Endless Reboot Loop While “Configuring Updates: Stage 3 of 3″ During Vista SP1 Installation无休止的重新启动环虽然“配置更新：第3阶段3 ”在Vista的SP1安装

In the middle of the process to install中间的安装过程 Windows Vista SP1 Windows Vista的SP1的 , when the on-screen status message showing “Configuring updates: Stage 3 of 3 - 0% complete”, the system will suddenly going into shutdown and reboot.当屏幕上的状态讯息显示“配置更新：第3阶段的3 -0 ％完成”时，系统会突然进入关机和重新启动。 Worse still, after computer starts up again, it will comes to the same configuration screen, and goes into reboot again.更糟糕的是，计算机启动后，再次，将是相同的配置屏幕，并进入再次启动。 The computer restarts error repeated itself again and again, causing endless reboot loop.在计算机重新启动的错误重演一次又一次，造成了无休止的重新启动循环。 The symptom also happens when boot into Safe Mode.症状还当开机进入安全模式。 Of course, the service pack update is not installed successfully.当然，更新服务包没有安装成功。

This problem occurs when Windows Update is installing update 937287 for Windows Vista, according to Microsoft发生此问题时， Windows Update是更新937287安装的Windows Vista ，根据微软 KB949358 , which should has been应已 fixed with publishing of KB949939固定出版KB949939 . 。 If you’re still encountering the problem, try the following steps to get your system working again.如果您仍然遇到问题，尝试以下步骤让您的系统工作了。

Method 1: 方法1 ： Start Windows Vista by using the Windows installation media 启动Windows Vista使用Windows安装媒体 , and then select the “Repair your computer” option ，然后选择“修复计算机”选项

Note: If the computer came with Windows Vista preinstalled, you may not have Windows installation media.注：如果您的电脑是与Windows Vista预装，您可能没有Windows安装媒体。 If you do not have Windows installation media, go to method 2.如果你没有Windows安装媒体，请转到方法2 。

1. Insert the Windows Vista installation disc in the DVD drive, and then restart the computer.插入Windows Vista安装光盘中的DVD驱动器，然后重新启动计算机。
2. Press any key when you are prompted to start from the disc. 按任意键时，系统会提示您从光盘。

   Note: If the computer is not configured to start from a CD or from a DVD, you have to change the BIOS settings to set first boot device to CD/DVD drive.注意：如果计算机没有配置为从CD或DVD时，你必须更改BIOS设置，设置第一启动设备，以CD / DVD驱动器。

3. When you are prompted, configure the Language to install , Time and currency format , and Keyboard or input method options that you want, and then click Next .当提示您，设定的语言来安装，时间和货币格式，键盘或输入法您想要的选项， 然后单击下一步。
4. On the next page, click Repair your computer .在接下来的页面上，按一下修复您的计算机。
5. On the System Recovery Options page, click the version of the Windows Vista operating system that you want to repair, and then click Next .在系统恢复选项页面上，按一下版本的Windows Vista操作系统，你要修复，然后单击下一步。
6. On the System Recovery Options page, click System Restore .在系统恢复选项页上，单击系统还原。
7. On the System Restore page, click Next .在系统还原页上，单击下一步。
8. Select a restore point at which you know that the operating system was working, and then click Next .选择一个恢复点，你知道，操作系统的工作，然后单击下一步。

   The restore point should be a date that occurred before you experienced the problem that is described in the “Symptoms” section.还原点应该是一个日期，发生在您遇到这个问题中所描述的“症状”一节。 To select this date, use the Choose a different restore point option, and then click Next .要选择此日期，使用选择不同的还原点选项， 然后单击下一步。

9. If you are prompted for a disk to restore, select the disk to which the operating system is installed, and then click Next .如果系统提示您输入磁盘恢复，选择该磁盘安装操作系统，然后单击下一步。
10. On the Confirm your restore point page, click Finish .在确认您的还原点页上，单击完成。
11. When the restoration process is complete, click Restart .当恢复过程完成后， 单击重新启动。

Method 2: Start the computer in safe mode, and then use the Repair or System Restore feature 方法2 ：启动电脑在安全模式，然后使用修复或系统还原功能

1. Make sure that there are no floppy disks, CDs, or DVDs in the computer, and then start the computer.请确认没有软盘，光盘，或DVD的计算机，然后启动计算机。
2. Use one of the following procedures, as appropriate for your situation:使用下列其中一个程序，根据您的具体情况：
   • If the computer has a single operating system installed, press and then hold the F8 key as the computer starts.如果您的电脑有一个单一的安装作业系统，新闻和然后按住F8键作为计算机启动。 You have to press F8 before the Windows logo appears.你必须按下F8之前， Windows徽标出现。 If the Windows logo appears, you must try again by turning off the computer and then restarting the computer.如果Windows标志出现，您必须再试一次关闭计算机，然后重新启动计算机。
   • If the computer has more than one operating system installed, use the arrow keys to highlight the operating system that you want to start in safe mode, and then press F8 .如果您的电脑有一个以上的作业系统安装，使用箭头键突出的作业系统要启动安全模式，然后按下 F8 。
3. On the Advanced Boot Options screen, use the arrow keys to select the safe mode option that you want, and then press ENTER.在高级启动选项屏幕上，使用箭头键选择安全模式选项，您想要的，然后按Enter 。
4. Log on to the computer by using a user account that has administrator rights.登录到计算机通过使用用户帐户具有管理员权限。
5. Click Start , type system restore in the Start Search box, and then click System Restore under the Programs section. 单击开始， 键入系统还原在开始搜索框，然后单击系统还原下的程序一节。 Alternatively, type in rstrui.exe .另外，在rstrui.exe类型。

   When you are prompted by the User Account Control feature, click Continue .当提示您的用户帐户控制功能， 单击继续。

6. On the System Restore page, click Next .在系统还原页上，单击下一步。
7. Select a restore point at which you know that the operating system was working, and then click Next .选择一个恢复点，你知道，操作系统的工作，然后单击下一步。

   The restore point should be a date that occurred before you experienced the problem that is described in the “Symptoms” section.还原点应该是一个日期，发生在您遇到这个问题中所描述的“症状”一节。 To select this date, use the Choose a different restore point option, and then click Next .要选择此日期，使用选择不同的还原点选项， 然后单击下一步。

8. If you are prompted for a disk to restore, select the disk to which the operating system is installed, and then click Next .如果系统提示您输入磁盘恢复，选择该磁盘安装操作系统，然后单击下一步。
9. On the Confirm your restore point page, click Finish.在确认您的还原点页上，单击完成。
10. When the restoration process is complete, click Restart .当恢复过程完成后， 单击重新启动。

Method 3: Rename the Pending.xml file (and optionally CleanUp.xml), and then edit the registry 方法3 ：重新命名Pending.xml文件（和可选CleanUp.xml ） ，然后编辑注册表

This method provides a mean for users have tried all other methods but failed to recover, and computer has no restore points or cannot start to a repair option that offers the这种方法提供了一个意味着用户已经尝试了所有其他方法，但未能恢复，没有电脑的还原点或无法启动的修复选项，提供了 System Restore feature系统还原功能 . 。 However, it’s just a way to recover computer to bootable state, which users should determine if there is still problem with updating process, and decide whether to backup the data and reinstall Windows.然而，这只是一种方式收回电脑开机状态，用户应确定是否仍然存在问题，更新过程，并决定是否将备份数据和重新安装Windows 。

1. Insert the Windows Vista installation disc in the DVD drive, and then restart the computer.插入Windows Vista安装光盘中的DVD驱动器，然后重新启动计算机。
2. Press any key when you are prompted to restart from the disc. 按任意键时，系统提示您重新启动的光盘。
3. When you are prompted, configure the Language to install , Time and currency format , and Keyboard or input method options that you want, and then click Next .当提示您，设定的语言来安装，时间和货币格式，键盘或输入法您想要的选项， 然后单击下一步。
4. On the Install Windows page, click Repair your computer .在安装Windows页面上，按一下修复您的计算机。
5. On the System Recovery Options page, click the version of the Windows Vista operating system that you want to repair, and then click Next .在系统恢复选项页面上，按一下版本的Windows Vista操作系统，你要修复，然后单击下一步。
6. On the System Recovery Options page, click Command Prompt .在系统恢复选项页面上，按一下命令提示符。
7. Type cd C:\windows\winsxs , and then press ENTER. 键入 cd C ： \ 窗户\ winsxs ，然后按Enter 。
8. Type r en pending.xml pending.old , and then press ENTER. R型恩pending.xml pending.old ，然后按Enter 。

   Note: If pending.xml alone doesn’t work to resolve problem, try to rename also cleanup.xml .注意：如果pending.xml本身并不努力解决问题，尝试重命名也cleanup.xml 。

9. Type regedit , and then press ENTER. 键入 regedit ，然后按Enter 。
10. Select HKEY_LOCAL_MACHINE .选择HKEY_LOCAL_MACHINE 。
11. On the File menu, click Load Hive . 在文件菜单上， 单击加载配置单元。
12. Locate the following folder:找到以下文件夹：

    C:\windows\system32\config\components ç ： \窗户\ system32 \设置\组件

13. When you are prompted for a name, type Offline_Components .当提示您的名称，类型Offline_Components 。
14. In Registry Editor, locate and then delete the following registry subkey:在注册表编辑器，找到并删除以下注册表子项：

    HLKM\Offline Components\AdvancedInstallersNeedResolving HLKM \脱机组件\ AdvancedInstallersNeedResolving

15. In Registry Editor, locate and then delete the following registry subkey:在注册表编辑器，找到并删除以下注册表子项：

    HKLM\Offline Components\PendingXmlIdentifier HKLM \脱机组件\ PendingXmlIdentifier

16. Exit Registry Editor, type exit at the command prompt, and then press ENTER.退出注册表编辑器，键入exit在命令提示符，然后按Enter 。
17. Click Restart , Windows should boot into the same “Configuring updates” screen, but the screen will disappear in a short while, and system will be able to boot into desktop. 单击重新启动， Windows应该启动到相同的“配置更新”屏幕，但屏幕就会消失在很短的一段时间，系统将能够启动到桌面。

Note: Failure to delete the registry keys in method 3 will cause check user unable to check for latest updates in Windows Update with error code 8000ffff.注意：如果删除的注册表项的方法3会导致用户无法检查，检查最新的更新在Windows更新，错误代码8000ffff 。

IMPORTANT : You're reading a machine translated page which is provided "as is" without warranty. 重要：您正在阅读的机器翻译网页这是“原样”提供，无保修。 Unlike human translation, machine translation does not understand the grammar, semantics, syntax, idioms of natural language, thus often produce inaccurate and low quality text which is misleading and incomprehensible.不同人的翻译，机器翻译不明白的语法，语义，句法，成语自然语言，因此，往往产生不准确，低质量的文字这是误导和费解。 Thus, please refer to因此，请参阅 original English article英文原文的文章 when in doubt.当怀疑。

Related Articles相关文章

• Windows XP SP3 BSoD Endless Reboot Loop with Stop c0000139 on GDI32.dll Error Windows XP的SP3的BSoD无休止的重新启动与停止回路c0000139错误的GDI32.dll
• Troubleshoot Why Vista SP1 Is Not Available or Offered for Installation in Windows Update or Automatic Updates解决Vista的SP1的，为什么不提供或提供安装在Windows Update或自动更新
• How to Open Windows Vista Recovery Environment (RE) Console from Installation CD如何打开Windows Vista的恢复环境（重新）控制台从安装CD
• Microsoft Resumes Installation of Vista KB949939 and KB937287 Prerequisite via Windows Update重新安装微软的Vista KB949939和KB937287的先决条件通过Windows更新
• Fix USB Issues in Windows Vista with KB941600 Cumulative Updates for USB Core Components修正USB问题在Windows Vista的KB941600累积更新的USB核心组件
• System Halt 0xc0000034 Error When Boot Up After Installing Windows Vista SP1系统停止0xc0000034错误时开机后，安装Windows Vista SP1的
• Windows Server 2008 or Vista Activation Fails When Configure Third Party Firewall to Use HTTPS Authentication to Access Internet Windows Server 2008的或Vista激活失败时，配置防火墙的第三方使用验证的HTTPS访问Internet
• Error Code 0×80070002 During Windows Vista SP1 Setup Install错误代码0 × 80070002在Windows Vista的SP1的安装程序安装
• How Open Command Prompt as Administrator on Elevation in Vista如何打开命令提示符作为管理员，海拔在Vista
• Windows Vista Fails to Boot After Installing SP1 with ntoskrnl.exe 0xc0000098 Error Windows Vista中无法开机后安装SP1与0xc0000098错误的Ntoskrnl.exe

This entry was posted on Monday, April 28th, 2008 at 12:12 am and is filed under 本条目被张贴在星期一， 08年4月28日在上午12时12分，并提交下 Windows Vista Windows Vista中 . 。 You can follow any responses to this entry through the 您可以按照任何反应，这个项目通过 RSS 2.0 2.0 feed. You can 饲料。您可以 leave a response 留下一个反应 , or 或 trackback 引用 from your own site. 从您自己的网站。