2007 साझा नेटवर्किंग (नेट) इंटरनेट का काम नहीं कर Windows सर्वर 2003, 2008 और Vista अतिथि ओएस में
- USB Unknown Device Drive Issue, Not Working, Recognized or Connected Error After Upgrading and Installing Vista SP1 उन्नयन और Vista SP1 स्थापित करने के बाद यूएसबी अज्ञात डिवाइस ड्राइव अंक, काम नहीं कर रहा, मान्यता प्राप्त है या कनेक्टेड त्रुटि
- Download Toggle Flash to Disable Adobe Flash in Internet Explorer 7 डाउनलोड टॉगल फ्लैश अक्षम एडोब फ्लैश करने के लिए इंटरनेट एक्सप्लोरर 7 में
- New SanDisk Extreme III Memory Stick PRO-HG Duo With 30MB/s Read/Write Speeds नई SanDisk चरम III मेमोरी स्टिक प्रो HG जोड़ी 30MB के साथ / पढ़ें / लिखें गति ओं
- How to Disable Windows Vista CD/DVD Disc Burning/Recording Function कैसे निष्क्रिय Windows Vista सीडी के / डीवीडी डिस्क जलन / रिकॉर्डिंग समारोह
- Windows Vista SP1 To Force Install on Windows Update as 'Critical' from April 18 Windows Vista SP1 स्थापित करने के लिए सेना Windows अद्यतन के रूप में '' 18 अप्रैल से गंभीर










































February 9th, 2009 20:11 फ़रवरी 9, 2009 20:11
I'm having trouble with ReadyBoost, the only values i got at EMDMgmt are, मैं EMDMgmt में मिला ReadyBoost, केवल मूल्यों के साथ मैं परेशान चल रहा है, कर रहे हैं
(Default) (डिफ़ॉल्ट)
AllowNewCachesByDefault AllowNewCachesByDefault
GroupPolicyDisallowCaches GroupPolicyDisallowCaches
1# there are no other Devices 1 # वहाँ कोई अन्य उपकरण हैं
2# i tryed other forums 2 # मैं अन्य मंचों tryed
please help me out, i don't want to reinstall Vista just becaus ReadyBoost doesn't work. मेरी मदद करो, मैं Vista reinstall नहीं करना चाहता हूँ बस ReadyBoost काम नहीं करता है becaus.
i'm running with 2GB RAM at the moment, मैं इस समय 2GB RAM के साथ चल रहा हूँ
but that ain't enough >:) लेकिन यह पर्याप्त नहीं है>:)
December 27th, 2008 05:29 दिसम्बर, 27 2008 05:29
I went to that registry key: मुझे लगता है कि रजिस्ट्री कुंजी के पास गया:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\EMDMgmt HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows NT \ CurrentVersion \ EMDMgmt
… and I found the branch of my USB device, so I deleted it as you asked, but when I reconnected the USB device, I didn't find any new registry sub-key, just the parent folder (EMDMgmt) and three values into it: ... और मैं, जैसा कि आप से पूछा तो मुझे है, लेकिन इसे नष्ट कर दिया, जब मैं USB device reconnected मेरे USB युक्ति के शाखा पाया, मैं तो सिर्फ माता पिता फ़ोल्डर (EMDMgmt) और तीन मूल्यों में कोई नया रजिस्ट्री उप प्रमुख नहीं मिला इसे:
(Default) (डिफ़ॉल्ट)
AllowNewCachesByDefault AllowNewCachesByDefault
GroupPolicyDisallowCaches GroupPolicyDisallowCaches
Why isn't any sub-folder? क्यों नहीं किसी भी उप फ़ोल्डर? Do you know what did I do wrong and/or how to fix it? / या कि यह कैसे तय करने के लिए आप क्या मैं और गलत क्या किया पता है? Thanks!! धन्यवाद!!
PS: sorry for my bad english. पुनश्च: माफ करना मेरा बुरा अंग्रेजी के लिए.
May 2nd, 2008 06:01 2 मई, 2008 06:01
1. 1. Find your device. अपनी डिवाइस का पता लगाएं.
2. 2. Change Device Status to 2 2 करने के लिए बदलें डिवाइस स्तर
3. 3. Change ReadSpeedKBs to 1000 बदलें ReadSpeedKBs करने के लिए 1000
4. 4. Change WriteSpeedKBs to 1000 बदलें WriteSpeedKBs करने के लिए 1000
This is the method I use…maybe it is the same on different way. यह मैं प्रयोग की विधि ... शायद यह अलग रास्ते पर ही है. This is how i started with Vista prior to SP1 it still works for me today. यह मैं कैसे Vista के साथ पूर्व SP1 के लिए यह अभी भी मेरे लिए आज कार्य शुरू किया है.