Permanently Turn Off and Disable 64-bit (x64) Windows Vista Forced Driver Signature Signing with ReadyDriver Plus永久に電源を切ると無効に64ビット( x64 ) Windows Vistaのドライバ署名の強制署名ReadyDriverプラスに
In 64-bit 64ビット Windows Vista Windows Vistaの (x64 edition), Microsoft enforces requirement for loading of kernel-mode software such as device drivers, filter drivers and services to have Kernel Mode Code Signing (KMCS), especially driver binaries that load at boot time (”boot start drivers”) which must contain an embedded signature. ( x64エディション)は、 Microsoftのカーネルをロードするためのソフトウェア要件を強制モードのデバイスドライバ、フィルタドライバとサービスなどしてカーネルモードのコード署名( KMCS ) 、特にドライバのバイナリは、起動時間( "ブート開始ドライバ" )に負荷を埋め込み署名を含める必要があります。 Failing so, user will encounter various error messages below, for example:失敗は、ユーザの下にさまざまなエラーメッセージに遭遇する、例えば:
- This driver has been blocked from loading.このドライバの読み込みがブロックされています。
- Can not connect to low level driver.低レベルのドライバに接続できません。 Please reinstall The Driver under Local system administrator account or try to start driver manually using “Low Level Driver Installation” shortcut.してくださいローカルシステム管理者アカウントの下にあるドライバを再インストールするか、手動で"低レベルのドライバのインストール"のショートカットを使用してドライバを起動してみます。
- Can not load low level device driver.低レベルのデバイスドライバを読み込むことができません。 Please restart application.アプリケーションを再起動してください。
- Windows cannot verify the digital signature for this file. Windowsがこのファイルのデジタル署名を検証することはできません。 A recent hardware or software change might have installed a file that is signed incorrectly or damaged, or that might be malicious software from an unknown source.最近のハードウェアまたはソフトウェアの変更点は、誤って、または破損し、署名されているか、または悪意のあるソフトウェアは、未知のソースからのファイルをインストールされているかもしれない可能性があります。
- Windows failed to start. Windowsの起動に失敗しました。 A recent hardware or software change might be the cause.最近のハードウェアまたはソフトウェアの変更が原因である可能性があります。
- Error codeエラーコード 0xc0000428 . 。

Worse still, the original command to disable the driver signature integrity check permanently from within Windows command prompt, “bcdedit -set loadoptions DDISABLE_INTEGRITY_CHECKS” has been muted inさらに悪いことは、元のコマンドが完全にWindowsからは、ドライバ署名の整合性チェックを無効にするコマンドプロンプトは、 " bcdedit - "にミュートされているloadoptions DDISABLE_INTEGRITY_CHECKS設定 Windows Vista SP1 Windows VistaのSP1の (prior to SP1 has also been removed via various hotfixes), which returns “an error occurred while attempting to reference the specified entry. ( SP1の前にも、さまざまな修正プログラムを介して)は、 "参照するためには、指定されたエントリを試みて、エラーが発生した返します削除されています。 The system cannot find the file specified” error message instead.このシステムは、ファイル"エラーメッセージの代わりに指定された見つけることができません。 Thus, most modified system files, such as patched tcpip.sys to increase concurrent half-open TCP/IP connection limit can be applied and used.したがって、パッチを当てtcpip.sysを変更など、ほとんどのシステムファイル、オープンのTCP / IP接続の制限を適用することができるとの同時使用の半分を向上させます。
One way of workaround and resolution to the requirements of code signing with digital signature or certificate that Microsoft trusts problem is by pressing F8 during initial boot of the Windows Vista system, and then select Disable Driver Signature Enforcement in the “Advanced Boot Options” menu.回避策は、デジタル署名、または証明書とコード署名の要件に決議案の1つの方法は、 Microsoftの信頼問題は、 Windows Vistaシステムの初期起動中にF8キーを押しているし、 [ ドライバの署名を無効に施行の"詳細ブートオプションを選択してください"メニュー。 However, the selection only good for the session, and user have to repetitively do the same thing (pressing F8 to disable signed driver enforcement) again and again on every system reboot.しかし、この選択は、セッションで、良いとユーザー繰り返し同じことをしなければならない(署名のドライバを無効に施行)が再びしてから、もう一度すべてのシステム再起動時にF8キーを押している。 If the user forget the disable or turn off the forced driver signing ‘feature’, the system will probably crashes, or simply can’t use.もし、ユーザーが無効に忘れたり、強制ドライバの署名]をオフにする機能'は、おそらくシステムがクラッシュする、または、単に使用することはできませんれます。
To make the task of turning off digital certificate signed driver mandatory requirement in x32 and x64 Windows Vista (yes, 32-bit Windows Vista has such security enforcement too, although less strict than 64-bit version) easier, Mr. Orange Sunshine has created ReadyDriver Plus which will allow user to automate the boot up Windows Vista process without driver singing enforcement. 、ミスターサンシャインオレンジを作成しましたが、以下の64ビットバージョンよりも厳格なデジタル証明書をオフにする作業を行うには、 × 32ビットのx64のWindows Vistaのドライバが必須要件に署名(そう、 32ビットWindows Vistaのも、 )簡単なセキュリティを施行しているReadyDriverプラスは、ユーザーがドライバを歌う施行せずにWindows Vistaのプロセスを自動化するためには、ブートできるようになります。 ReadyDriver Plus is based on ReadyDriver boot image by Uhlik which has to boot up from CD, floppy drive or USB drive. ReadyDriverプラスReadyDriverブートイメージをブートするCDのUhlikでは、フロッピードライブまたはUSBドライブからしている基づいています。 ReadyDriver Plus improves from original Ready Driver by allowing local hard disk installation, eliminating the need to boot from another device.元レディReadyDriverプラスドライバーからローカルのハードディスクをインストールすることで、別のデバイスからブートする必要がなくなるが向上します。
ReadyDriver Plus install itself as boot.bin file, and then modifies Windows Vista Boot Configuration Data (BCD), which is then read by Windows Boot Manager (the bootloader for Vista) to load ReadyDriver. ReadyDriverプラスboot.binファイルとして、自分自身をインストールし、 Windows Vistaのブート構成データ( BCD ) 、それがVistaのWindowsブートマネージャ(ブートローダ) ReadyDriverを読み込むためには読み取り専用ですが変更されます。 When Windows Vista boot loader reads BCD, it loads ReadyDriver which will then makes the appropriate selection to disable Signed Driver Signature Enforcement, based on what user choose to install. Windows VistaのブートローダーBCDを読み取るときには、署名ドライバの署名を無効に施行されますし、どのユーザーに基づいて、適切な選択をReadyDriverをインストールするには負荷を選択してください。 So in a way, ReadyDriver Plus manages to permanently disable driver signing enforcement in Windows Vista, both x32 and x64, by automatically select “Disable Driver Signature Enforcement” option in the “Advanced Boot Options” menu on system startup.ような方法で、永久に無効にReadyDriverプラスドライバは、 "詳細ブートオプションを自動的に"を選択してくださいドライバの署名を無効に施行"オプションでシステム起動時に"メニューWindows Vistaでは、 × 32ビットおよびx64の両方で、執行の署名を管理している。
Downloadダウンロードする ReadyDriver Plus 1.1 ReadyDriverプラス1.1 . 。

There are a few options that user can select during installation of ReadyDriver Plus.いくつかのオプションは、ユーザーReadyDriverプラスのインストール中に選択することができますしている。 However, it’s recommended to leave all options as it’s (especially the /BOOT path, but must be the correct drive letter which Vista is installed), else it defeats the purpose to install ReadyDriver Plus.しかし、これは(特に、 /ブートパスのすべてのオプションを残すが、お勧めのVistaのインストールされているのは、正しいドライブ文字である必要があります) 、それ以外はプラスReadyDriverインストールするには、目的敗。 Dual-boot or multi-boot system should change the keystroke setting accordingly (ReadyDriver Plus will be installed as additional ‘OS’ item under Windows Vista, so you require 1 up stroke to reach Windows Vista OS. If you’re dual-boot, depending on location of Windows Vista on operating system selection menu, the automatic process may need 2 keystrokes to reach the item).デュアルブートまたはマルチは、キーストロークの設定に応じて( ReadyDriverプラス'関連のOSのアイテムとしてWindows Vistaで変更する必要がありますブートシステムにインストールされますので、 Windows VistaのOSのアップストロークに達すると1が必要です。している場合は、デュアルブート、 Windows Vistaの場所に、オペレーティングシステムの選択メニューに応じて、自動プロセスでは、アイテムに達すると) 2キー入力する必要があります。 Most user should be able to complete the setup by simply clicking “Next”.ほとんどのユーザーが単に"をクリックして設定を完了できるようになります次へ" 。
ReadyDriver Plus supports both 32-bit and 64-bit (x86 and x64) versions of Windows Vista, including Windows Vista SP1 (Service Pack 1). ReadyDriver Plusの両方の32ビットおよび64ビット版Windows Vistaでは、 Windows VistaのSP1を( Service Pack 1を含む) ( x86およびx64 )のバージョンをサポートしています。 Ready Driver Plus can be uninstall from Control Panel Programs and Features.準備ドライバのプラスコントロールパネルのプログラムと機能からアンインストールすることができます。
IMPORTANT : You're reading a machine translated page which is provided "as is" without warranty. 重要 :あなたはマシンとして"保証なしにされている"提供されているページを翻訳読んでいる。 Unlike human translation, machine translation does not understand the grammar, semantics, syntax, idioms of natural language, thus often produce inaccurate and low quality text which is misleading and incomprehensible.人間の翻訳とは違って、機械翻訳は、不正確なため、多くの場合、低品質のテキストは、誤解を招くと理解を生産、文法、意味論、構文、自然言語のイディオムを理解していません。 Thus, please refer toしたがって、下記を参照してください original English articleオリジナルの英語の記事 when in doubt.疑わしきは。
Related Articles関連記事
- Windows Vista Failed to Start with ntkrnlpa.exe or ntoskrnl.exe 0xc0000428 Error Status Windows Vistaの起動に失敗しましたntkrnlpa.exeやntoskrnl.exeの0xc0000428エラーステータスをする
- 64-bit (x64) Windows Vista SP1 (6001.1800) tcpip.sys Auto Patcher to Fix Event ID 4226 and Unlock Increase Maximum Connections Allowed 64ビット( x64 ) Windows VistaのSP1を( 6001.1800 )修正プログラムイベントID 4226のロックを解除すると最大接続許可を増やすオートtcpip.sysを繕う
- Workaround to Run VMWare Server on Windows Vista回避策はVMWare ServerにWindows上でVistaを実行する
- How to Disable Quick Launch Bar Featureクイック起動バーに機能を無効にする方法
- How to Enable PAE on 32-bit Windows Vista for 4 GB or More Memory PAEを有効にする方法を32ビットWindows Vista上では4 GB以上のメモリを
- How to Disable Windows Vista CD or DVD Drive Auto Eject or Open Feature無効にする方法Windows VistaのCDまたはDVDドライブの自動イジェクトまたはオープン機能に
- Windows Vista Cannot Auto Find Driver for New USB Device Plugged In Windows Vistaのないオート新しいUSBデバイスのドライバの接続を見つけることができます
- Download Updated Help Files for Windows Vista SP1 (KB937286) Windows VistaのSP1のヘルプファイルをダウンロードして更新( KB937286 )
- How to Suppress and Bypass System32 File System Redirect to SysWOW64 Folder with Sysnativeどのように抑えるとバイパスSystem32ファイルシステムをリダイレクトするSysWOW64フォルダにSysnativeで
- Error Code 0×80070002 During Windows Vista SP1 Setup Installエラーコード0 × 80070002中にWindows VistaのSP1のセットアップをインストールする

































May 16th, 2008 09:50 5月16日、 2008年09:50
[...] the best way, download and install ReadyDriver Plus which permanently automate boot up to Windows Vista with signed driver signature enforcement [...] [...]の最良の方法は、ダウンロードしてインストールReadyDriverプラスは、永久にWindows Vistaに署名ドライバの署名の施行で起動を自動化[...]
May 16th, 2008 09:53 5月16日、 2008年09:53
[...] ReadyDriver Plus to permanently disable and turn off disable driver signing enforcement automaticall… on every system [...] [...] ReadyDriverプラスドライバーが完全に無効にすると無効に施行を自動的に署名...すべてのシステムに電源を切る[...]
May 17th, 2008 02:19 5月17日、 2008年02:19
serioulsy this is the shizz serioulsyこのshizzです
May 18th, 2008 02:31 5月18日、 2008年02:31
[...] and install ReadyDriver Plus 1.1 with default options during installation. [...] 、インストール時にデフォルトのオプションでReadyDriverプラス1.1をインストールします。 ReadyDriver Plus will bypass signed drivers integrity [...] ReadyDriverプラス署名されたドライバの整合性をバイパスする[...]
May 21st, 2008 17:48 2008年5月21日17:48
[...] driver signature enforcement (If disable forced driver signing requirement fix the issue, check out ReadyDriver Plus that automates disabling of driver signature enforcement, used normally when user installs third-party unsigned driver as in the case of patched tcpip.sys), [...] [...]ドライバ署名の施行(強制ドライバを無効にした場合、この問題は、 ReadyDriverプラス、ドライバの署名の施行は、通常時にユーザーがサードパーティの署名のないドライバにパッチを当てtcpip.sysをインストールの場合は無効として使用のチェックアウトを自動化する修正プログラムを要求署名) 、 [...]
May 26th, 2008 22:12 2008年5月26日22:12
RedyDriver Plus does not work on my system. RedyDriverプラス私のシステムでは動作しません。 It just keeps saying that boot.bin can not be found or is corrupt.ただ、 boot.binまたは破損しているが見つからないと言っている。 I have tried uninstalling and reinstalling several times and have even downloaded a fresh copy of RedyDriver and installing with different settings and still does not work.私は何回か再インストールやアンインストールを試みたが、さらにRedyDriverの新鮮なコピーをダウンロードし、インストールとは異なる設定では動作しません。 I am running Vista Ultimate x64 with SP1.私はx64のVista UltimateにSP1を実行している。 This driver signing stuff in Vista is raally a pain in the ass!!このドライバはVistaの署名raallyものは、お尻の痛みです!
June 30th, 2008 09:39 2007年6月、 30日、 2008年09:39
It’s inconsistent on my system.それは私のシステム上の矛盾だ。 The program seems to go through a random number of “strokes” no matter which number I select during installation, and more often than not will take me to a blank screen with a blinking cursor.このプログラムよりも、空白の画面に点滅するカーソルで私は"打"のインストール時に選択していようと私は、数のランダムな番号で、より頻繁に行っているようだ。
June 30th, 2008 09:41 2007年6月、 30日、 2008年09:41
If anyone has a consistent workaround, please spam it on every forum.もし、すべてのフォーラムには、スパムを回避してください一貫している。 Don’t let M$ run our lives PLEASE.私たちの生活でください実行メートル$せてはならない。
August 11th, 2008 15:26 8月11日、 2008年15:26
I’m trying to get ati tray tools for radeon x1600 to work. ATIのradeonのX1600を私のために働くするためのツールトレイを取得しようとしている。 But getting the infamous “cannot load low level drivers” error.しかし、悪名高い" "エラーが低レベルのドライバをロードすることはできませんている。 Trying readydriver plus 1.1, I’m getting the same error as Riored. readydriverプラス1.1しようとして、私Rioredと同じエラーが表示されました。 It says boot.bin can not be found or corrupt.それboot.binが見つからない、または破損している。 Running on vista ultimate x64 sp1. Vistaのx64のSP1を究極に実行する。 Any suggestions?何か提案ある?
August 29th, 2008 08:54 2008年8月29日08:54
On my system, I dont see a file boot.bin under directory \BOOT.私のシステムでは、私のディレクトリの下のファイルをboot.bin \ブートを参照してくださいドント。
As a result when I reboot system after installing ReadyDriver, it just keeps saying that boot.bin can not be found or is corrupt.その結果ReadyDriverのインストール後にシステムを再起動するときに、それだけでは、 boot.binまたは破損しているが見つからないと言っている。 I have tried uninstalling and reinstalling several times and have even downloaded a fresh copy of RedyDriver and installing with different settings and still does not work.私は何回か再インストールやアンインストールを試みたが、さらにRedyDriverの新鮮なコピーをダウンロードし、インストールとは異なる設定では動作しません。
September 1st, 2008 22:26 2008年9月1日22:26
i get an error message:readydriver plus 1.1私は、エラーメッセージ: readydriverプラス1.1を取得
uninstall previous versions first at control panel,.以前のバージョンをアンインストールコントロールパネルで、初めて。 add/remove programs追加/プログラムを削除
my problem is i had an startup issue and it used a system restore, to fix it私の問題を私はスタートアップの問題をしていたとは、システムの復元を使用すると、それを修正することです
now it WONT show Readydriverplus at all今では習慣でReadydriverplusショー
even with your uninstaller it wont show upアンインストーラを使用しても、それを示す習慣
neither a manual search works, ???どちらも、マニュアルの検索機能、 ? ? ? how do i manually uninstall: readydriver plus 1.1どうすれば手動でアンインストール: readydriverプラス1.1を行う
ive used the app before ok, now i removed the tcpip.sys and readydriver plus 1.1, but i cant installl it now, so frack, anyone knows IVEの[ OK ]を前に、アプリケーションを使用すると、今私が、 tcpip.sysをreadydriverプラス1.1と削除私は今隠語installlので、 frack 、誰でも知っている
RMT
September 4th, 2008 08:49 9月、第4回2008年08:49
First I installed ReadyDriver Plus.最初に私ReadyDriver Plusをインストールします。 THEN I patched tcpip.sys.それからパッチを当てtcpip.sysを。 You must use the right patcher for the VERSION of tcpip.sys you have.あなたの持ってtcpip.sysを繕うのバージョンのための権利を使用する必要があります。 If your version is 18063 — use ver 2.2 of the patcher.お使いのバージョン18063です-繕うの使用バージョン2 .2。 Available here:こちらをご覧ください:
http://www.mydigitallife.info/2008/02/17/download-vista-tcpipsys-and-uac-auto-patcher-to-increase-tcp-connection-limit/
DBDのDBD
September 10th, 2008 06:39 9月10日、 2008年06:39
Como desfaço as mudanças no sistema que o ready driver faz na tela de boot ?コモdesfaçoのないシステムを選択し、テラデブートな準備ドライバfaz mudançasか?
Já fiz o restauro de sistema e ponto de restaurãção ea tela de boot original do Vista não retornou !電子橋デrestaurãção EAのテラデブート元を行うジャfizまたはVistaのシステムrestauroデretornouはありません!
Alguém que tenha conseguido retirar ess eprograma do boot podería me ensinar ? Alguémケ十ヘクタールconseguido retirar S字形eprograma poderíaメインensinarブートのですか?
Obrigado. Obrigado 。
September 19th, 2008 01:53 9月19日、 2008年01:53
Hi all,ハワイのすべては、
for the people who are using dual boot with Windows XP and Vista.は、 Windows XPおよびVistaでデュアルブートを使用している人々のため。 The application standard uses the drive letter where Vista is installed.は、アプリケーションの標準のドライブ文字は、 Vistaがインストールされています。 If you install it here and it is not working try and look in the drive where XP is installed (uncheck the hide protected operations system files under folder options).ここにそれをインストールする場合は、それを試すに動作していませんし、ドライブに見えるがXPの(チェックボックスをオフにフォルダオプションで保護業務のシステムファイルを非表示)がインストールされています。 You should look for a folder called boot.あなたはブートと呼ばれるフォルダを探す必要があります。 If this folder is located on the drive where XP is installed, then you need to install this application also on this drive.このフォルダは、 XPがインストールされているドライブしてもこのドライブでこのアプリケーションをインストールする必要があります。 The key stroke is still 1.キーストロークはまだ1です。
Works for me, thanks.作品は私にとって、ありがとう。
September 19th, 2008 05:37 9月19日、 2008年05:37
[...] think ATI Tray Tools works. [...]と思うATIのトレイツール動作します。 But you must download ready driver plus.しかし、準備プラスドライバーをダウンロードする必要があります。 __________________ Can I Overclock My Brain?… All I Gotta Do Is Increase Its Stock Voltage [...] __________________私は自分の脳のか...すべて私はお奨めのオーバークロックを行うことができるの在庫電圧を増加して[...]
October 6th, 2008 00:41 2008年10月6日00:41
I’ve got a single boot computer with Vista x64, and when I installed ReadyDriver Plus and restarted, it selected to boot ReadyDriver Plus, but then it just hung.私は、 Vistaのx64ので1つのブートコンピュータがあるんだReadyDriver Plusをインストールして再起動するときに、それを起動するReadyDriverプラスが、それだけでハングを選択しました。 I had to get out my Vista installation disc and fix my tcpip.sys before I could get Windows up and running at all.私はVistaのインストールディスクを入手する前に、私のWindowsで動作させる可能性があるとすべての私のtcpip.sysを修正していた。
November 4th, 2008 00:50 11月、第4回2008年00:50
OS: Vista x64 SP1のOS : Vistaのx64のSP1を
Patch: Version 2.2アップデート:バージョン2.2
TCPIP: 18063 TCPIP : 18063
ReadyDriver: Version 1.1 ReadyDriver :バージョン1.1
1. 1 。 Patchパッチ
- Ok, everything perfect. -オク、すべてが完璧。
2. 2 。 Setup ReadyDriverセットアップReadyDriver
- Ok. -分かりました。
3. 3 。 Reboot再起動
- After 2 ‘multiboot auto-selections’, hang - black screen. -後2 'マルチブート自動選択' 、ハング-黒い画面。