Flash Upgrade Eten Glofiish Windows Mobile Device ROM Firmware OS from SD Memory Card (Fix RAPIcopyfile or Update Error in Vista) Flash Atnaujinkite eTEN Glofiish Windows Mobile Device ROM Firmware OS SD Memory Card (Fix RAPIcopyfile arba naujinimas Klaida Vista)
Windows Vista, Windows Mobile Device Center and WM based Pocket PC Phone are all products from or related to Microsoft, but unfortunately integration between them is not with ease and there are plenty of compatibility error between them. Windows Vista, Windows Mobile Device Center ir WM pagrįstas Pocket PC Phone visi produktai iš arba susijusią su "Microsoft", bet, deja, integraciją tarp jų nėra lengvai ir yra daug suderinamumo klaida tarp jų. When user run the Eten Glofiish ROM image update software which contains the ROM Update Utility and ROM image to flash update the firmware OS software via Windows Mobile Devicve Center (WMDC) on USB connection in Windows Vista, the ROM upgrade flashing process fails and simply doesn't work. Kai vartotojas paleisti eTEN Glofiish ROM vaizdą atnaujina programinę įrangą, kuri yra ROM Update Utility ir ROM vaizdą Flash atnaujinti aparatinę OS programinę įrangą per Windows Mobile Devicve centras (WMDC) į USB jungtis, Windows Vista, kad ROM blyksintis nepavyksta ir tiesiog neturi 't darbą.
The ROM Update Utility cannot transfer the new version of ROM image update to the Windows Mobile device, while the device LCD screen display shows USB Downloader Ready and USB connected, and then waiting for download, but no download is ever receiving. Į ROM Update Utility negalima perkelti į naują versiją ROM vaizdą atnaujinti į Windows Mobile prietaisas, o prietaisas LCD ekrano rodo USB Downloader parengties ir USB prijungti, tada laukia parsisiųsti, bet ne atsisiųsti amžius gauti. It's also possible that USB is not connected with USB Host is not connected yet error message. Taip pat įmanoma, kad USB nėra sujungtas su USB Host nėra prijungtas dar klaidos pranešimą. Then, the Eten Glofiish ROM OS updater will prompt various error message saying upgrading fails, USB not connected, unable to transfer the firmware OS image, RAPIcopyfile error and etc. Tada, kad eTEN Glofiish ROM OS atnaujinimas paskatins įvairius klaidos pranešimą: modernizavimo nepavyksta, USB nesujungti, negali pervesti aparatinę OS įvaizdį, RAPIcopyfile klaidos ir tt
The error affects almost all models of Eten Glofiish Windows Mobile (Pocket PC Phone) devices, such as M500, M800, M810, X500, X510, X600, X800 and etc. The cannot or unable to flash upgrade the ROM firmware OS problem affects only Windows Vista operating system. Klaida daro poveikį beveik visų modelių eTEN Glofiish Windows Mobile (Pocket PC Phone) įtaisai, pavyzdžiui, M500, M800, M810, X500, X510, X600, X800 ir tt negali arba negali Flash atnaujinti ROM firmware OS problema tik "Windows Vista" operacinę sistemą. As a workaround to fix and resolve the issue, and to successfully upgrade the Eten Glofiish WM phone to latest version of firmware, user can perform the flash upgrading of firmware OS software in the ROM by using a memory card (SD, MicroSD, MiniSD, SDMMC and etc) using procedure below. Kaip apeiti nustatyti ir išspręsti šią problemą, ir sėkmingai atnaujinti eTEN Glofiish WM telefonas naujausią versiją aparatinę, vartotojas gali atlikti Flash atnaujinimą firmware OS programinė įranga, ROM naudojant atminties kortelės (SD, MicroSD, MiniSD, SDMMC ir tt), naudojant procedūrą. The trick also work for user who wants to update the Eten Glofiish device without using computer. Pavyko taip pat vartotojo, kurie nori atnaujinti eTEN Glofiish prietaisu nenaudojant kompiuterio.
- Download the latest version of ROM image OS software update setup installer from Atsisiųskite naujausią versiją ROM įvaizdžio operacinės sistemos programinės įrangos naujinimo diegimo diegimo Eten Support download page ETEN Parama parsisiųsti (Registration and login required). (Registracija ir reikės prisijungti).
- Prepare a memory card (of the type that fits into the Eten Glofiish mobile device), and has the size of between 512 KB and 1 MB. Parengti atminties kortelę (tipo, kuris atitinka į eTEN Glofiish mobiliojo prietaiso), o dydis nuo 512 KB iki 1 MB. Format the memory card as FAT file system (FAT32 is not acceptable), and ensure that the Flash memory card is empty without any other file or folder. Formatuoti atminties kortelę, kaip failų sistema FAT (FAT32, yra nepriimtinas), ir užtikrinti, kad Flash atminties kortelės tuščias be jokio kito failo arba aplanko.
- In the PC, run the installer (.exe) of the ROM image update without plugging in or connecting the Eten Glofiish mobile device to the computer through USB cable and Microsoft WMDC (ActiceSync). Į kompiuterį, paleiskite programą (. Exe) iš ROM vaizdą atnaujinti be prijungti arba jungiantis eTEN Glofiish mobiliojo prietaiso prie kompiuterio per USB kabelį ir Microsoft WMDC (ActiceSync).
- After the installation, on reaching the ROM image updater welcome greeting screen where End User Update (EUU) window title and Welcome to Device Software Update Utility is shown. Įdiegus dėl pasiekti ROM vaizdą atnaujinimas sveikintinas sveikinimo ekrane, kai galutiniam vartotojui naujinimas (EUU) lango pavadinimą ir Sveiki atvykę į Device Software Update Utility rodomas. Leave the window or dialog opens. Palik lango ar langas.
- Open Windows Explorer, and navigate to the following folder: Atidarykite Windows Explorer ir pereikite į kitą aplanką:
C:\Documents and Settings\<user name>\Local Settings\Temp C: \ Documents and Settings \ <nazwa użytkownika> \ Local Settings \ Temp
Note: It's easier if you clear out and delete everything inside the Temp folder before running the Firmware Updater setup program. Pastaba: Tai yra lengviau, jei aišku, ir ištrinkite viską viduje Temp katalogą prieš pradedant Firmware atnaujinimo programą.
- Search and locate the following 2 files inside the Temp folder: Ieškoti ir rasti po 2 failų viduje Temp katalogą:
temp.dat (about 60 MB) temp.dat (apie 60 MB)
USBDLUpdate_Console.exe (about 4KB) USBDLUpdate_Console.exe (apie 4KB) - Insert the memory card into a card reader linked to the computer. Įdėkite atminties kortelę į kortelių skaitytuvą, susijusios su kompiuterių.
- Copy the two files (temp.dat and USBDLUpdate_Console.exe) into the blank memory card in root directory. Nukopijuokite du failus (temp.dat ir USBDLUpdate_Console.exe) į tuščią atminties kortelę į namų katalogą.
- Rename the file extension for temp.dat to temp.bin (or any name ending in .bin extension). Pervardyti failo išplėtimas temp.dat į temp.bin (arba pavadinimas baigiasi. Bin pratęsimas).
Note: You may need to uncheck “Hide extensions for known files types” option in the “Folder Options” under “Tools” menu to see the .dat extension in order to rename it. Pastaba: Gali tekti nuimti varnelę "Slėpti plėtros žinomų rinkmenų tipų" variantą, "Aplanko parinktys" ir meniu "Įrankiai" norėdami pamatyti. Dat išplėtimas siekiant pakeisti jos pavadinimą.
- Connect the Eten device to AC power adapter for charging to ensure that power supply is consistent to safeguard against and avoid ROM firmware update failure due to insufficient battery power on the mobile device. Prijunkite eTEN prietaiso maitinimo adapteris apmokestinimo, siekiant užtikrinti, kad elektros energijos tiekimas yra nuosekli, siekiant apsisaugoti nuo bei išvengti ROM firmware atnaujinti nepakankamumą dėl nepakankamos baterijos dėl mobiliojo prietaiso.
- Slot in the memory card into the Eten Glofiish mobile device. Lizdas į atminties kortelę į eTEN Glofiish mobiliojo prietaiso.
- Ensure that the device is not connected to desktop or laptop computer via ActiceSync or Windows Mobile Device Center with USB cable. Užtikrinti, kad prietaisas yra prijungtas prie darbo stalo arba nešiojamąjį kompiuterį per ActiceSync arba Windows Mobile Device Center su USB kabeliu.
- In the Eten Glofiish Windows Mobile device, run File Explorer . Į eTEN Glofiish Windows Mobile prietaisas, paleiskite File Explorer.
- Navigate to the SD memory card folder, ie \SDMMC . Vykti į atminties kortelę SD aplanko, ty \ SDMMC.
- Click on USBDLUpdate_Console.exe to start the soft boot loader to trigger Bootloader mode. Spauskite ant USBDLUpdate_Console.exe pradėti minkštųjų įkėliklis sukelti bootloadera režimu.
- The soft bootloader will load bootcode in RAM, jumps to the bootcode and then kills Windows Mobile operating system. Minkšti bootloadera kraunamas bootcode į RAM, šuoliai į bootcode tada zabije Windows Mobile operacinę sistemą. Finally the LCD screen will reset and turn into the console mode. Galiausiai LCD ekranas bus iš naujo ir virsta konsolės režimu.
Alternative method: If soft bootloader method above doesn't work, set the Eten Glofiish mobile device into Bootloader mode by pressing and holding Power and Voice Commander buttons simultaneously, and then press the Reset button. Alternatyvus būdas: Jei minkštos bootloadera metodas tai neveikia, nustatyti eTEN Glofiish mobiliojo prietaiso į bootloadera režimu paspausdami ir laikydami galios ir Balso komandos mygtukus vienu metu, ir paspauskite mygtuką Reset. Remove the stylus but don't release and continue to hold the Power and Voice Command buttons. Išimkite adata, o ne išleisti ir toliau laikykite Maitinimo ir Balso komandų mygtukų. The device should starts in Bootloader mode. Prietaisas turi prasideda bootloadera režimu.
Note: If “Find SDMMC Card” or “SDMMC Load Fail” error message is been shown on the device's LCD, the SD memory card is probably not compatible with the Eten device. Pastaba: Jei "Rasti SDMMC kortelė" arba "SDMMC Load Fail" klaidos pranešimas rodomas dėl prietaiso LCD, SD atminties kortelė greičiausiai nėra suderinama su eTEN prietaiso. Try another SD card or try to reformat the SD card again with FAT filesystem and repeat the process. Pabandykite kitą SD kortelės arba pabandyti formatuoti SD kortelės vėl su FAT failų sistema, ir pakartokite šį procesą.
- The ROM firmware OS software update should begin automatically and the device will be flashed with the ROM on the MicroSD-card. Į ROM firmware OS programinės įrangos atnaujinimas turėtų prasidėti automatiškai ir prietaisas bus uždėtinį su ROM į MicroSD kortelė. The screen will show some text as below: Ekrane bus rodomas tekstas, kaip nurodyta toliau:
USB Downloader 0021 USB-Downloader 0021
Flash Capacity=256MB Flash Talpa = 256MBUSB Downloader Ready. USB-Downloader Ready.
SD Card In SD Card Į
Find SDMMC Card. Rasti SDMMC kortelę.
File= temp BIN File = temp BIN
Program Image from SDMMC Programos vaizdų iš SDMMC
update usb downloader atnaujinti usb Downloader
please waiting. Prašome palaukti.The update will take a slightly longer time when comparing to the usual ROM update via ActiveSync or WMDC with USB cable connected between Eten device and desktop or notebook computer, due to the slower data loading transfer rate and speed from SD card to Eten device. Šis naujinimas bus šiek tiek daugiau laiko, lyginant su įprastomis ROM atnaujinti per ActiveSync ar WMDC USB kabelis prijungtas tarp Eten įrenginį ir darbalaukį arba nešiojamasis kompiuteris, dėl to lėčiau duomenų pakrovimo perdavimo greitis ir greičio SD kortelę eTEN prietaiso. The whole process may takes 20 to 30 minutes Visas procesas trunka nuo 20 iki 30 minučių
- The update process complete when the message of USB host is not connected yet is shown on LCD screen. Atnaujinimo procesas baigtas, kai pranešimą USB host nėra prijungti dar yra ant ekrano LCD. At this point, soft-reset the Windows Mobile device, and the new version of ROM OS software is successfully installed. Šiuo metu, soft-reset Windows Mobile įrenginių ir naują versiją ROM OS programinė įranga sėkmingai įdiegta.
IMPORTANT : You're reading a machine translated page which is provided "as is" without warranty. SVARBU: You're reading mašina išverstą puslapį, kuri yra pateikiama "kaip yra" be garantijų. Unlike human translation, machine translation does not understand the grammar, semantics, syntax, idioms of natural language, thus often produce inaccurate and low quality text which is misleading and incomprehensible. Skirtingai nuo žmogaus vertimas, mašininio vertimo nesupranta gramatika, semantika, sintaksė, frazeologizm natūralios kalbos, todėl neretai netiksli ir žemos kokybės teksto, kuris yra klaidinančios ir nesuprantami. Thus, please refer to Taigi, prašome kreiptis į original English article originalas anglų straipsnis when in doubt. kai kyla abejonių.
Related Articles Susiję straipsniai
- Download ClearTemp 1.0 for Windows Mobile Device to Free up Memory Storage Atsisiųsti ClearTemp 1,0 Windows Mobile Device atlaisvinti atminties saugojimas
- Windows Mobile Device Cannot Connect (or Quickly Disconnect or Drop) and Not Sync with Vista WMDC (ActiveSync) Windows Mobile Device Nepavyko prisijungti (arba greitai atsijungti arba sumažėjimas), o ne Sinchr su Vista WMDC (ActiveSync)
- USB Unknown Device Drive Issue, Not Working, Recognized or Connected Error After Upgrading and Installing Vista SP1 USB Nežinoma įrenginys disko numeris, ne darbo, pripažintos arba Connected klaida po atnaujinimo ir įdiegti Vista SP1
- Update or Upgrade to Zune 2.5 for Much Wanted Features (Direct Download Link) Atnaujinti atnaujinti Zune 2.5 Daug Ieško ypatybės (Direct Download Link)
- Download Softick Card Export II Trial to Emulate Windows Mobile as Portable Hard Disk Atsisiųsti Softick kortelė Eksporto II Bandomoji emulacja Windows Mobile kaip Portable Hard Disk
- Windows Vista Cannot Auto Find Driver for New USB Device Plugged In Windows Vista negali Auto Rasti Driver Naujas USB įrenginys įjungtas
- Download WeFi Beta 1.33 Version for Windows Mobile Device to Find Hot Spots and Connected Anywhere Atsisiųsti WeFi Beta 1,33 Versija Windows Mobile Rasti Hot Spots ir Connected Anywhere
- Download Microsoft Windows Live for Windows Mobile (G2) WM6 Device Atsisiųsti Microsoft Windows Live for Windows Mobile (G2) WM6 Device
- ReadyBoost Not Working or USB Flash Key Stick Not Support or Enabled In Windows Vista SP1 ReadyBoost neveikia arba USB Flash raktas Stick Ne palaikymo ar įjungtas Windows Vista SP1
- Windows Vista SP1 To Force Install on Windows Update as 'Critical' from April 18 "Windows Vista SP1 Norėdami pajėgų Įdiekite" Windows Update kaip "ypatingos svarbos" nuo balandžio 18










































May 29th, 2009 15:24 Gegužė 29, 2009 15:24
hi labas
thanzxxxx thanzxxxx
May 17th, 2009 17:05 Gegužė 17, 2009 17:05
Thank you! Ačiū!
It worked like a charm on M800 Jis dirbo kaip žavesio dėl M800
hamen hamen
March 2nd, 2009 22:37 Kovas 2, 2009 22:37
Thank you for your help! Dėkojame už pagalbą!
February 27th, 2009 03:58 Vasaris 27, 2009 03:58
I tried the sync way and get the same OS image is not compatible with this hardware, and then I tried the flash card way and keep getting sdmmc load fail, I reformatted the card twice but no fix. Aš išbandžiau naudoti sinchronizavimo būdas ir gauti tą patį OS atvaizdą nėra suderinami su šiuo įrangos, ir tada aš bandžiau Flešas būdu ir nuolat gauti sdmmc įkelti nepavyksta, aš performatuoti kortelę du kartus, bet ne nustatyti. What else can I try? Ką dar galiu pabandyti?
February 20th, 2009 08:05 Vasaris 20, 2009 08:05
I have Eten Glofiish x600, and I downloaded the x600 ROM update exe from the eten.com; and Aš eTEN Glofiish X600, ir aš parsisiuntėte X600 ROM atnaujinti Exe iš eten.com; ir
I observed your instructions step by step (…temp.bin…FAT…); I pastebėjo jūsų nurodymus ir žingsnis po žingsnio (... temp.bin ... RIEBALŲ ...);
but in the bootloader mode: OS Image is NOT compatible with this hardware. bet bootloader būdas: OS Nuotrauka neatitinka šio kompiuterio.
I tried with prepared temp.bin ( Aš bandžiau su parengtu temp.bin ( http://www.etenblog.com/2008/03/11/unbrick-your-eten-glofiish/) http://www.etenblog.com/2008/03/11/unbrick-your-eten-glofiish/) , but this way was wrong too. , Tačiau tokiu būdu buvo neteisingai per.
Please, help me! Please, help me!
Thanks! Ačiū!
February 5th, 2009 01:03 5 vasaris 2009 01:03
Dude, this is the best tutorial for upgrading ROM on X500. Dude, kad tai geriausias vadovėlis modernizavimo ROM X500. I've tried like 7-8 ways and non worked, until I found this one. I've tried kaip 7-8 būdais ir ne dirbo, kol aš tau viena.
Many thanks! Many thanks!