How to Open Windows Vista Recovery Environment (RE) Console from Installation CD如何打開Windows Vista的恢復環境（重新）控制台從安裝CD

Installation DVD of安裝DVD版 Windows Vista Windows Vista中 contains a new Windows Recovery Environment (aka Windows RE), which completely replaces the recovery console in Windows XP.包含一個新的Windows修復環境（又名的Windows稀土） ，其中完全取代Windows XP的恢復控制台。 Commonly known as Recovery Manager, Windows RE is a recovery platform based on Windows Preinstallation Environment (Windows PE), and supersedes most functions or tasks from recovery console.通常被稱為恢復管理器時， Windows可再生能源是一個回收平台基於Windows預安裝環境（ Windows PE ） ，並取代大部分職能或任務從故障恢復控制台。 Windows RE provides two main functionalities:稀土的Windows提供了兩個主要功能：

1. Automatic diagnosis and repair of boot problems using a tool called Startup Repair.自動診斷和修復的啟動問題，使用的工具稱為啟動修復。
2. A centralized platform for advanced recovery tools such as command prompt and ability to restore to a System Restore points.集中平台，先進的恢復工具，如命令提示符和能力恢復到一個系統還原點。

As mentioned, Windows Recovery Environment or Windows RE is stored on Windows Vista installation setup DVD, and end-users will have to boot up from the DVD to access the Windows RE and Startup Repair.如前所述， Windows修復環境或Windows可再生能源是儲存在Windows Vista安裝安裝DVD和最終用戶將不得不啟動從DVD存取Windows RE和啟動修復。 For users using OEM-made computers, most Windows RE already pre-installed on the hard disk in recovery partition or EISA partition, which is accessible via a function key on system startup.對於用戶使用的OEM製造的電腦，大多數Windows稀土已經預先安裝在硬盤上的恢復分區或EISA磁碟分割，這是可以通過功能鍵對系統啟動。 In you’re in a corporate with Software Assurance or Volume licensing, Windows RE may be available for network boot via a WDS server.在您在企業與軟件保證或批量授權時， Windows可再生能源可用於網絡啟動通過廣域數據服務的服務器。

This guide details the steps with illustrations on how to access and open Windows RE Console using Windows Vista installation DVD.本指南詳細的步驟與插圖就如何獲取和打開Windows稀土控制台使用Windows Vista安裝DVD上。

1. Restart the computer, and press a function key (depends on motherboard manufacturer or OEM brand) to go to CMOS’s BIOS configuration.重新啟動電腦，並按下功能鍵（取決於主板製造商或OEM品牌）去的CMOS的BIOS配置。
2. Set the boot device ranking or priority so that the first device to boot will be CD/DVD optical drive.設置開機裝置排名或優先事項，以便第一啟動設備將的CD / DVD光盤驅動器。
3. Save the CMOS.保存的CMOS 。
4. Shutdown the computer.關閉計算機。
5. Insert the Windows Vista installation DVD into DVD drive disc tray.插入Windows Vista安裝DVD到DVD驅動器的光碟托盤。 Windows Anytime Upgrade DVD can be used in the case that user don’t have normal installation DVD. Windows隨時升級的DVD可用於用戶的情況下，沒有正常的安裝DVD上。
6. Power on the PC.電源在電腦上。
7. On some system, user requires to press any key to boot from CD or DVD disc drive, even though first boot device has been set to CD or DVD drive.在一些系統，用戶需要按任何鍵啟動CD或DVD光盤驅動器，即使第一次開機裝置已設定為CD或DVD驅動器。 So read the text on screen carefully, and press any key if applicable.因此，閱讀這些文字在屏幕上仔細，並按下任意鍵如適用的話。
8. System will start to load files, and once loading completes, “Install Windows” screen will be displayed.系統將開始加載文件，一旦裝載完成後， “安裝Windows ”屏幕將顯示。 Select and choose appropriate Language to install , Time and currency format , and Keyboard or input method , then click on Next button.選擇並選擇適當的語言來安裝，時間和貨幣格式，鍵盤或輸入法 ，然後點擊下一步按鈕。

   

9. The next screen has options to “Install Now”, learn “What to know before installing Windows”, or “Repair your computer”.在下一個畫面已選擇“現在安裝” ，學習“怎麼知道之前安裝Windows ” ，或“修復計算機” 。 Click on Repair your computer .按一下修復您的計算機。

   

10. “System Recovery Options” will then search for all Windows installations on the system. “系統恢復選項”然後將搜索所有的Windows安裝的系統。 If the system is dual-boot or multi-boot systems with many operating system installed, more than one item would be displayed.如果系統是雙啟動或多啟動系統，許多安裝作業系統，多個項目將被顯示。 However, for most users, there should be only one Windows installation found, Microsoft Windows Vista which is highlighted by default.但是，對於大多數用戶來說，應該只有一個Windows安裝發現， 微軟Windows Vista是突出了默認。 Else, select the installation of OS that you want to recover or access in the Windows RE, and then click on Next button.否則，選擇安裝的操作系統，你要恢復或存取在Windows稀土，然後點擊下一步按鈕。

    

    If you’re hard disk is a SATA (Serial ATA), SATA II or SCSI interface which requires additional driver to Windows RE to recognize the disk, insert the installation media or driver disc for the device, and then click on Load Drivers to select the driver to add the drivers to the recovery session.如果你的硬盤是一個的SATA （串行ATA ） ， SATA II的或SCSI接口需要額外的驅動程序為Windows稀土認識到磁盤，插入安裝媒體或光盤驅動器的裝置，然後按一下負載驅動器選擇司機新增司機恢復會議。

    

11. Windows Vista Recovery Environment, which assumes your computer was unable to start, may automatically start Startup Repair to scan the Windows installation selected to detect any error found and fix any problem found. Windows Vista的修復環境，假定您的計算機無法啟動，可能會自動開始啟動修復掃描Windows安裝選定發現任何錯誤發現和修復發現任何問題。 If you run Windows RE and Start Up Repair before, this scenario may be skipped.如果您運行Windows RE和啟動修復之前，這種情況可能會跳過。

    

    Click on Cancel and then follow by Yes button on the confirmation dialog to terminate and stop the Startup Repair process.點擊取消 ，然後按照所是按鈕的確認對話框，終止和停止啟動修復過程。 After this, “System Recovery Options” which is Windows Recovery Environment will appear.在此之後， “系統恢復選項” ，這是Windows修復環境將會出現。

    

    The rest of the information on this step is for information purpose to describe what will happen if user doesn’t terminate the Startup Repair and let it run its course.其餘的資料，這一步是信息的目的來形容會發生什麼事，如果用戶沒有終止啟動修復並讓它結束。

    If you’re not terminating the Startup Repair, it may offer to restore computer using System Restore to earlier point in time.如果你不終止啟動修復，它可提供恢復使用的計算機系統還原到較早的時間點。 Click on Cancel to skip the restore with System Restore.點擊取消跳過恢復與系統還原。 If you click on OK, system will be automatically restore to previous Restore Point, and it manages to fix any problem ‘assumed’ by Startup Repair, you may not get to Windows Vista Recovery Environment.如果你點擊確定，系統將自動恢復到以前的還原點，並設法解決任何問題， '假定'的啟動修復，您可能無法獲得Windows Vista的修復環境。

    

    When all recovery attempts by Startup Repair fails, it will offer to send information about the problem (curiously, where is the problem?) to Microsoft, click on Don’t send (as you probably don’t have Internet connection too. Then another screen will tell user that Windows cannot repair this computer automatically. Click on Finish button.當所有企圖恢復啟動修復失敗，它會提供發送有關該問題的信息（奇怪的是，那裡的問題？ ）微軟，點擊不發送 （如你可能沒有太多的互聯網連接。然後再屏幕上會告訴使用者， Windows無法修復這台電腦上自動運行。點擊完成按鈕。

    

    

12. The “System Recovery Options” which is Windows RE or previously known as Windows Vista Recovery Console will be displayed.在“系統恢復選項” ，這是可再生能源的Windows或以前稱為Windows Vista的故障恢復控制台會顯示。 The screen offers tools such as Start Up Repair, System Restore, Windows Complete PC Restore, Windows Memory Diagnostic Tool and ability to open a Command Prompt.屏幕提供了工具，如啟動修復，系統還原時， Windows Complete PC還原， Windows內存診斷工具和能力，打開命令提示符。

    

IMPORTANT : You're reading a machine translated page which is provided "as is" without warranty. 重要：您正在閱讀的機器翻譯網頁這是“原樣”提供，無保修。 Unlike human translation, machine translation does not understand the grammar, semantics, syntax, idioms of natural language, thus often produce inaccurate and low quality text which is misleading and incomprehensible.不同人的翻譯，機器翻譯不明白的語法，語義，句法，成語自然語言，因此，往往產生不準確，低質量的文字這是誤導和費解。 Thus, please refer to因此，請參閱 original English article英文原文的文章 when in doubt.當懷疑。

Related Articles相關文章

• Fix Deleted SAM File Causing Windows Vista Unable to Boot Error金泳三修復刪除文件造成的Windows Vista無法啟動錯誤
• System Halt 0xc0000034 Error When Boot Up After Installing Windows Vista SP1系統停止0xc0000034錯誤時開機後，安裝Windows Vista SP1的
• Windows Vista Startup Hang and Boot Failure after SP1 on Corrupt Driver File (atapi.sys and ataport.sys) Windows Vista的啟動和引導杭後失效舞弊SP1的驅動程序文件（的Atapi.sys和ataport.sys ）
• Windows Vista Failed to Start with ntkrnlpa.exe or ntoskrnl.exe 0xc0000428 Error Status Windows Vista的啟動失敗或與ntkrnlpa.exe的Ntoskrnl.exe 0xc0000428錯誤狀態
• Endless Reboot Loop While “Configuring Updates: Stage 3 of 3″ During Vista SP1 Installation無休止的重新啟動環雖然“配置更新：第3階段3 ”在Vista的SP1安裝
• Windows Vista Fails to Boot After Installing SP1 with ntoskrnl.exe 0xc0000098 Error Windows Vista中無法開機後安裝SP1與0xc0000098錯誤的Ntoskrnl.exe
• Fix Logitech QuickCam (Messenger, Chat, Zoom, IM, Express) Not Compatible Driver Issue in Windows Vista SP1羅技快看費克斯（信使，聊天，變焦，即時消息，快速）不兼容的驅動程序問題在Windows Vista SP1的
• How to Use USB or FireWire Portable External Hard Drive to Install Windows Vista Without DVD Drive如何使用USB或FireWire便攜式外部硬盤驅動器安裝Windows Vista沒有DVD驅動器
• Workaround to Run VMWare Server on Windows Vista解決辦法運行VMware服務器在Windows Vista
• Windows Vista SP1 Failed to Install with WU Error Code 800704C8 or 80041315 Windows Vista的SP1的安裝失敗與吳錯誤代碼800704C8或80041315

This entry was posted on Sunday, April 20th, 2008 at 11:54 pm and is filed under 本條目被張貼在週日， 2008年四月二十日在下午11時54分，並提交下 Windows Vista Windows Vista中 . 。 You can follow any responses to this entry through the 您可以按照任何反應，這個項目通過 RSS 2.0 2.0 feed. You can 飼料。您可以 leave a response 留下一個反應 , or 或 trackback 引用 from your own site. 從您自己的網站。