How to Open Windows Vista Recovery Environment (RE) Console from Installation CD如何打开Windows Vista的恢复环境（重新）控制台从安装CD

Installation DVD of安装DVD版 Windows Vista Windows Vista中 contains a new Windows Recovery Environment (aka Windows RE), which completely replaces the recovery console in Windows XP.包含一个新的Windows修复环境（又名的Windows稀土） ，其中完全取代Windows XP的恢复控制台。 Commonly known as Recovery Manager, Windows RE is a recovery platform based on Windows Preinstallation Environment (Windows PE), and supersedes most functions or tasks from recovery console.通常被称为恢复管理器时， Windows可再生能源是一个回收平台基于Windows预安装环境（ Windows PE ） ，并取代大部分职能或任务从故障恢复控制台。 Windows RE provides two main functionalities:稀土的Windows提供了两个主要功能：

1. Automatic diagnosis and repair of boot problems using a tool called Startup Repair.自动诊断和修复的启动问题，使用的工具称为启动修复。
2. A centralized platform for advanced recovery tools such as command prompt and ability to restore to a System Restore points.集中平台，先进的恢复工具，如命令提示符和能力恢复到一个系统还原点。

As mentioned, Windows Recovery Environment or Windows RE is stored on Windows Vista installation setup DVD, and end-users will have to boot up from the DVD to access the Windows RE and Startup Repair.如前所述， Windows修复环境或Windows可再生能源是储存在Windows Vista安装安装DVD和最终用户将不得不启动从DVD存取Windows RE和启动修复。 For users using OEM-made computers, most Windows RE already pre-installed on the hard disk in recovery partition or EISA partition, which is accessible via a function key on system startup.对于用户使用的OEM制造的电脑，大多数Windows稀土已经预先安装在硬盘上的恢复分区或EISA磁碟分割，这是可以通过功能键对系统启动。 In you’re in a corporate with Software Assurance or Volume licensing, Windows RE may be available for network boot via a WDS server.在您在企业与软件保证或批量授权时， Windows可再生能源可用于网络启动通过广域数据服务的服务器。

This guide details the steps with illustrations on how to access and open Windows RE Console using Windows Vista installation DVD.本指南详细的步骤与插图就如何获取和打开Windows稀土控制台使用Windows Vista安装DVD上。

1. Restart the computer, and press a function key (depends on motherboard manufacturer or OEM brand) to go to CMOS’s BIOS configuration.重新启动电脑，并按下功能键（取决于主板制造商或OEM品牌）去的CMOS的BIOS配置。
2. Set the boot device ranking or priority so that the first device to boot will be CD/DVD optical drive.设置开机装置排名或优先事项，以便第一启动设备将的CD / DVD光盘驱动器。
3. Save the CMOS.保存的CMOS 。
4. Shutdown the computer.关闭计算机。
5. Insert the Windows Vista installation DVD into DVD drive disc tray.插入Windows Vista安装DVD到DVD驱动器的光碟托盘。 Windows Anytime Upgrade DVD can be used in the case that user don’t have normal installation DVD. Windows随时升级的DVD可用于用户的情况下，没有正常的安装DVD上。
6. Power on the PC.电源在电脑上。
7. On some system, user requires to press any key to boot from CD or DVD disc drive, even though first boot device has been set to CD or DVD drive.在一些系统，用户需要按任何键启动CD或DVD光盘驱动器，即使第一次开机装置已设定为CD或DVD驱动器。 So read the text on screen carefully, and press any key if applicable.因此，阅读这些文字在屏幕上仔细，并按下任意键如适用的话。
8. System will start to load files, and once loading completes, “Install Windows” screen will be displayed.系统将开始加载文件，一旦装载完成后， “安装Windows ”屏幕将显示。 Select and choose appropriate Language to install , Time and currency format , and Keyboard or input method , then click on Next button.选择并选择适当的语言来安装，时间和货币格式，键盘或输入法 ，然后点击下一步按钮。

   

9. The next screen has options to “Install Now”, learn “What to know before installing Windows”, or “Repair your computer”.在下一个画面已选择“现在安装” ，学习“怎么知道之前安装Windows ” ，或“修复计算机” 。 Click on Repair your computer .按一下修复您的计算机。

   

10. “System Recovery Options” will then search for all Windows installations on the system. “系统恢复选项”然后将搜索所有的Windows安装的系统。 If the system is dual-boot or multi-boot systems with many operating system installed, more than one item would be displayed.如果系统是双启动或多启动系统，许多安装作业系统，多个项目将被显示。 However, for most users, there should be only one Windows installation found, Microsoft Windows Vista which is highlighted by default.但是，对于大多数用户来说，应该只有一个Windows安装发现， 微软Windows Vista是突出了默认。 Else, select the installation of OS that you want to recover or access in the Windows RE, and then click on Next button.否则，选择安装的操作系统，你要恢复或存取在Windows稀土，然后点击下一步按钮。

    

    If you’re hard disk is a SATA (Serial ATA), SATA II or SCSI interface which requires additional driver to Windows RE to recognize the disk, insert the installation media or driver disc for the device, and then click on Load Drivers to select the driver to add the drivers to the recovery session.如果你的硬盘是一个的SATA （串行ATA ） ， SATA II的或SCSI接口需要额外的驱动程序为Windows稀土认识到磁盘，插入安装媒体或光盘驱动器的装置，然后按一下负载驱动器选择司机新增司机恢复会议。

    

11. Windows Vista Recovery Environment, which assumes your computer was unable to start, may automatically start Startup Repair to scan the Windows installation selected to detect any error found and fix any problem found. Windows Vista的修复环境，假定您的计算机无法启动，可能会自动开始启动修复扫描Windows安装选定发现任何错误发现和修复发现任何问题。 If you run Windows RE and Start Up Repair before, this scenario may be skipped.如果您运行Windows RE和启动修复之前，这种情况可能会跳过。

    

    Click on Cancel and then follow by Yes button on the confirmation dialog to terminate and stop the Startup Repair process.点击取消 ，然后按照所是按钮的确认对话框，终止和停止启动修复过程。 After this, “System Recovery Options” which is Windows Recovery Environment will appear.在此之后， “系统恢复选项” ，这是Windows修复环境将会出现。

    

    The rest of the information on this step is for information purpose to describe what will happen if user doesn’t terminate the Startup Repair and let it run its course.其余的资料，这一步是信息的目的来形容会发生什么事，如果用户没有终止启动修复并让它结束。

    If you’re not terminating the Startup Repair, it may offer to restore computer using System Restore to earlier point in time.如果你不终止启动修复，它可提供恢复使用的计算机系统还原到较早的时间点。 Click on Cancel to skip the restore with System Restore.点击取消跳过恢复与系统还原。 If you click on OK, system will be automatically restore to previous Restore Point, and it manages to fix any problem ‘assumed’ by Startup Repair, you may not get to Windows Vista Recovery Environment.如果你点击确定，系统将自动恢复到以前的还原点，并设法解决任何问题， '假定'的启动修复，您可能无法获得Windows Vista的修复环境。

    

    When all recovery attempts by Startup Repair fails, it will offer to send information about the problem (curiously, where is the problem?) to Microsoft, click on Don’t send (as you probably don’t have Internet connection too. Then another screen will tell user that Windows cannot repair this computer automatically. Click on Finish button.当所有企图恢复启动修复失败，它会提供发送有关该问题的信息（奇怪的是，那里的问题？ ）微软，点击不发送 （如你可能没有太多的互联网连接。然后再屏幕上会告诉使用者， Windows无法修复这台电脑上自动运行。点击完成按钮。

    

    

12. The “System Recovery Options” which is Windows RE or previously known as Windows Vista Recovery Console will be displayed.在“系统恢复选项” ，这是可再生能源的Windows或以前称为Windows Vista的故障恢复控制台会显示。 The screen offers tools such as Start Up Repair, System Restore, Windows Complete PC Restore, Windows Memory Diagnostic Tool and ability to open a Command Prompt.屏幕提供了工具，如启动修复，系统还原时， Windows Complete PC还原， Windows内存诊断工具和能力，打开命令提示符。

    

IMPORTANT : You're reading a machine translated page which is provided "as is" without warranty. 重要：您正在阅读的机器翻译网页这是“原样”提供，无保修。 Unlike human translation, machine translation does not understand the grammar, semantics, syntax, idioms of natural language, thus often produce inaccurate and low quality text which is misleading and incomprehensible.不同人的翻译，机器翻译不明白的语法，语义，句法，成语自然语言，因此，往往产生不准确，低质量的文字这是误导和费解。 Thus, please refer to因此，请参阅 original English article英文原文的文章 when in doubt.当怀疑。

Related Articles相关文章

• Fix Deleted SAM File Causing Windows Vista Unable to Boot Error金泳三修复删除文件造成的Windows Vista无法启动错误
• System Halt 0xc0000034 Error When Boot Up After Installing Windows Vista SP1系统停止0xc0000034错误时开机后，安装Windows Vista SP1的
• Windows Vista Startup Hang and Boot Failure after SP1 on Corrupt Driver File (atapi.sys and ataport.sys) Windows Vista的启动和引导杭后失效舞弊SP1的驱动程序文件（的Atapi.sys和ataport.sys ）
• Windows Vista Failed to Start with ntkrnlpa.exe or ntoskrnl.exe 0xc0000428 Error Status Windows Vista的启动失败或与ntkrnlpa.exe的Ntoskrnl.exe 0xc0000428错误状态
• Endless Reboot Loop While “Configuring Updates: Stage 3 of 3″ During Vista SP1 Installation无休止的重新启动环虽然“配置更新：第3阶段3 ”在Vista的SP1安装
• Windows Vista Fails to Boot After Installing SP1 with ntoskrnl.exe 0xc0000098 Error Windows Vista中无法开机后安装SP1与0xc0000098错误的Ntoskrnl.exe
• Fix Logitech QuickCam (Messenger, Chat, Zoom, IM, Express) Not Compatible Driver Issue in Windows Vista SP1罗技快看费克斯（信使，聊天，变焦，即时消息，快速）不兼容的驱动程序问题在Windows Vista SP1的
• How to Use USB or FireWire Portable External Hard Drive to Install Windows Vista Without DVD Drive如何使用USB或FireWire便携式外部硬盘驱动器安装Windows Vista没有DVD驱动器
• Workaround to Run VMWare Server on Windows Vista解决办法运行VMware服务器在Windows Vista
• Windows Vista SP1 Failed to Install with WU Error Code 800704C8 or 80041315 Windows Vista的SP1的安装失败与吴错误代码800704C8或80041315

This entry was posted on Sunday, April 20th, 2008 at 11:54 pm and is filed under 本条目被张贴在周日， 2008年四月二十日在下午11时54分，并提交下 Windows Vista Windows Vista中 . 。 You can follow any responses to this entry through the 您可以按照任何反应，这个项目通过 RSS 2.0 2.0 feed. You can 饲料。您可以 leave a response 留下一个反应 , or 或 trackback 引用 from your own site. 从您自己的网站。