Flash Upgrade Eten Glofiish Windows Mobile Device ROM Firmware OS from SD Memory Card (Fix RAPIcopyfile or Update Error in Vista) Flash Upgrade eTEN Glofiish Windows Mobile Device ROM firmware OS no SD Memory Card (Fix RAPIcopyfile vai Update Kļūda Vista)

Windows Vista, Windows Mobile Device Center and WM based Pocket PC Phone are all products from or related to Microsoft, but unfortunately integration between them is not with ease and there are plenty of compatibility error between them. Windows Vista, Windows Mobile Device Center un WM balstās Pocket PC Phone ir visi produkti, no vai ir saistīti ar Microsoft, bet, diemžēl, integrāciju starp viņiem nav viegli, un ir daudz kļūdu saderību starp tiem. When user run the Eten Glofiish ROM image update software which contains the ROM Update Utility and ROM image to flash update the firmware OS software via Windows Mobile Devicve Center (WMDC) on USB connection in Windows Vista, the ROM upgrade flashing process fails and simply doesn't work. Kad lietotājs palaist eTEN Glofiish ROM image atjaunināt programmatūru, kas satur ROM Update Komunālie un ROM image mirgot atjaunināt firmware OS programmatūru ar Windows Mobile Devicve Center (WMDC) par USB savienojumu Windows Vista, kas ROM jauninājums mirgojošai neizdodas un vienkārši doesn 't darbu.

The ROM Update Utility cannot transfer the new version of ROM image update to the Windows Mobile device, while the device LCD screen display shows USB Downloader Ready and USB connected, and then waiting for download, but no download is ever receiving. Par ROM Update Utility nevar nodot jauno versiju ROM image atjauninājums Windows Mobile ierīci, kamēr ierīce LCD ekrāna displejs rāda USB Downloader Ready un USB savienotas, un tad gaida lejuplādēt, bet ne lejupielāde ir kādreiz saņem. It's also possible that USB is not connected with USB Host is not connected yet error message. Tas ir arī iespējams, ka USB nav savienots ar USB Host nav saistīta vēl kļūdas ziņojums. Then, the Eten Glofiish ROM OS updater will prompt various error message saying upgrading fails, USB not connected, unable to transfer the firmware OS image, RAPIcopyfile error and etc. Tad, eTEN Glofiish ROM OS Updater liks dažādas kļūdas paziņojumu, sakot, pārkārtošanās neizdodas, USB nav savienotas, nevar nodot firmware OS attēlu, RAPIcopyfile kļūda uc

The error affects almost all models of Eten Glofiish Windows Mobile (Pocket PC Phone) devices, such as M500, M800, M810, X500, X510, X600, X800 and etc. The cannot or unable to flash upgrade the ROM firmware OS problem affects only Windows Vista operating system. Kļūda ietekmē gandrīz visu modeļu eTEN Glofiish Windows Mobile (Pocket PC Phone) ierīces, kā, piemēram, M500, M800, M810, X500, X510, X600, X800, un utt, nevar vai nespēj flash uzlabot ROM firmware OS problēma skar tikai Windows Vista operētājsistēmu. As a workaround to fix and resolve the issue, and to successfully upgrade the Eten Glofiish WM phone to latest version of firmware, user can perform the flash upgrading of firmware OS software in the ROM by using a memory card (SD, MicroSD, MiniSD, SDMMC and etc) using procedure below. Kā PROFILAKSE noteikt un risināt šo jautājumu, un, lai sekmīgi modernizēt eTEN Glofiish WM tālrunis ar jaunāko versiju no firmware, lietotājs var veikt flash uzlabošana firmware OS programmatūru, kas ROM, izmantojot atmiņas karti (SD, MicroSD, MiniSD, SDMMC un ETC), izmantojot procedūru, turpmāk. The trick also work for user who wants to update the Eten Glofiish device without using computer. Par triks arī strādāt lietotājs, kurš vēlas, lai atjauninātu eTEN Glofiish ierīci, neizmantojot datoru.

1. Download the latest version of ROM image OS software update setup installer from Lejupielādēt jaunāko versiju ROM image OS programmatūras atjauninājumu setup uzstādītāji no Eten Support download page ETEN atbalsta Download Page (Registration and login required). (Reģistrācijas un nepieciešama pieteikšanās).
2. Prepare a memory card (of the type that fits into the Eten Glofiish mobile device), and has the size of between 512 KB and 1 MB. Sagatavot atmiņas kartes (no veida, kas iekļaujas eTEN Glofiish mobilo ierīci), un tā lielums ir no 512 KB un 1 MB. Format the memory card as FAT file system (FAT32 is not acceptable), and ensure that the Flash memory card is empty without any other file or folder. Formatētu atmiņas karti, kā FAT failu sistēma (FAT32 nav pieņemama), un nodrošināt, ka Flash atmiņas karte ir tukšs bez citām failu vai mapi.
3. In the PC, run the installer (.exe) of the ROM image update without plugging in or connecting the Eten Glofiish mobile device to the computer through USB cable and Microsoft WMDC (ActiceSync). Tā kā PC, vadīt uzstādītājs (. Exe) no ROM image update bez tapām vai savieno eTEN Glofiish mobilo ierīci ar datoru, izmantojot USB kabeli un Microsoft WMDC (ActiceSync).
4. After the installation, on reaching the ROM image updater welcome greeting screen where End User Update (EUU) window title and Welcome to Device Software Update Utility is shown. Leave the window or dialog opens. Atstājiet loga vai dialoglodzi atver.
5. Open Windows Explorer, and navigate to the following folder: Atveriet Windows Explorer, un aizbīdiet uz šo mapi:

   C:\Documents and Settings\<user name>\Local Settings\Temp C: \ Documents and Settings \ <user nosaukums> \ Local Settings \ Temp

   Note: It's easier if you clear out and delete everything inside the Temp folder before running the Firmware Updater setup program. Piezīme: Tas ir vieglāk, ja jūs izputināt un dzēst viss iekšpusē Temp folder pirms darbinot firmware Updater setup program.

6. Search and locate the following 2 files inside the Temp folder: Meklēt un atrast pēc 2 faili iekšpusē Temp mapi:

   temp.dat (about 60 MB) temp.dat (aptuveni 60 MB)
   USBDLUpdate_Console.exe (about 4KB) USBDLUpdate_Console.exe (aptuveni 4KB)

7. Insert the memory card into a card reader linked to the computer. Ievietojiet atmiņas karti kartes lasītājs saistīts ar datoru.
8. Copy the two files (temp.dat and USBDLUpdate_Console.exe) into the blank memory card in root directory. Nokopējiet divi faili (temp.dat un USBDLUpdate_Console.exe) par tukšu atmiņas karti saknes direktorijā.
9. Rename the file extension for temp.dat to temp.bin (or any name ending in .bin extension). Pārdēvēt failu pagarināt temp.dat lai temp.bin (vai jebkuru citu vārdu, kas beidzas. Bin pagarinājumu).

   Note: You may need to uncheck “Hide extensions for known files types” option in the “Folder Options” under “Tools” menu to see the .dat extension in order to rename it. Piezīme: Jums var būt nepieciešams neatķeksējiet "Slēpt paplašinājumus par zināms failus veidi" opciju uz "Folder Options" sadaļā "Tools" izvēlnes, lai aplūkotu. Dat pagarināšanu, lai pārdēvētu to.

10. Connect the Eten device to AC power adapter for charging to ensure that power supply is consistent to safeguard against and avoid ROM firmware update failure due to insufficient battery power on the mobile device. Pievienojiet eTEN ierīci AC adapteri iekasēšanas, lai nodrošinātu, ka enerģijas padeve ir saskaņota, lai aizsargātu pret un izvairītos no ROM firmware update mazspējas dēļ nepietiekami akumulatoru jauda uz mobilo ierīci.
11. Slot in the memory card into the Eten Glofiish mobile device. Slots ar atmiņas karti eTEN Glofiish mobilo ierīci.
12. Ensure that the device is not connected to desktop or laptop computer via ActiceSync or Windows Mobile Device Center with USB cable. Pārliecinieties, ka ierīce nav savienota ar galddatoru vai klēpjdatoru, izmantojot ActiceSync vai Windows Mobile Device Center ar USB kabeli.
13. In the Eten Glofiish Windows Mobile device, run File Explorer . In eTEN Glofiish Windows Mobile ierīci, vadīt File Explorer.
14. Navigate to the SD memory card folder, ie \SDMMC . Virzīties uz SD atmiņas kartes mapes, ti, \ SDMMC.
15. Click on USBDLUpdate_Console.exe to start the soft boot loader to trigger Bootloader mode. Noklikšķiniet uz USBDLUpdate_Console.exe sākt mīksto boot loader, lai iedarbinātu Bootloader režīmā.
16. The soft bootloader will load bootcode in RAM, jumps to the bootcode and then kills Windows Mobile operating system. Mīksto bootloader būs slodze bootcode in RAM, lec uz bootcode un tad nogalina Windows Mobile operētājsistēmu. Finally the LCD screen will reset and turn into the console mode. Visbeidzot, LCD ekrāns būs reset un pārvērsties Konsoles režīmā.

    Alternative method: If soft bootloader method above doesn't work, set the Eten Glofiish mobile device into Bootloader mode by pressing and holding Power and Voice Commander buttons simultaneously, and then press the Reset button. Alternatīva metode: Ja mīksti bootloader metode iepriekš nedarbojas, kas eTEN Glofiish mobilo ierīci vērā Bootloader režīmā, nospiežot un turot Power un Balss komandieris pogas vienlaicīgi, un tad nospiediet Reset pogu. Remove the stylus but don't release and continue to hold the Power and Voice Command buttons. Noņemiet spalvai, bet nav release un turpināt turiet Power un Voice Command pogas. The device should starts in Bootloader mode. Ierīce ir sākas Bootloader režīmā.

    Note: If “Find SDMMC Card” or “SDMMC Load Fail” error message is been shown on the device's LCD, the SD memory card is probably not compatible with the Eten device. Piezīme: Ja "Atrast SDMMC Card" vai "SDMMC Load Fail" kļūdas paziņojums ir ticis norādīts uz ierīces LCD, ar SD atmiņas karti, iespējams, nav saderīga ar eTEN ierīci. Try another SD card or try to reformat the SD card again with FAT filesystem and repeat the process. Izmēģiniet citu SD karti vai mēģiniet formāts SD karti atkal ar FAT filesystem un atkārtojiet procesu.

17. The ROM firmware OS software update should begin automatically and the device will be flashed with the ROM on the MicroSD-card. Par ROM firmware OS programmatūras atjauninājumu jāsāk automātiski un ierīce būs flashed ar ROM par MicroSD karti. The screen will show some text as below: Ekrāna rādīs tekstu šādi:
    

    USB Downloader 0021 USB Downloader 0021
    Flash Capacity=256MB Flash Jauda = 256MB

    USB Downloader Ready. USB Downloader Ready.
    SD Card In SD kartes
    Find SDMMC Card. Atrast SDMMC karti.
    File= temp BIN File = temp BIN
    Program Image from SDMMC Program Image no SDMMC
    update usb downloader update usb Downloader
    please waiting. lūdzu gaidīšana.

    The update will take a slightly longer time when comparing to the usual ROM update via ActiveSync or WMDC with USB cable connected between Eten device and desktop or notebook computer, due to the slower data loading transfer rate and speed from SD card to Eten device. Atjauninājumā būs nedaudz ilgāku laiku, salīdzinot ar parastajiem ROM update via ActiveSync vai WMDC ar USB kabeli, kas saistīti starp eTEN ierīci un desktop vai notebook computer, sakarā ar lēnāku datu kravas pārsūtīšanas ātrums un ātrumu no SD kartes eTEN ierīci. The whole process may takes 20 to 30 minutes Viss process aizņem 20 līdz 30 minūtes

18. The update process complete when the message of USB host is not connected yet is shown on LCD screen. Atjauninātajā procesu pabeigtu, kad vēstījums USB uzņēmēja nav savienota vēl ir redzams uz LCD ekrāna. At this point, soft-reset the Windows Mobile device, and the new version of ROM OS software is successfully installed. Šajā brīdī, rekomendējoša atjaunotu Windows Mobile ierīci, un jauno versiju ROM OS programmatūra ir veiksmīgi instalēta.

IMPORTANT : You're reading a machine translated page which is provided "as is" without warranty. SVARĪGI: You're lasījums mašīna tulkoto lapu kas tiek sniegta "kā ir" bez garantijas. Unlike human translation, machine translation does not understand the grammar, semantics, syntax, idioms of natural language, thus often produce inaccurate and low quality text which is misleading and incomprehensible. Atšķirībā no cilvēka translation, mašīntulkošanas nesaprot tiesvedības gramatika, semantiku, sintaksi, Idioms dabas valodā, tādējādi bieži vien uzrādīt neprecīzus un zemas kvalitātes tekstu, kas ir maldinoša un neizprotams. Thus, please refer to Tātad, lūdzu, atsaukties uz original English article oriģināls angļu rakstu when in doubt. kad apšaubīta.

Related Articles Saistītie raksti

• Download ClearTemp 1.0 for Windows Mobile Device to Free up Memory Storage Download ClearTemp 1,0 Windows Mobile Device lai atbrīvotu Memory Storage
• Windows Mobile Device Cannot Connect (or Quickly Disconnect or Drop) and Not Sync with Vista WMDC (ActiveSync) Windows Mobile Device Can't Connect (vai Ātri Atvienot vai Drop), nevis Sinhroniz ar Vista WMDC (ActiveSync)
• USB Unknown Device Drive Issue, Not Working, Recognized or Connected Error After Upgrading and Installing Vista SP1 USB Unknown Device Drive Issue, nevis darba, atzīst vai Saistītie kļūdu Pēc Upgrading un instalēšana Vista SP1
• Update or Upgrade to Zune 2.5 for Much Wanted Features (Direct Download Link) Update vai Atjaunināt uz Zune 2,5 daudz Wanted Features (Direct Download Link)
• Download Softick Card Export II Trial to Emulate Windows Mobile as Portable Hard Disk Download Softick Card Export II Trial pārņemt Windows Mobile, kā Portable Hard Disk
• Windows Vista Cannot Auto Find Driver for New USB Device Plugged In Windows Vista Cannot Auto Atrast Driver Jauno USB Device Plugged In
• Download WeFi Beta 1.33 Version for Windows Mobile Device to Find Hot Spots and Connected Anywhere Download WeFi Beta 1,33 Version Windows Mobile Device atrast karstos punktus un Saistītie Jebkura vieta
• ReadyBoost Not Working or USB Flash Key Stick Not Support or Enabled In Windows Vista SP1 ReadyBoost nedarbojas vai USB Flash Galvenie Stick neatbalsta vai Enabled Windows Vista SP1
• Download Microsoft Windows Live for Windows Mobile (G2) WM6 Device Lejupielādēt Microsoft Windows Live for Windows Mobile (G2) WM6 Device
• Windows Vista SP1 To Force Install on Windows Update as 'Critical' from April 18 Windows Vista SP1 Lai Force Install Windows Update par "kritisko" no aprīļa 18

This entry was posted on Friday, May 23rd, 2008 at 11:44 pm and is filed under Šis ieraksts tika publicēta piektdiena, maijs 23., 2008 pie 11:44 un ir iesniegts saskaņā ar Application for Mobile Devices Pieteikums Mobile Devices , , Tips & Tricks Padomi un triki . . You can follow any responses to this entry through the Jūs varat sekot atbildes uz šo ierakstu, izmantojot RSS 2.0 RSS 2.0 feed. You can barību. Varat leave a response atstāt atbilde , or , Vai trackback Trackback from your own site. no jūsu vietā.