Permanently Turn Off and Disable 64-bit (x64) Windows Vista Forced Driver Signature Signing with ReadyDriver Plus永久關閉，並禁用64位（ x64 ） Windows Vista的驅動程序簽名強迫簽署的ReadyDriver加
In 64-bit在64位 Windows Vista Windows Vista中 (x64 edition), Microsoft enforces requirement for loading of kernel-mode software such as device drivers, filter drivers and services to have Kernel Mode Code Signing (KMCS), especially driver binaries that load at boot time (”boot start drivers”) which must contain an embedded signature. （ x64版） ，微軟強制要求裝載的內核模式軟件，如設備驅動程序，篩選器驅動程序和服務的內核模式代碼簽名（ KMCS ） ，特別是司機二進制文件加載在開機的時候啟動（ “開機啟動驅動程序” ） ，其中必須包含一個嵌入式簽字。 Failing so, user will encounter various error messages below, for example:如果不這樣，用戶會遇到各種錯誤訊息如下，例如：
- This driver has been blocked from loading.這名司機已被封鎖加載。
- Can not connect to low level driver.無法連接到低級別的驅動程序。 Please reinstall The Driver under Local system administrator account or try to start driver manually using “Low Level Driver Installation” shortcut.請重新安裝驅動程序根據本地系統管理員帳戶或嘗試啟動手動司機使用“低級別驅動程序安裝”捷徑。
- Can not load low level device driver.不能負荷水平低的設備驅動程序。 Please restart application.請重新啟動應用程序。
- Windows cannot verify the digital signature for this file. Windows無法驗證數字簽名的這個檔案。 A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source.最近的硬件或軟件改變可能已經安裝了檔案，簽訂不正確或損壞的，或者說可能是惡意軟件來歷不明。
- Windows failed to start.的Windows無法啟動。 A recent hardware or software change might be the cause.最近的硬件或軟件的變化可能是原因。
- Error code錯誤代碼 0xc0000428 . 。
Worse still, the original command to disable the driver signature integrity check permanently from within Windows command prompt, “bcdedit -set loadoptions DDISABLE_INTEGRITY_CHECKS” has been muted in更糟糕的是，原來的命令停用的司機簽字完整性檢查範圍內永久的Windows命令提示符下， “ bcdedit集loadoptions DDISABLE_INTEGRITY_CHECKS ”已靜音的 Windows Vista SP1 Windows Vista的SP1的 (prior to SP1 has also been removed via various hotfixes), which returns “an error occurred while attempting to reference the specified entry. （事先到SP1也被刪除通過各種修補程序） ，其中回報“時發生錯誤嘗試參考指定的條目。 The system cannot find the file specified” error message instead.系統找不到指定的檔案“錯誤訊息。 Thus, most modified system files, such as patched tcpip.sys to increase concurrent half-open TCP/IP connection limit can be applied and used.因此，大多數修改系統文件，如修補tcpip.sys增加並發半開TCP / IP連接限制可用於和使用。
One way of workaround and resolution to the requirements of code signing with digital signature or certificate that Microsoft trusts problem is by pressing F8 during initial boot of the Windows Vista system, and then select Disable Driver Signature Enforcement in the “Advanced Boot Options” menu.一個變通的方式和決議的要求與代碼簽名數字簽名或證書，微軟相信問題是按F8鍵在初始啟動的Windows Vista系統，然後選擇禁用驅動簽名執法中的“高級啟動選項”菜單。 However, the selection only good for the session, and user have to repetitively do the same thing (pressing F8 to disable signed driver enforcement) again and again on every system reboot.然而，只有選擇適合的會議上，和用戶必須反复做同樣的事情（按F8以禁用簽名的驅動程序強制執行）一次又一次地在每個系統重新啟動。 If the user forget the disable or turn off the forced driver signing ‘feature’, the system will probably crashes, or simply can’t use.如果用戶忘記了禁用或關閉司機被迫簽署'功能' ，該系統將可能崩潰，或根本無法使用。
To make the task of turning off digital certificate signed driver mandatory requirement in x32 and x64 Windows Vista (yes, 32-bit Windows Vista has such security enforcement too, although less strict than 64-bit version) easier, Mr. Orange Sunshine has created ReadyDriver Plus which will allow user to automate the boot up Windows Vista process without driver singing enforcement.為了使任務關掉數字證書簽名的驅動程序強制性要求在x32和x64的Windows Vista （是的， 32位Windows Vista的這種安全執法太，雖然較不嚴格的比64位版本）輕鬆，陽光橙先生創建ReadyDriver加這將使用戶能夠自動啟動Windows Vista的進程而無需駕駛員唱歌執法。 ReadyDriver Plus is based on ReadyDriver boot image by Uhlik which has to boot up from CD, floppy drive or USB drive. ReadyDriver Plus是基於ReadyDriver開機的形象Uhlik已啟動從光盤，軟盤驅動器或USB驅動器。 ReadyDriver Plus improves from original Ready Driver by allowing local hard disk installation, eliminating the need to boot from another device. ReadyDriver加提高準備從原來的驅動程序，允許本地硬盤安裝，無需啟動從另一個裝置。
ReadyDriver Plus install itself as boot.bin file, and then modifies Windows Vista Boot Configuration Data (BCD), which is then read by Windows Boot Manager (the bootloader for Vista) to load ReadyDriver. ReadyDriver另外自行安裝的boot.bin文件，然後修改Windows Vista的啟動配置數據（聲BCD ） ，然後宣讀了Windows啟動管理器（啟動程序的Vista ）加載ReadyDriver 。 When Windows Vista boot loader reads BCD, it loads ReadyDriver which will then makes the appropriate selection to disable Signed Driver Signature Enforcement, based on what user choose to install.當Windows Vista啟動加載器讀取的BCD ，它負載ReadyDriver然後將作出適當的選擇禁用簽名驅動程序簽名執法的基礎上，什麼用戶選擇安裝。 So in a way, ReadyDriver Plus manages to permanently disable driver signing enforcement in Windows Vista, both x32 and x64, by automatically select “Disable Driver Signature Enforcement” option in the “Advanced Boot Options” menu on system startup.因此，從某種意義上講，管理ReadyDriver加永久禁用驅動程序簽署執行在Windows Vista中，無論x32和x64 ，通過自動選擇“禁用司機簽名執法”選項，在“高級啟動選項”菜單的系統啟動。
Download下載 ReadyDriver Plus 1.1 ReadyDriver加1.1 . 。
There are a few options that user can select during installation of ReadyDriver Plus.有幾個選項，用戶可以選擇在安裝過程中的ReadyDriver加。 However, it’s recommended to leave all options as it’s (especially the /BOOT path, but must be the correct drive letter which Vista is installed), else it defeats the purpose to install ReadyDriver Plus.然而，它的建議離開所有的選擇，因為它的（特別是/開機路徑，但必須是正確的驅動器信Vista安裝） ，否則失敗的宗旨安裝ReadyDriver加。 Dual-boot or multi-boot system should change the keystroke setting accordingly (ReadyDriver Plus will be installed as additional ‘OS’ item under Windows Vista, so you require 1 up stroke to reach Windows Vista OS. If you’re dual-boot, depending on location of Windows Vista on operating system selection menu, the automatic process may need 2 keystrokes to reach the item).雙啟動或多啟動系統應該改變按鍵設置相應的（ ReadyDriver加將安裝額外的'操作系統'項目下的Windows Vista ，所以你需要了腦中風一日達到Windows Vista操作系統。如果你是雙啟動，根據位置的Windows Vista的作業系統選擇菜單，自動過程可能需要2到按鍵的項目） 。 Most user should be able to complete the setup by simply clicking “Next”.大多數用戶應該能夠完成設置，只需點擊“下一步” 。
ReadyDriver Plus supports both 32-bit and 64-bit (x86 and x64) versions of Windows Vista, including Windows Vista SP1 (Service Pack 1). ReadyDriver另外支持32位和64位（ x86和x64 ）版本的Windows Vista ，包括Windows Vista的SP1的（ Service Pack 1中） 。 Ready Driver Plus can be uninstall from Control Panel Programs and Features.準備驅動器加卸載可以從控制面板程序和功能。
IMPORTANT : You're reading a machine translated page which is provided "as is" without warranty. 重要：您正在閱讀的機器翻譯網頁這是“原樣”提供，無保修。 Unlike human translation, machine translation does not understand the grammar, semantics, syntax, idioms of natural language, thus often produce inaccurate and low quality text which is misleading and incomprehensible.不同人的翻譯，機器翻譯不明白的語法，語義，句法，成語自然語言，因此，往往產生不準確，低質量的文字這是誤導和費解。 Thus, please refer to因此，請參閱 original English article英文原文的文章 when in doubt.當懷疑。
Related Articles相關文章
- Windows Vista Failed to Start with ntkrnlpa.exe or ntoskrnl.exe 0xc0000428 Error Status Windows Vista的啟動失敗或與ntkrnlpa.exe的Ntoskrnl.exe 0xc0000428錯誤狀態
- 64-bit (x64) Windows Vista SP1 (6001.1800) tcpip.sys Auto Patcher to Fix Event ID 4226 and Unlock Increase Maximum Connections Allowed 64位（ x64 ）的Windows Vista SP1的（ 6001.1800 ） tcpip.sys自動Patcher固定事件ID 4226和解鎖增加最大連接寵物
- Workaround to Run VMWare Server on Windows Vista解決辦法運行VMware服務器在Windows Vista
- How to Disable Quick Launch Bar Feature如何禁用快速啟動欄功能
- How to Enable PAE on 32-bit Windows Vista for 4 GB or More Memory如何啟用PAE的32位Windows Vista的4 GB或更多的內存
- How to Disable Windows Vista CD or DVD Drive Auto Eject or Open Feature如何禁用Windows Vista的CD或DVD驅動器自動彈出或開放特點
- Windows Vista Cannot Auto Find Driver for New USB Device Plugged In Windows Vista無法自動找到新的驅動程序的USB設備插入
- Download Updated Help Files for Windows Vista SP1 (KB937286)下載最新的幫助文件為Windows Vista SP1的（ KB937286 ）
- How to Suppress and Bypass System32 File System Redirect to SysWOW64 Folder with Sysnative如何制止和繞行System32文件系統重定向到Syswow64資料夾與Sysnative
- Error Code 0×80070002 During Windows Vista SP1 Setup Install錯誤代碼0 × 80070002在Windows Vista的SP1的安裝程序安裝
May 16th, 2008 09:50 2008年五月十六日09:50
[...] the best way, download and install ReadyDriver Plus which permanently automate boot up to Windows Vista with signed driver signature enforcement [...] [...]的最佳方式，請下載並安裝該ReadyDriver加永久自動啟動到Windows Vista與司機簽訂簽字執法[...]
May 16th, 2008 09:53 2008年五月十六日09:53
[...] ReadyDriver Plus to permanently disable and turn off disable driver signing enforcement automaticall… on every system [...] [...] ReadyDriver加永久禁用和關閉禁用驅動器自動簽署執法...每一個系統[...]
May 17th, 2008 02:19 08年五月17日02:19
serioulsy this is the shizz serioulsy這是shizz
May 18th, 2008 02:31 2008年5月18日2時31分
[...] and install ReadyDriver Plus 1.1 with default options during installation. [...]和安裝ReadyDriver加1.1的默認安裝過程中選擇。 ReadyDriver Plus will bypass signed drivers integrity [...] ReadyDriver加將簽署的司機繞道完整[...]
May 21st, 2008 17:48 08年5月21日17:48
[...] driver signature enforcement (If disable forced driver signing requirement fix the issue, check out ReadyDriver Plus that automates disabling of driver signature enforcement, used normally when user installs third-party unsigned driver as in the case of patched tcpip.sys), [...] [...]司機簽名執法（如果禁用司機被迫簽署要求解決問題，檢查ReadyDriver另外，自動化禁用司機簽名執法，正常使用時，用戶安裝了第三方未簽名的驅動程序的情況下tcpip.sys補丁） ， [...]
May 26th, 2008 22:12 2008年5月26號22:12
RedyDriver Plus does not work on my system. RedyDriver不加在我的系統。 It just keeps saying that boot.bin can not be found or is corrupt.這只是說，保持boot.bin無法找到或已損壞。 I have tried uninstalling and reinstalling several times and have even downloaded a fresh copy of RedyDriver and installing with different settings and still does not work.我試圖卸載並重新安裝好幾次，甚至下載一個新的副本RedyDriver和安裝不同的設置和仍然沒有工作。 I am running Vista Ultimate x64 with SP1.我運行Vista Ultimate的64位帶有SP1 。 This driver signing stuff in Vista is raally a pain in the ass!!這個驅動程序簽名的東西在Vista是raally疼痛的屁股！
June 30th, 2008 09:39 2008年6月30日9時39分
It’s inconsistent on my system.這是違背我的系統。 The program seems to go through a random number of “strokes” no matter which number I select during installation, and more often than not will take me to a blank screen with a blinking cursor.該計劃似乎經過隨機編號的“中風”無論我選擇一些在安裝過程中，更往往不是將帶我到一個空白屏幕，閃爍的光標。
June 30th, 2008 09:41 2008年6月30日9時41分
If anyone has a consistent workaround, please spam it on every forum.如果任何人有一個一致的解決方案，請垃圾就每一個論壇。 Don’t let M$ run our lives PLEASE.不要讓百萬元運行我們的生活吧。
August 11th, 2008 15:26 08年8月11日15:26
I’m trying to get ati tray tools for radeon x1600 to work.我想獲得ATI的托盤工具Radeon X1600獨立工作。 But getting the infamous “cannot load low level drivers” error.可是臭名昭著的“不能負荷水平低司機”的錯誤。 Trying readydriver plus 1.1, I’m getting the same error as Riored.試圖readydriver加1.1 ，我收到同樣的錯誤作為Riored 。 It says boot.bin can not be found or corrupt.它說， boot.bin無法找到或損壞。 Running on vista ultimate x64 sp1.運行在Vista SP1的最終64位。 Any suggestions?任何建議嗎？
August 29th, 2008 08:54 2008年8月29日8點54分
On my system, I dont see a file boot.bin under directory \BOOT.在我的系統，我不看檔案boot.bin目錄下的\啟動。
As a result when I reboot system after installing ReadyDriver, it just keeps saying that boot.bin can not be found or is corrupt.由於當我重新啟動系統後，安裝ReadyDriver ，它只是不斷說， boot.bin無法找到或已損壞。 I have tried uninstalling and reinstalling several times and have even downloaded a fresh copy of RedyDriver and installing with different settings and still does not work.我試圖卸載並重新安裝好幾次，甚至下載一個新的副本RedyDriver和安裝不同的設置和仍然沒有工作。
September 1st, 2008 22:26 08年9月1日22:26
i get an error message:readydriver plus 1.1我得到一個錯誤信息： readydriver加1.1
uninstall previous versions first at control panel,.卸載以前的版本首先在控制面板。 add/remove programs添加/刪除程序
my problem is i had an startup issue and it used a system restore, to fix it我的問題是我有一個啟動的問題，它採用了系統還原，進行修復
now it WONT show Readydriverplus at all現在習慣顯示在所有Readydriverplus
even with your uninstaller it wont show up即使您卸載它慣於顯示
neither a manual search works, ???既不是手動搜索工程， ？ ？ ？ how do i manually uninstall: readydriver plus 1.1我要如何手動卸載： readydriver加1.1
ive used the app before ok, now i removed the tcpip.sys and readydriver plus 1.1, but i cant installl it now, so frack, anyone knows性的應用程序使用之前確定，現在我取消了tcpip.sys和readydriver加1.1 ，但我不能installl現在，所以frack ，任何人都知道
RMT區域管理小組
September 4th, 2008 08:49 2008年9月4日8時49
First I installed ReadyDriver Plus.首先，我安裝ReadyDriver加。 THEN I patched tcpip.sys.然後我tcpip.sys補丁。 You must use the right patcher for the VERSION of tcpip.sys you have.您必須使用權patcher版本的tcpip.sys你。 If your version is 18063 — use ver 2.2 of the patcher.如果您的版本是18063 -使用版本2 .2p atcher。 Available here:可在這裡：
http://www.mydigitallife.info/2008/02/17/download-vista-tcpipsys-and-uac-auto-patcher-to-increase-tcp-connection-limit/
DBD當歸補血湯
September 10th, 2008 06:39 2008年9月十日6點39分
Como desfaço as mudanças no sistema que o ready driver faz na tela de boot ?科摩desfaço作為mudanças沒有你的系統驅動程序ö準備扎伊爾納影視的開機？
Já fiz o restauro de sistema e ponto de restaurãção ea tela de boot original do Vista não retornou ! ö子專業信息中心的系統修復德é橋德restaurãção影視處的大海原來不開機Vista的不retornou ！
Alguém que tenha conseguido retirar ess eprograma do boot podería me ensinar ? Alguém你一〇公頃conseguido retirar出版社eprograma不開機podería我ensinar ？
Obrigado.奧布里加。
September 19th, 2008 01:53 08年9月19號01:53
Hi all,大家好，
for the people who are using dual boot with Windows XP and Vista.人民誰使用的是雙啟動的Windows XP和Vista 。 The application standard uses the drive letter where Vista is installed.標準的應用使用的磁碟機代號Vista安裝。 If you install it here and it is not working try and look in the drive where XP is installed (uncheck the hide protected operations system files under folder options).如果您安裝在這裡，這不是工作的嘗試，並期待在驅動器XP安裝（取消隱藏受保護的作業系統文件下文件夾選項） 。 You should look for a folder called boot.你應該尋找一個所謂的啟動文件夾。 If this folder is located on the drive where XP is installed, then you need to install this application also on this drive.如果這個文件夾所在的驅動器上的XP安裝，那麼您需要安裝此應用程序還就這個驅動器。 The key stroke is still 1.中風的關鍵仍然是1 。
Works for me, thanks.作品對我來說，謝謝。
September 19th, 2008 05:37 08年九月19日5時37分
[...] think ATI Tray Tools works. [...]認為ATI的托盤工具工程。 But you must download ready driver plus.但是，你必須下載驅動加上準備。 __________________ Can I Overclock My Brain?… All I Gotta Do Is Increase Its Stock Voltage [...] __________________我可以超頻我的大腦？ ...我愛做的是增加其股票電壓[...]
October 6th, 2008 00:41 2008年10月六號00:41
I’ve got a single boot computer with Vista x64, and when I installed ReadyDriver Plus and restarted, it selected to boot ReadyDriver Plus, but then it just hung.我有一個單一的啟動計算機與Vista x64和當我安裝ReadyDriver Plus和重新啟動時，它選擇的啟動ReadyDriver加，但它只是掛。 I had to get out my Vista installation disc and fix my tcpip.sys before I could get Windows up and running at all.我不得不離開我的Vista安裝盤和修復之前，我的tcpip.sys我能得到的Windows啟動和運行在所有。
November 4th, 2008 00:50 08年11月4日00:50
OS: Vista x64 SP1操作系統： Vista的64位SP1的
Patch: Version 2.2修補程序： 2.2版
TCPIP: 18063 TCPIP ： 18063
ReadyDriver: Version 1.1 ReadyDriver ： 1.1版
1. 1 。 Patch修補程序
- Ok, everything perfect. -好吧，一切完美。
2. 2 。 Setup ReadyDriver安裝ReadyDriver
- Ok. -確定。
3. 3 。 Reboot重新啟動
- After 2 ‘multiboot auto-selections’, hang - black screen. -在2 '多重自動選擇' ，杭-黑色畫面。