How to Enable, Use and Support 4GB or More Physical RAM Memory in 32-bit Windows Vista
Theoretically, x86 and x86-64 processors can support more than 4 GB (gigabytes) of physical memory (RAM) in 32-bit systems, such as in the case of 32-bit Windows Vista operating system. With increasingly affordable and cheap RAM memory module, PC with 4GB or even 8GB of RAM memory sticks. However, to many disappointment, 32-bit (x86) edition of Windows Vista can only ’see’ and support a maximum of 4GB RAM memory.
Worse still, x86 Windows Vista computer with physical memory that bigger or more than 4GB may has memory address space (usable RAM) of only 2 to 3.8 GB (typically 3.12 GB) available to the operating system (Windows Vista SP1 does not change the usage behavior as KB946003 confirms that it’s just reporting change that correct the way Windows Vista reports amount of RAM installed), as operating system reserves some physical address space as I/O regions for memory mapped peripherals and devices. These memory-mapped I/O (MMIO) must be mapped in the first 4 GB of memory address space. So if 4 GB of system memory is already installed, part of the 4GB address space must be overwritten and reserved as MMIO, effectively reducing the total amount of system memory available. For example, video graphic card with on-board memory of 256 MB will take up 256MB memory address space, reducing the 4GB of memory to 3.75GB literally.
However, maximum memory limit for 32-bit Windows Vista is not a hardware or architecture limitation. In fact, Physical Address Extension (PAE) feature has been added to x86 and x86-64 processors (since Intel Pentium Pro and AMD Athlon or newer models) to allow more than 4 gigabytes (GB) of physical memory to be used in 32-bit systems, given appropriate operating system support. However, out of commercial or marketing decision, Microsoft decides to enforce maximum physical memory limit support for 32-bit Windows Vista to 4 GB, with or without PAE mode enabled (Windows Vista enables PAE by default as it’s required for hardware DEP / NX).
Microsoft advises all Windows Vista system that wants to use all 4GB or more physical memory fully to install 64-bit (x64) Windows Vista. However, in view of lack of support and compatibility issues for many drivers, applications and programs that haven’t been ported to 64-bit code base, this upgrade option is probably not prefer by many user, especially novice or generalize customers.
Chinese hacker has managed to crack the maximum memory limit imposed by Microsoft on 32-bit Windows Vista. The trick is to transfer or transplant the more memory support feature in 32-bit Windows Server 2008 to Windows Vista, which use similar kernel code. Windows Server 2008 Enterprise or Datacenter x86 edition supports up to 64GB of physical memory, a far higher limit comparing with paltry 4GB limit imposed on x86 Windows Vista.
To perform the hack to enable the support for more than 4GB of memory in 32-bit Windows Vista, follow these steps:
- Download and install 32-bit Windows Server 2008 Enterprise Edition, and activate the installed operating system.
If you can’t install Windows Server 2008 Enterprise Edition, or has no way to perform product activation on Windows Server 2008 or lack of product key, you can download and use the copy of required files extracted from activated Windows Server 2008 system, posted below.
- Copy the following files from Windows Server 2008 to a removable drive:
%systemdrive%\Windows\System32\licensing\pkeyconfig\pkeyconfig.xrm-ms
%systemdrive%\Windows\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareLicensing\tokens.dat - In Windows Vista, backup the same two files in the same paths for future recovery or restore purpose by copying the files as another copy, to other location or simply renaming the files:
%systemdrive%\Windows\System32\licensing\pkeyconfig\pkeyconfig.xrm-ms
%systemdrive%\Windows\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareLicensing\tokens.dat - In Windows Vista, run Services (in Start Search), and stop the Software Licensing service.
- Take ownership and grant full control permissions to logged on user account or Administrators user group for the 2 files:
%systemdrive%\Windows\System32\licensing\pkeyconfig\pkeyconfig.xrm-ms
%systemdrive%\Windows\ServiceProfiles\NetworkService\AppData\Roaming\Microsoft\SoftwareLicensing\tokens.dat - Replace and overwrite the Windows Vista version of pkeyconfig.xrm-ms and tokens.dat with the version copied from Windows Server 2008.
- Restart the computer.
- Voila, all installed RAM including large amount of 4 GB or more is now usable by 32-bit Windows Vista.
Download server2008_pkeytokens.rar with 2 Windows Server 2008 Enterprise Edition files, namely tokens.dat and pkeyconfig.xrm-ms to skip the step to install and activate Windows Server 2008.
Replacing the pkeyconfig.xrm-ms and tokens.dat should not affect daily usage and functionality of Windows Vista. There may be minor problem such as there is no more Windows Experience Index rating shown, and unable to access “Computer Management” by “Manage” on Computer’s right click menu. On some system, there may be activation issue (such as require to activate Windows Vista again) after replacing the files with the copy from Windows Server 2008. In the case, activate Windows Vista with a product key for Windows Server 2008.
Note that some forums and blogs have instructed readers to run “BCDEdit /set PAE forceenable” command to enable and turn on PAE in Windows Vista. This is incorrect, as PAE is always enabled in Windows Vista together with DEP, and verifiable via Everest. The 4GB limit in 32-bit Windows Vista is simply a software-implemented limitation.
Related Articles
- How to Enable PAE on 32-bit Windows Vista for 4 GB or More Memory
- How to Enable PAE in x86 32-bit Windows Server 2003 and 2000 to Use Large 4GB or More RAM Memory
- Enable Lock Pages in Memory to Prevent Database Paging to Disk
- Windows Vista Starter Edition Supports More Than 1GB Memory (Tested on 2 GB System)
- Windows Cannot Hibernate Computer with More Than 4 GB Memory
- How to Get Free Support and Help from Microsoft for Installing Windows Vista SP1 Problems
- How to Install and Enable Tablet PC Optional Components in Windows Vista
- Enable and Use Handwriting Recognition Input Method in Windows Vista
- ReadyBoost Not Working or USB Flash Key Stick Not Support or Enabled In Windows Vista SP1
- Test Memory On Computer for Errors with Windows Memory Diagnostic RAM Tester
Entries (RSS)
October 23rd, 2009 09:54
You’re all being fooled!
The only thing that this hack can do is to screw up your activations and Vista itself!
August 29th, 2009 07:10
I had alot of problems but I spent 2 days on it and figured out how to fix it.
**My problem was, everytime I changed the files I got the unauthorized change made error and had to reactivate and it wouldnt take my ultimate vista key (genuine from retail) nor would it take my server 2008 enterprise key.
FIX:
My vista was sp1 and server 2008 files were from sp2 version. I installed sp2 on my vista and now it works 100%.
August 28th, 2009 15:35
[...] leave a comment » I HAVE NOT tried this, but I am interested… http://www.tipandtrick.net/2008/how-to-enable-use-and-support-4gb-or-more-physical-ram-memory-in-32-... [...]
August 2nd, 2009 17:39
To activate windows over the phone, use the command SLUI 4 in command prompt with administrator rights.
June 16th, 2009 23:44
Will this also work with Windows 7?
June 16th, 2009 20:04
it works, after activating with 2k8 serial number and restarting.
May 19th, 2009 16:55
[...] 4GB and above. However it does NOT work. In my opinion the only solution to do that is here: How to Enable, Use and Support 4GB or More Physical RAM Memory in 32-bit Windows Vista Tip and Trick [...]
April 6th, 2009 20:58
Not work for me, Vista Ultimate SP2
March 26th, 2009 09:21
The trick works, thanx. Nice post
March 17th, 2009 18:32
help please!
March 15th, 2009 23:46
Rusell I also did the restoring of the recovery point (to yesterday) and then I entered in safe mode, restore the backup files and no result, still says that is not a genuine copy
March 15th, 2009 23:03
I own a MSDNAA license of Windows server 2008 and a License of Windows Vista both 32 bits.
I did sucessfully all the steps you mention, just in the final step after the reboot I introduced key of Vista in spite of 2008. Since then all the time my vista says that my windows is not activated and I can’t activate it by internet, it redirects me to microsoft web to purchase a lisence. I restored the backups and rebooted trying to use my original serial and it didn’t work. I aquired a new key of a new windows vista as I can with the MSDNAA and it didn’t worked also, I also tried to activate Vista with activators found in internet. There is no way. I am very angry. to gain just 1 GB more or ram I have now the annoying unactivation.
Please some help if it’s possible. I am experienced with computers
March 15th, 2009 00:13
Windows vista is a memory specification that will be great but I prefer to use windows Xp SP2 and I use a vista skin for desktop display with only 512mb. I use the vista look in my desktop
March 2nd, 2009 02:16
Some folks out there that may not be as power user savvy as they may think should REALLY think twice about doing this hack. I thought I was up to the challenge and found that Vista decided it wanted a new/original product key and then proceeded to completely lock me out of the system. The warning about this occurring is NOT mentioned quite sternly enough, nor is there additional instructions on how to get you out of this situation. I’m not completely ignorant about computing, but my research turned up little with regards to this hack and any additional information on its proper execution. So be warned, you may find yourself having to do a reinstall and additional research on how to do this hack without probable additional headaches.
If the need to put the originals (pkey and token) back is needed, go into safe mode and replace the hack files back into their perspective folders. This may allow you to go back to square one (no harm, no foul). But if you try to circumvent the newer pkey and token like I did, you’ll be locked out of safe mode as well, with no fix. At least I came at this with ONE solution, albeit not what folks may want to hear.
Good luck.
February 21st, 2009 23:04
Okay, seriously people: QUIT LEAVING COMMENTS IN YOUR NATIVE LANGUAGE THAT IS OTHER THAN ENGLISH!!!
Obviously you understand ENGLISH if you’re READING THIS ARTICLE… NOT VERY MANY OF THE REST OF US CAN UNDERSTAND YOUR COMMENT BECAUSE MOST OF US *JUST* SPEAK ENGLISH!
So just STOP IT! Knock it the heck off already! Either don’t leave ANYTHING, or LEAVE IT IN ENGLISH!
February 18th, 2009 13:51
Anyone using this more than a day / a month or a year ? Is it stable and will it cause wierd errors or whatsoever?
January 7th, 2009 09:59
Yep, got 8GB, all great but the “Windows Vista with a product key for Windows Server 2008″ part. I have to buy the Server 2008 license too?!
I don’t know if activation has something to do but Media Center didn’t want to run…
Microsoft, please stop releasing 32bit versions of Windows! do as you did with Windows 95, it was only 32bit versions. Not a Win95 16Bit and Win95 32bit.
November 15th, 2008 03:46
If I owned a copy of Windows Server 2008 Enterprise, why would I be doing this in the first place? I guess its an interesting exercise, but hardly practical. Now, if someone could come up with a hack that would work with Vista keys, then you’d have something.
November 9th, 2008 01:41
i dont think this trick would work on XP. only vistas.
November 6th, 2008 11:03
So how do we do this with XP???
November 6th, 2008 00:36
yes it works but after 60 days you need to activate it or rearm (im not sure for how many times). mine i totally removed SL service and keep my vista in non-activated state for as long as i want.
November 4th, 2008 19:52
Using that patch disables much of the media functionality of Vista Ultimate / Home Premium and needs a reactivation (with a valid Windows Server 2008 Enterprise serial) on OEM systems even with the files found in “server2008_pkeytokens.rar”. If you don’t have a valid serial for W2k8 Enterprise or wish to retain Media Center functionality, I’d suggest using 64-bit Vista Ultimate (or Home Premium) instead.
November 1st, 2008 13:47
The trick works. You have to follow the steps mentioned in the article. I have 8G, before the change I only see 3G, after I see 7G. Because 32bit 2008 server only support up to 8G, and 1G will be used by OS, so seeing 7G is perfect fine.
One key step is that after replacing the tokens file, you have to reboot. When the machine up again, it will ask the key, enter the key of the server version, then let the activation go through. If activation did go through, the token file from 32 bit server will be overwritten by 32 bit vista, and for sure you won’t see any memory change.
Once I passed that point, I got what I need. I have no problem with the getting property by right clicking my computer. The only thing so far not working as mentioned in the article is the getting the manage screen by right clicking my computer. I’m happy about the result.
July 9th, 2008 21:47
Realizei o procedimento e o windows continua sem identificar os meus 4gb de ram e nao consigo mais acessar as propiedades do sistema.
June 1st, 2008 01:35
[...] XP. Most 32-bit client based Windows operating system, such as Windows XP and Windows Vista (see way to use large memory of more than 4GB in 32-bit Windows Vista), has OS level limit that restricts the maximum amount of memory able to be used to [...]
May 27th, 2008 23:15
dan con you contact me via PM ?
May 27th, 2008 16:03
[...] Via | Tip and Trick [...]
May 26th, 2008 20:08
if i had a winserv08 valid serial…
it worked!
May 26th, 2008 15:38
personalize menu doesn’t work too…..it’s a disaster!!!!
May 26th, 2008 15:20
however i tried this guide and the response is not so good…i think now 4gb are enabled but…computer->proprieties doesn’t work…windows update doesn’t open….control panel doesn’t open….how could i fix all this?
May 26th, 2008 15:02
[...]after replacing the files with the copy from Windows Server 2008. In the case, activate Windows Vista with a product key for Windows Server 2008.[...]
ok. but than i should consider my OS as Vista or WS08? which will be my upgrades in winUp ?
May 26th, 2008 11:46
[...] How to Enable, Use and Support 4GB or More Physical RAM Memory in 32-bit Windows Vista [...]
May 26th, 2008 04:45
I replaced only the tokens.dat file but it still does not work. I still have 3.3GB out of 4GB. The Properties page not does work either. I guess I may just have to wait for a proper activation method for Windows 2008 32-bit and then configure/convert it to Windows Ultimate.
May 26th, 2008 02:43
It does say Vista on the properties page, but I did indeed get notified by WU that there was a 2008 server update I needed. There are some other things I discovered last night which caused me to switch back. I noticed the snipping tool no longer worked. Also, I could not access Add/Remove Windows components from Programs and Features in the control panel. So – now I’m back to 3581 RAM, just like before – hopefully someone will come up with a better hack someday!
May 25th, 2008 15:00
dan you tried that method on vista? if yes, i think if you look at computer -> proprieties and there you see “Windows Vista”… i think windows update will send you vista upgrade… am i wrong? or am i stupid?
May 25th, 2008 13:07
http://windowsserver2008.dyndns.org/activation.asp
(click bypass link)
OK, right before I gave up, I tried the above procedure. Seems to work, but yeah I feel pretty dirty just trying to get my 4gb! The only thing that bothers me still is I’m worried I won’t get any Vista updates, only 2008 ones – time will tell. And yes, you only need to replace tokens.dat to get this to work.
May 25th, 2008 12:32
Yeah, no matter what, you cannot activate 2008. I even tried downloading a KMS server VMWare to no avail. All the hacks for Server 2008 involve replacing tokens.dat with a Vista version! So this really can’t be viable longterm.
May 24th, 2008 15:59
so there isn’t yet a good solution if ws08’s crack still doesn’t work 1oo% !
May 24th, 2008 13:36
Try to replace just tokens.dat instead of both 2 files, and see if some problems fade away.
You have to use activation crack for Windows Server 2008 if still got problem.
May 24th, 2008 06:56
I have Windows Vista 32 bit installed. It runs on top of the grub bios emulator. Fully activated, updates running, etc. I booted with a Vista PE USB drive, rename the files and then copied the one you posted above. Still, my Vista reads 3.4 GB RAM. I have 4 GB RAM installed.
Why isn’t this hack working for me?
Also Computer->right click->Manage works. What does not work for me is Computer->right click->properties.
Is this a joke or can anybody verify that this actually works. I hope is is not some form of virus or spyware.
May 24th, 2008 01:37
… and by “working happily”, I mean that I see all of my 4gb in Task manager. (Ever since SP1, I’ve seen it reflected on the system properties page) Also, the above mentioned aberrations are present. I cannot go to computer management by right clicking and selecting manage. When I reboot, I am asked to provide a reason, just like a server o/s. Most importantly, folks, is I got a critical 2008 server update from Windows Update this morning. I’m guessing you do NOT want to install these, and if you are doing so automatically, you are in for trouble. Just a guess.
So, whoever wrote this article – what can I do about the activation problem??
May 24th, 2008 01:05
OK, I have had moderate success with this after following the directions, but the activation thing is disturbing me. Of course MS now wants a server 2008 enterprise product key, (after using the files provided) and why would I have one of those? I just want to use all of my 4GB. So while it’s working happily right now, soon I’ll have to revert back.
May 24th, 2008 00:47
Theoretically language won’t care. But you have to try it up.
May 24th, 2008 00:05
hi guys…this is my first message here!
fantastic website
about this topic…i got an italian version of vista…shall i use italian version of server08 ’s files ? and what about ” activate vista as windows server 2008 ” as “admin” says !?
p.s. sry 4 my english…it’s very bad i know
May 23rd, 2008 23:13
You have to use Windows Server 2008 activation method after replacing the 2 files. These 2 files is activation related.
May 23rd, 2008 22:51
I, too, had issues with this solution. I was unable to re-key my license after the reboot (using OEM loader).
May 23rd, 2008 22:34
Are you using same language editions of the files?
May 23rd, 2008 19:30
My system (Ultimate SP1 x86) crashed after replacing the system files with the ones downloaded from the link. After reboot I got kind of
“Licencig service could not start, Check for a
solution and restart the program/restart the program” looping error message.
The only resscue was reset>safe mode with command prompt> rstrui.
Could any of you get it work?
May 23rd, 2008 16:33
download link have problem with firefox
try download from opera or download that from here
files + info
http://rapidshare.com/files/116960882/server2008_pkeytokens.rar
May 23rd, 2008 16:24
wow!
what about 64 bit processing? doesn’t work on win32 anyway!
May 23rd, 2008 16:22
The download link for server2008_pkeytokens.rar does NOT WORK. It says “Your request url not found” after submit a correct verification code.
May 23rd, 2008 15:45
[...] 32-Bit mehr als 4GB Ram How to Enable, Use and Support 4GB or More Physical RAM Memory in 32-bit Windows Vista Tip and Trick [...]