一刹那升級Eten Glofiish窗口移動設備ROM固件OS從SD存儲卡(固定RAPIcopyfile或更新錯誤在景色)

窗口景色，窗口移動設備中心和WM基於口袋個人計算機電話是所有產品從或與微軟相關，但不幸地綜合化在他們之間不容易地是，并且有大量兼容性錯誤在他們之間。 當用戶跑在窗口景色包含ROM更新公共事業和ROM圖像通過窗口流動Devicve中心的Eten Glofiish ROM圖像更新軟件時(WMDC)閃動更新固件OS軟件在USB連接， ROM升級閃動的過程發生故障和不簡單地運作。

而設備LCD屏幕顯示展示USB下載者準備好和USB連接的，然後等待的下載，但下載不接受， ROM更新公共事業不可能轉移ROM圖像更新的新版本到窗口移動設備。 它也是可能的USB用USB主人沒有連接，錯誤信息沒有連接。 然後， Eten Glofiish ROM OS updater將提示各種各樣的錯誤信息認為升級出故障，沒連接的USB，無法轉移固件OS圖像、RAPIcopyfile錯誤和等。

錯誤影響幾乎Eten Glofiish窗口流動(口袋個人計算機電話)設備，例如M500， M800、M810、X500、X510、X600、X800和等所有模型。 不要能否則無法閃動升級ROM固件OS問題影響仅窗口景色操作系統。 作為修理和解決問題和成功地升級Eten Glofiish WM電話的解決方法到固件的最新的版本，用戶在ROM可進行一刹那升級固件OS軟件通過使用存儲卡(SD、MicroSD、MiniSD、SDMMC和等)使用如下做法。 把戲為想要更新Eten Glofiish設備，无需使用計算機的用戶也運作。

1. 下載ROM圖像OS軟件更新設定安置者的最新的版本從 Eten支持下載頁 (需要的註冊和註冊)。
2. 準備一個存儲卡適合入Eten Glofiish移動設備)的(類型，并且有在512 KB和1 MB之間的大小。 格式化存儲卡 肥胖 文件系統(FAT32不是可接受的)，和保證閃存卡片是 空 沒有其他文件或文件夾。
3. 在個人計算機，跑安置者(.exe) ROM圖像更新，无需塞住或連接Eten Glofiish移動設備到計算機通過USB纜繩和微軟WMDC (ActiceSync)。
4. After the installation, on reaching the ROM image updater welcome greeting screen where End User Update (EUU) window title and Welcome to Device Software Update Utility is shown. Leave the window or dialog opens.
5. Open Windows Explorer, and navigate to the following folder:

   C:\Documents and Settings\<user name>\Local Settings\Temp

   Note: It’s easier if you clear out and delete everything inside the Temp folder before running the Firmware Updater setup program.

6. Search and locate the following 2 files inside the Temp folder:

   temp.dat (about 60 MB)
   USBDLUpdate_Console.exe (about 4KB)

7. Insert the memory card into a card reader linked to the computer.
8. Copy the two files (temp.dat and USBDLUpdate_Console.exe) into the blank memory card in root directory.
9. Rename the file extension for temp.dat to temp.bin (or any name ending in .bin extension).

   Note: You may need to uncheck “Hide extensions for known files types” option in the “Folder Options” under “Tools” menu to see the .dat extension in order to rename it.

10. Connect the Eten device to AC power adapter for charging to ensure that power supply is consistent to safeguard against and avoid ROM firmware update failure due to insufficient battery power on the mobile device.
11. Slot in the memory card into the Eten Glofiish mobile device.
12. Ensure that the device is not connected to desktop or laptop computer via ActiceSync or Windows Mobile Device Center with USB cable.
13. In the Eten Glofiish Windows Mobile device, run File Explorer.
14. Navigate to the SD memory card folder, i.e. \SDMMC.
15. Click on USBDLUpdate_Console.exe to start the soft boot loader to trigger Bootloader mode.
16. The soft bootloader will load bootcode in RAM, jumps to the bootcode and then kills Windows Mobile operating system. Finally the LCD screen will reset and turn into the console mode.

    Alternative method: If soft bootloader method above doesn’t work, set the Eten Glofiish mobile device into Bootloader mode by pressing and holding Power and Voice Commander buttons simultaneously, and then press the Reset button. Remove the stylus but don’t release and continue to hold the Power and Voice Command buttons. The device should starts in Bootloader mode.

    Note: If “Find SDMMC Card” or “SDMMC Load Fail” error message is been shown on the device’s LCD, the SD memory card is probably not compatible with the Eten device. Try another SD card or try to reformat the SD card again with FAT filesystem and repeat the process.

17. The ROM firmware OS software update should begin automatically and the device will be flashed with the ROM on the MicroSD-card. The screen will show some text as below:
    

    USB Downloader 0021
    Flash Capacity=256MB

    USB Downloader Ready.
    SD Card In
    Find SDMMC Card.
    File= temp BIN
    Program Image from SDMMC
    update usb downloader
    please waiting.

    The update will take a slightly longer time when comparing to the usual ROM update via ActiveSync or WMDC with USB cable connected between Eten device and desktop or notebook computer, due to the slower data loading transfer rate and speed from SD card to Eten device. The whole process may takes 20 to 30 minutes

18. The update process complete when the message of USB host is not connected yet is shown on LCD screen. At this point, soft-reset the Windows Mobile device, and the new version of ROM OS software is successfully installed.

IMPORTANT: You're reading a machine translated page which is provided "as is" without warranty. Unlike human translation, machine translation does not understand the grammar, semantics, syntax, idioms of natural language, thus often produce inaccurate and low quality text which is misleading and incomprehensible. Thus, please refer to original English article when in doubt.

Related Articles

• Download Softick Card Export II Trial to Emulate Windows Mobile as Portable Hard Disk
• USB Unknown Device Drive Issue, Not Working, Recognized or Connected Error After Upgrading and Installing Vista SP1
• Error Code 0×80070002 During Windows Vista SP1 Setup Install
• ReadyBoost Not Working or USB Flash Key Stick Not Support or Enabled In Windows Vista SP1
• Updated PS3 Firmware 2.35
• Update or Upgrade to Zune 2.5 for Much Wanted Features (Direct Download Link)
• Windows Vista Failed to Start with ntkrnlpa.exe or ntoskrnl.exe 0xc0000428 Error Status
• Fix USB Issues in Windows Vista with KB941600 Cumulative Updates for USB Core Components
• Windows Mobile Device Cannot Connect (or Quickly Disconnect or Drop) and Not Sync with Vista WMDC (ActiveSync)
• Windows Vista Cannot Auto Find Driver for New USB Device Plugged In

This entry was posted on Friday, May 23rd, 2008 at 11:44 pm and is filed under Application for Mobile Devices, Tips & Tricks. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.